xboxscene.org forums

OG Xbox Forums => No-Modchip Hacks (exploits) => GameSave Exploits => Topic started by: JBNinja99 on March 09, 2004, 06:52:00 PM

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 06:52:00 PM

well it's pretty well know that exploits only work with the 4920 dashboard. and you need any kernel below 5530. you didn't really need to start this thread.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 06:58:00 PM

the gamesave exploit or acutally putting font and/or audio on?

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 06:59:00 PM

yeah gamesave exploits will work on any dashboard. but to install exploits (permanent font or audio) you need the 4920 dash.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 07:03:00 PM

well your kernel is 3944. since you got the gamesave working just ftp to your box and downgrade your dashboard from 5659 to 4920. you can find the 4920 dash from slayers cd.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 07:05:00 PM

basically putting font or audio on (permanent exploits) will allow you to ftp to your box w/ out loading up the gamesave. you could install PBL along with an exploit of your choosing.

Title: What Works?
Post by: NightElf on March 09, 2004, 07:07:00 PM

will s-pbl work with my dash

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 07:07:00 PM

once you get the dashboard all you do is ftp to your box. delete the entire contents of the C drive and replace it with the 4920 dash. mind you, DO NOT reboot during the process. if you reboot after you deleted your C you just made a paperweight. it's very easy to do though.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 07:25:00 PM

no no. when i said unplug my box, i meant actually take the power cord out. if you unplug your xbox (if you are running font) for too long, the xbox will boot to the clock set menu. your xbox detects that you are running exploited fonts and will go into a clock loop. you don't have to leave your box on 24/7, just plugged in.

Title: What Works?
Post by: NightElf on March 09, 2004, 07:31:00 PM

what ftp proggie cuteftp isnt working for meh i got ip and everthign right cause my rhouter auto detects ne stuff and assigns it and ip so i know that right heres the error  i get

CODE

STATUS:>   Connect: Tuesday 23:18:32 03-09-2004 STATUS:>   Connecting to 172.xx.x.xx STATUS:>   Connecting to 172.xxx.xxx.xxx (ip = xxx.xxx.xx.xxx) STATUS:>   Socket connected. Waiting for welcome message...    220 Please enter your login name now. STATUS:>   Connected. Authenticating... COMMAND:>   USER xbox    331 Password required for xbox. COMMAND:>   PASS ********    230 User xbox logged in , proceed. STATUS:>   Login successful COMMAND:>   TYPE I    200 Type set to IMAGE. COMMAND:>   REST 100    502 rest is not implemented. COMMAND:>   REST 0    502 rest is not implemented. STATUS:>   This site cannot resume broken downloads COMMAND:>   PWD    257 "/" is current directory COMMAND:>   TYPE A    200 Type set to ASCII. STATUS:>   Retrieving directory listing... COMMAND:>   PASV    502 pasv is not implemented. STATUS:>   Error opening data socket

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 07:33:00 PM

hmmm i don't know. i use flashfxp. i set the evox.ini to dhcp and my router assigns my box an ip. i've never had any problems connecting.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 08:01:00 PM

just make sure your evox.ini has static ip = no. then it should pick up an ip from your router. i don't remember if you can save and exit the evox.ini from the gamesave exploit. if not you may have to ftp w/ the gamesave exploit then navigate to the directory where it's stored and manually edit the evox.ini.

Title: What Works?
Post by: JBNinja99 on March 09, 2004, 08:14:00 PM

Title: What Works?
Post by: NightElf on March 10, 2004, 04:29:00 AM

ok got ftp working with flashfxp now uhh what next hmm i think i already got slayer's on a disc around here somewhere