xboxscene.org forums
OG Xbox Forums => Modchip Forums => EB2K Chips (X-Chip) => Topic started by: jetskidj on December 01, 2004, 02:06:00 PM
-
I need help with the USB driver thing. When I plug in my USB and direct it to look in the c/programfile/xchip/usbdrive spot it runs for a moment then says that it is unable to install hardware.
After some looking I noticed that in the installation manual that when windows finds the new hardware it says Ez-usb (2131q/2131s/2135s) eeprom missing. My computer only shows USB found.
Thanks in advance.
<
-
You have to install the correct drivers
The drivers come with the X-chip flash program you download at EB2k and install. It will be under program files\Xchip and if memory serves its under the USB folder
Just say you have your own driver etc etc and load up this one and you should be rockin!
This post has been edited by spare72: Dec 2 2004, 12:05 AM <
-
That is what I have been doing. I direct it the install wizard to look for the driver in the folder just like the directions. But it comes back and says unable to install it. Maybee i just need to try another computer with a USB. I have done over a dozen xboxs but never one with the USB thing. Which will be real cool once I get it to work. <
-
My suggestion is to try a new usb port on your computer.. maybe its a bad one..
<
-
will do. I will let you know how it goes.
I was using a brand new computer, but you never know. Thanks for the advice.
<
-
I am having the same problem
I have tried 2 different computers same thing
Maybe wrong software????
Please help <
-
Choose 'C:\Program Files\X-Chip\USB Drivers' from the browse menu, if that doesnt work, check you click every notification you are given by xp and repeat the proccess, there are a few drivers you need to install, i had to do it a couple of times if i remmember right. <