xboxscene.org forums

OG Xbox Forums => No-Modchip Hacks (exploits) => GameSave Exploits => Topic started by: unstoppable77 on February 18, 2006, 03:00:00 PM

Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 18, 2006, 03:00:00 PM
what I mean is what folder of the xbox HDD do I put the splinter cell save game files?
Title: Transfering Game Saves By Hotswap Method
Post by: chorizo1 on February 18, 2006, 03:04:00 PM
E:/UDATA
Title: Transfering Game Saves By Hotswap Method
Post by: [Captain_America] on February 18, 2006, 06:57:00 PM
Yes, it can do anything that any other mod can do. Just so ya kno, NDURE v1.1 has recently been released, it has more XB live capabilities.
Title: Transfering Game Saves By Hotswap Method
Post by: [Captain_America] on February 19, 2006, 11:38:00 AM
it doesnt matter as you will not be using the operating system. You are booting off of the linux disc you made.
Title: Transfering Game Saves By Hotswap Method
Post by: DaJackal on February 19, 2006, 01:33:00 PM
What part is confusing?
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 01:49:00 PM
I dont know how to make the cd and were to put the gamesave on the cd.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 02:06:00 PM
lol I need someone to help me through msn or aim
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 02:16:00 PM
SC uses two gamesaves SC save1 and SC save2.  So go to each folder and unzip the udata.zip file.  You can delete these zip if you want now.  Then copy both save to xboxhdm\linux\E and run make-iso-win.bat, burn iso to cd.

After swapping, and pressing 1, enter.  Type xbrowser and copy the UDATA folders in each saves to E:\ drive.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 02:25:00 PM
thank you very much Flagmax, ill try that right now
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 02:42:00 PM
So that on XBOX you will have
E:/UDATA/5553000c/
and
E:/UDATA/21585554/

Depending on how you unzipped, you might have folders like udata/UDATA/XXXXXXXX, well you need to copy the second UDATA over to XBOX.  Now you should be able to Start the game and Load the Linux save.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 03:01:00 PM
thanks for the info,

for the copying part in the xbrowser do I type  "udata"  as the file I want to copy and "E:\" or "E:\udata" as the destination on the xbox drive?
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 03:51:00 PM
I just tried the the linux thing... I booted up with the CD and press 1 then enter... then typed in xbrower and I didnt see a divided screen with 2 pane's like you say... maybe its becuase I didn't hook up the xbox HD i was just testing to see how the program works before I actually hotswap.
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 04:16:00 PM
Make sure you are using XBOXHDM1.9 and its "xbrowser" without the quetes.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 07:46:00 PM
yes it is 1.9,

I just tried hotswapping and can't get it to work lol....im doing it in blind mode (xbox is not hooked up to the tv) but I counted and its around 8 secs is when the X fully pops out then a few seconds later MS pops out...
On the PC i keep it in pause mode just before it checks the IDE drives, then I connect the Xbox HD and  then I press enter to unpause and it detects the xbox HD but a few seconds later it says primary hard drive failed... any tips on hotswapping?
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 07:51:00 PM
Yah set the jumper on xbox Hard Drive to Master.  Make sure the PC ide cable is Primary Master.  Then its a matter of timing.  I unplug when I see M|croSoft for about a second or so.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 08:38:00 PM
yea I have the jumper in master, should I have the dvd drive IDE unplugged?
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 08:49:00 PM
On xbox?  No.

As you know, the xbox hd locks automatically when it loses power so make sure you leave the xbox power cable plugged in.  Only unplug ide really quick and plug the pc ide cable.

When your pc searches for drives, does it finds the xbox drive?  I noticed if the drive didn't unlock, the PC lags while it seaches drives.  You also get bunch of errors when you run xboxhdm.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 19, 2006, 09:15:00 PM
Yes my PC finds the xbox hard drive then after a while it says "primary hard disk fail" and I have to reboot
I guess that means im not switching IDE cables at the right time and it doesn't unlock it.... I do it right when "MS" pops up under the big X.
Title: Transfering Game Saves By Hotswap Method
Post by: Flagmax on February 19, 2006, 10:01:00 PM
That kinda sounds like your PC tries to boot off the xbox hd first.  Check you PC bios and make sure it set to boot from CDROM first.  I have CDROM connected to Secondary primary cable.

After you Unpause let it boot the xboxhdm then hit Enter and watch the screen, it tries to access the HD and if it says bunch of errors, it did not unlock.  No, errors means its unlocked, run xbrowser now.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 20, 2006, 05:41:00 AM
I have it set so my PC boots from cd-rom which is on my secondary master. I also tried to pause after the PC check for drives and I let the linux thing check and I get alot of errors going down the screen, which means its locked.
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 20, 2006, 06:02:00 PM
lol I finally did it.... But when im in xbrowser I dont know how to copy files from the CD to my xbox HD
Title: Transfering Game Saves By Hotswap Method
Post by: unstoppable77 on February 20, 2006, 06:45:00 PM
Now I finally did it, I hotswapped succesfully and transfered the games saves... the hotswap finally worked because I plugged in the AV cable to the xbox but not the TV.