Post by: rd350ypvs on September 19, 2004, 05:35:00 PM
I use the Splinter Cell hack and get up to the same point as you, after trying to load a dashboard it fails on Error 21, now i have 2 files on the mem card, the splinter cell hack which is called Linux Profile and another called Linux Installer - Install Linux (using AR with AR mem card), both are then copied to the hdd and splinter cell boots up, I choose the Linux Profile, then the media screen loads and then crashes.
Now looking at info on these forums error 21 can come form trying to run unsigned code, is there any code in the mem save hack file from xbins that needs to be signed in order for the hack to work, or is my kernal version not soft moddable without changing the region code and running UDE2 ? In which case i will need to get hold of MA
Another thing, why does the ltools 1.75 SC save hack not drag and drop into the PC database like MA or 007 ? Inside the rar file is 2 more zip files named part1.zip and part2.zip, only these 2 files will successfully drag and drop to the PC database and are inturn called the above file names Linux Profile and Linux Installer, is this correct ?
andyw
Post by: Dunkonya21 on September 21, 2004, 04:48:00 PM
Post by: colecago on September 21, 2004, 05:10:00 PM
Post by: jaylove111 on September 22, 2004, 10:42:00 AM
kernels 5838
dash 5659
1.6 us
I get a ltools sceen like picture and then it goes blank, no sound for the harddrive or anything.
used ltools 1.7.5_SC NTSC
Post by: Dunkonya21 on September 22, 2004, 11:58:00 AM
Post by: rd350ypvs on September 23, 2004, 02:30:00 AM
Post by: hitmanevox-240sx on September 23, 2004, 01:50:00 PM
")
Post by: jaylove111 on September 23, 2004, 04:18:00 PM
when you get to the ltools menu, go back and then the main menu will show up and then you will have options
backup harddrive
run ude
run ude2
went thru the prompts and let it load, then when the light was blinking green, I restarted it
kernels 5838
dash 5659
1.6 us
also check the posts on 1.6 pal, there are step by step instructions
Post by: hitmanevox-240sx on September 23, 2004, 05:51:00 PM
| QUOTE (jaylove111 @ Sep 24 2004, 12:21 AM) |
| I got it when you get to the ltools menu, go back and then the main menu will show up and then you will have options backup harddrive run ude run ude2 went thru the prompts and let it load, then when the light was blinking green, I restarted it kernels 5838 dash 5659 1.6 us also check the posts on 1.6 pal, there are step by step instructions |
it dont load up at that point. after i click checkpoints it just goes black and then that sentance somes up in seven diffrent languages.
Post by: turd_ferguson on September 23, 2004, 06:46:00 PM
I started with the softmod described at:
http://xbox.freeserv...t.net/index.htm
I finally got around the inital problem by erasing all previous non-hack 007 AUF game saves from my hard drive (saves I made while playing the game). Maybe that should have been obvious, but it wasn't for me.
Once I deleted those, everything worked as advertised to a point. I was able to choose install UDE, and since I have a version 1.0 xbox, I chose UDE!.
Now I am getting another problem that maybe someone can help out with. After choosing to install UDE1, I get the following:
correct update.xbe has not been found.
either install dash 4920, 5669 or 5960
or add the update.xbeto the package.
cannot install UDE
Anyone have any ideas? where can I find an ubdate.xbe? In the forums I have read, it is supposed to auto-magically generate one. I have a feeling this is for newer xbox version. I did find a nice forum that got me started (http://forums.xbox-scene.com/index.php?showtopic=249145&hl=4920+update\.xbe) , but then started talking about SlaYer stuff and extracting an iso... seems like a lot of work, especially since I am doing the ltools install.
Post by: Ten-96 on September 23, 2004, 07:27:00 PM
Post by: hitmanevox-240sx on September 24, 2004, 05:28:00 AM
iight first i got the ltool. i got winrar and i un-rar ed it. then ater that there was 2 zip files and i put both on my mem card. after doing that i backed up all of my other splinter cell data on my other memory card. after doing that i deleted all of the splinter cell data that was on my xbox and then copied over both (linux installer and linux profile) unto my hard drive of my xbox. after doing so i started up the xbox with my splinter cell data on it. then as directed i went unto a pprofile that said linux and chose check points then the screen turned black and started to go crazy. the power button was red and green and blinking quick. please i really need helppppp...
Post by: Ryutatsu on September 24, 2004, 01:52:00 PM
Post by: Ten-96 on September 25, 2004, 09:31:00 AM
| QUOTE |
i did this fine, (after a long agrivating time on the forum) heres what you do with AR, 1. get the hack from usual place 2. unzip it 3. take one of the directories from the UDATA dir and put it in its own UDATA folder (if this confuses you, when this is done, you should have two folders called UDATA each with only one folder inside, but those folders are different, one contains the actual SC save and the other has evox) 4. (i had to do this, don't know if its needed) poke around the other saves that came with your AR, look for a file called datelinfo or such, and put that in both of your udata folders 5. now this is the MOST IMPORTANT STEP, make sure that when you zip the files (there should be two seperate zips) inside of the zip there is still the UDATA folder, because sometimes the zip prog will only zip the files inside and ignore the directory they are in, I use power archiever so it might be different in another case, but its never paranoid to double check 6. copy over to your mem card using the included software(cross your fingers that it doesn't say " invald xbox save") 7. (might overlap other tut) now plug your mem card into controller, boot xbox WITHOUT disc, kill all your previous SC saves on your HD (never tried it w/o doing so, but this is what i was told) and copy over the two save files, one should go under SC and the other will be by itself, called LINUXINSTALLER or such i think 8. pop in SC and load the LINUX save (should be only one) 9. again IMPORTANT STEP....DO NOT PICK LEVELS, IT WILL CRASH, instead pick checkpoints and it should load evox, have fun ma boy |
I used this and it worked. I just had to edit the mmx.xml file to change the IP address that ITools uses when it loads. I also had to add ftp settings info. (I also found it through the search forums option.)
Good Luck.
Post by: Ten-96 on September 25, 2004, 03:03:00 PM
Did it work for you? Let me know. I was happy that it finally worked for me.
Post by: Ten-96 on September 26, 2004, 10:49:00 AM
Post by: Ten-96 on September 26, 2004, 06:08:00 PM
First, use whatever unzipping utility program that you have.( ie. winzip or winrar - both available at various freeware websites.)
Then, unzip the file to it's own folder.( Should be named something like 1.7.5 ITools - NTSC)
Next, unzip part1.zip to it's own folder, same for part2.zip; both will contain a UDATA folder. The complicated part comes when you have to get a datel.info file. You can get one from any other xbox game save. If you don't have any you can get them online. Try to get a splinter cell game save. If you want, I can email you one. Once you have the datel.info file, copy it into the folders that are in the UDATA folder. One should be a folder starting with 55... and the other starts with 2....(I'm not sure about the exact numbers. I'm not at my home pc right now.) Open the folders and then copy the datel.info file into both. After that, rezip both UDATA folders. You should then be able to drag and drop them into you Action Replay program; either staright to mem card or to pc database.
Post by: bffelon on September 27, 2004, 06:07:00 PM
Post by: hitmanevox-240sx on September 27, 2004, 06:18:00 PM
Post by: PCBUILDERCHRIS on September 28, 2004, 10:07:00 AM
Post by: demetriojames on September 28, 2004, 10:47:00 AM
Post by: rd350ypvs on October 02, 2004, 05:55:00 AM
***Update using a game that has Xbox live your dash to version 5690***
Apparently, it only works if your xbox has an xbox live tab
1) Download the ltools splinter cell hack and un rar into the 2 files part1.zip and part2 zip
2) Copy this 2 files to your mem card (I used AR), they should come up as Linux Installer and Splinter cell save
3) Copy the 2 files from your mem card to your xbox using the inbuilt msdash on the xbox
4) Boot up Splinter cell, goto load campaign, then choose Linux
5) MXM will load and this next step is the one that catches most people out
6) HOLD B AND PRESS DOWN
this will take you to the UDE1 install, follow the prompts to then install
7) After ltools has made a backup of your hard drive it will copy some files across and modify others, you may then turn off your xbox
Bingo, your xbox is now softmodded
andyw
Post by: dolphumous on October 18, 2004, 11:44:00 AM
| QUOTE (turd_ferguson @ Sep 24 2004, 02:49 AM) |
| I was able to choose install UDE, and since I have a version 1.0 xbox, I chose UDE!. Now I am getting another problem that maybe someone can help out with. After choosing to install UDE1, I get the following: correct update.xbe has not been found. either install dash 4920, 5669 or 5960 or add the update.xbeto the package. cannot install UDE |
I'm getting this error too. It's a firends xbox. He got it on the original release date. It's a Ver1. Also, when I go into Settings --> System Info is doesn't tell me the dashboard number. Just keeps scrolling the copyright notice.
I get into ltools and all is well. Then I get the same error below.
Doesnt work no matter if I have:
update.xbe.zip.zip or
update.xbe.zip
in the files folder.
Help?
Post by: rd350ypvs on October 21, 2004, 02:33:00 AM
andyw
Post by: spacemaster on October 24, 2004, 07:31:00 AM
| QUOTE (rd350ypvs @ Oct 21 2004, 10:36 AM) |
| just use a Xbox live game to update your dash, then run UDE1 again, it should work. andyw |
I got the same error.
Could you please elaborate this a litlle. You mean just run any game with Live enable ? or we have to hook into xbox live ?
Any instruction how to update my Dash version
Xbox 1.0
D: 1.00.4034.01
K: 1.00.4034.01
thank heaps!
Post by: XboxN00by21 on November 27, 2004, 12:20:00 AM