Post by: SinisterDeath on February 15, 2004, 06:08:00 PM
Post by: g3ns on February 17, 2004, 10:33:00 AM
Post by: sleeper2002 on February 24, 2004, 06:29:00 AM
thanks in advance...
Post by: klz_fc on February 25, 2004, 10:42:00 AM
Post by: Konni on March 02, 2004, 07:09:00 AM
(Codebreaker is an "action-replay-like" but it don't require any hard-lock unlike the action replay.... see http://www.cmgsccc.c...thread.php?t=31 for more info)That's all, thanks people and see you ! (sorry for my english, hope you'll understand what i've wrote
)
Post by: vintage_guitar on March 15, 2004, 10:39:00 PM
| QUOTE (SinisterDeath @ Feb 15 2004, 09:32 PM) |
| Ok I know on the first part I seen something about certian memory cards... I bought an action replay to try the saved game and I can not get it to work with this flimzy little memory card that it provided... I was wondering if you think it might help if I pick up a MS Memory card? |
use MS brand, action replay ones are flawed.
Post by: vintage_guitar on March 15, 2004, 11:05:00 PM
Post by: xb0xb0y on March 22, 2004, 06:42:00 AM
| QUOTE (vintage_guitar @ Mar 16 2004, 08:03 AM) | ||
use MS brand, action replay ones are flawed. |
Thanks for this GREAT Tutorial!!!
FYI, made my own Xbox to USB cable this week-end (using one of my controllers break away cable and a spare standard USB cable).
Used Xtcrl drivers to get Action Replay to recognize the xbox controller. And was about to go out and buy an xbox memory card.
But then I hooked up the xbox/usb cable up to a USB Compact Flash reader I have (Accomdata brand that I got from Staples for $2-3 on sale). Used that and managed to Xbox format both a 16meg and 256meg CF card. Used USBIO (you can also use a freeware program called USB View) and configured the reader as an Action Replay!!!
Using my makeshift xbox memory card, I used Morden's Audio Exploit (Splinter Cell with MechAssault code), plus updating my dash to 4290 (that stumped me for quite a while), and have set up my Xbox with XBMP and have played DivX, XviD and mp3s of SMB shares on my win2k PC!!!
Now if only I can figure out why my Video playback freezes in XBMP and I have to reboot to finish watching movies!!!
Post by: foxygrandpa117 on March 25, 2004, 04:47:00 PM
Post by: careakith on March 30, 2004, 09:04:00 AM
When I try to drop it in it says its not a valid xbox save.
This post has been edited by careakith: Mar 30 2004, 05:14 PM
Post by: galladel on March 30, 2004, 09:05:00 PM
1. Get usbview.exe google it it's easy to find.
2. Attach your controler and install it(you should have no problem here)
3. Attach your cheap-o-memory card(this is where the trouble starts)
at this point you deviate from the standard tutorial if your cheap-o-memory card is not supported.
4. Once the "found new device" warning pops up open up usbview.exe do not install drivers!
5. You should find an unnamed "device" connected right with your xbox controler select this pane and look for "idVendor" and "idProduct".
6. Go to where you installed Action replay and inside the folder "drivers" open up the file "xbreader.inf" with notepad or txtpad in there find the sectiong that has this:
[_Devices]
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
Take note of "VID"=idVendor "PID"=idProduct!
wow how simple was that?
7.copy the last line and paste it on the next empty line so it should look like this
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
8. Replace the lines info with what USBview gives you for instance my 14.00 cheap-o-memory card info was this:
idVendor 044F
idProduct 0F0C
so the last line should look like
%S_DeviceDesc1%=_Install1, USB\VID_044F&PID_0F0C
so now your segment should look like this
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
%S_DeviceDesc1%=_Install1, USB\VID_044F&PID_0F0C
9. Save the file and try to make windows search for the driver again!
10. Use your 10.00 to 15.00 saved to buy a copy of 007:AUF!
Post by: tomlad on April 11, 2004, 11:58:00 AM
I understand everything about how the 007 hack works
I have...
007:AUF
Ms Memory Card
Ms Controller
Ethernet Crossover cable
USB cable i used for my old digital camera, has a USB>Square end
all the required files on my pc including:
007 save hack files
Evox files
xctrl driver ini file
Action reply drivers and software
So i think im set
I snipped the end off my xbox controller extention
Plugged my xbox controller into there with memory card out of it
stripped and seperated the coloured wires inside the extention end
Snipped the square end off my usb cable leaving the USB end still on
Stripped and seperated the colours wires inside it
Matched up the colours on the USB and the controller extention and twisted them together.
Red = Red
White = White
Black = Black
Green = Green
Yellow = Snipped
Silver coating snipped off as it complicates things.
Right so now i have an XBOX controller with a USB end.
Xbox controller > Inline Release >CUT **Twisted copper wires** > CUT USBmale > Computer
I plug into the PC xctrl at the ready and action reply software installed.
WINDOWS XP: "USB DEVICE FOUND"
WINDOWS XP: "Unknown Device"
(please not when tried on my friends computer windows xp pro: "The device was not recognised or there was a malfunction with this device"
So i think, right i'll need to tell it where the xctrl drivers are
(their in c:\windows\desktop\xctrl\xctrl.ini)
so i go to device manager
____________usb host devices
_______________unknown device
__________________properties
_____________________UPDATE DRIVER [button]
________________________Search for driver in....
_____________________________"../desktop\xctrl\"
NEXT
___"SEARCHING FOR DRIVERS"
...
____"Could not find drivers for unknown device"
so i try and specicially tell it specically where my driver is (ini file)
ITS IN F*CKING DESKTOP/XCTRL/XCTRL.INI
"This file does not contain driver information about your device"
Ok so lets try USBview
[Port1] USB MODEM
[Port2] DeviceFailedEnumeration: Unknown Device (this is where the wire is plugged in)
All values in port two are similar to 0000 or 0x000 or 0x00
WHYYYYYYYYYYYYYYYYYYYYY!!!!!!!!!
What am i doing wrong?
I have tried minicontroller HID drivers or wateva they are called and that still doesnt work. This has happened on 3 computers i have tried it on and ive tried a different USB wire incase it was that but it still doesnt work.
[email protected] > MSNM, Email
please reply when you can.
Tom
This post has been edited by tomlad: Apr 11 2004, 07:28 PM
Post by: natboy on April 11, 2004, 02:15:00 PM
Update: I just tried it with a 16 CF card I had lying around and it worked! Hoot!
This post has been edited by natboy: Apr 11 2004, 11:00 PM
Post by: xb0xb0y on April 14, 2004, 06:02:00 AM
Cable 1
a) xbox connection <-----> b) usb female
a) connected to Xbox
b) USB female memory card reader
Cable 2
c) usb male <-----> d) xbox breakaway
c) USB male to PC
d) Xbox Controller
Attach Cable 1 & 2 together via USB for use for Xbox and controller
Anyone can confirm the need for the yellow wire to indicate to the Xbox the controller is attached? I read that it was only to indicate what type of controller and wasn't needed, but it seems more than that in my case.
This post has been edited by xb0xb0y: Apr 14 2004, 01:14 PM
Post by: mike1000 on April 20, 2004, 07:15:00 PM
Tomlad, as well as I got an unrecognized device found, so anyone know? thanks
Post by: The_Truth on April 21, 2004, 05:18:00 PM
Post by: yosomono99 on April 22, 2004, 05:14:00 AM
I've got a crap load of those things laying around.
Post by: imovaherenow on May 03, 2004, 06:15:00 PM
________________
ImOvaHereNow.Com
Post by: grandmasterazz on May 06, 2004, 12:24:00 AM
having some problems with this
actually exactly the same as "tomlad" from page 17 in red text
i have xctrl drivers but my pc refuses to accept them
when using usbview i see it says this : DeviceFailedEnumeration
i have tested it on another pc of similar specifications yet the same thing happens
ive have checked and rechecked and checked some more that there are no shorts, i even reconnected up the cables to their original ends to test that they still work and they do
any help would be great
Post by: chaoscreator on May 11, 2004, 11:16:00 AM
Anyway, I was wondering... isn't the end of the breakaway cable that fits into the controller port of the XBox simply a beefed up USB connector? If you simply ripped off all that plastic shiot, shouldn't it work?
Post by: vintage_guitar on June 06, 2004, 05:38:00 AM
| QUOTE (chaoscreator @ May 11 2004, 02:16 PM) |
| Okay, I'd like to pose a question. Not sure if anyone's mentioned it in the 17 pages preceeding this... Read the first two or three pages and got bored. Anyway, I was wondering... isn't the end of the breakaway cable that fits into the controller port of the XBox simply a beefed up USB connector? If you simply ripped off all that plastic shiot, shouldn't it work? |
No, it's not.
Post by: -=Sanjuro=- on June 11, 2004, 12:20:00 PM
thanks guys
~Sanjuro
Post by: unregistered user on June 12, 2004, 05:07:00 PM
Anyways, has anyone tried to install the xbox remote on their computer? It says installing 'usb device', but I don't know what drivers I should use.
Post by: -=Sanjuro=- on June 12, 2004, 10:41:00 PM
Post by: DjALTeK on June 15, 2004, 07:46:00 PM
I jus spliced a usb connector from a wingman 3d joystick i had around and got the xctrl drivers and installed them. works great! jus 1 prob.... no mem card yet!! but ill get one within a week!. btw which is the better hack 2 use? MA or 007:AUF??
Post by: mc_365 on June 19, 2004, 10:47:00 AM
when using the madcatz memory card should I see it in "my computer" as a removable drive. Currently I cant see it but I can transfer game saves to it using
AR software.
by the way I splice a usb male into my breakaway cable so I can still use it with my xbox mod if that makes a difference
Post by: vintage_guitar on June 19, 2004, 09:56:00 PM
| QUOTE (mc_365 @ Jun 19 2004, 01:47 PM) |
| which drivers are better the Xctrl or XID or XBCD and when using the madcatz memory card should I see it in "my computer" as a removable drive. Currently I cant see it but I can transfer game saves to it using AR software. by the way I splice a usb male into my breakaway cable so I can still use it with my xbox mod if that makes a difference |
No you shouldn't see it in My computer. And also.. i prefer XCTRL..but since it's illegal..
Post by: mc_365 on June 20, 2004, 05:14:00 PM
Post by: gamerguy999 on June 25, 2004, 04:16:00 PM
Post by: enuf on June 26, 2004, 09:04:00 PM
What a coincidence!
If someone finds something.. please let us know.
I have a post about this here.
Edit: Click the link for the answer (kinda).
Post by: elcapitano on June 28, 2004, 01:18:00 PM
I have problems when extracting the enigmah video selector to my pc. Is it meant to extract fully on a pc? if not does it stay as a rar?
when i try to transfer the gamesave, with the rar inside, it will not accept it in action replay!
if this is a bad copy of enigmah could u please point me in the right direction for a good one please?
thanx
Post by: ippo on June 29, 2004, 06:36:00 PM
Post by: elcapitano on June 30, 2004, 12:18:00 PM
BTW: i am doing this exploit for one reason only......HDTV!!
please can anyone help?
thanx
Post by: ippo on July 01, 2004, 07:10:00 AM
Post by: Gareth2061 on July 03, 2004, 01:46:00 AM
Im currently using Xctrl for prince of persia and im using the left thumbstick to move around. It works great but the only probelm is that when you try and move the thumbstick diagonaly, it causes the character to walk very slowly instead of running which gets very frustrating. I dont know if this is down to the game or Xctrl. Has anyone else had this problem in a game and would those other drivers fix the problem?
Post by: tbirdguy on July 30, 2004, 11:35:00 PM
they do not work
Post by: greggthegrimreaper on August 05, 2004, 09:29:00 PM
I got to try it with an interact memory unit though because i do not have an offical m$ memory unit 
Post by: Fafhrd on August 14, 2004, 09:50:00 PM
Works great now!
(I used a M$ memory card and controller and win98SE.)
Post by: spacemaster on September 04, 2004, 10:32:00 PM
Can you point me to a link for AR version for PAL. I currently have v.13 but I suspect my memory does not work with 1.3.
thank heaps
Post by: Raistlin(420) on September 22, 2004, 12:32:00 AM
As i said before Fantastic tute there Vintage fixed the error by finding the "REAL" save that had already been prepared for AR i now have it on my memory card and am about to go and scare the shit out of my friends and please a lot of kids thx again man i'll update when i have completed my first Xbox soft mod w00h00
Post by: vintage_guitar on September 24, 2004, 12:00:00 AM
Post by: steelerB on October 02, 2004, 08:18:00 PM
followed instructions from the 1st post exactly and added the line below to my xbreader.inf file after I installed action replay but before I tried to install the mem card. Works like a champ xfering files to my xbox and from it...
[_Devices]
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_1316 <-------added this line
Hope this may help someone having probs
peace out
steelerB
Post by: Pureagg on October 03, 2004, 01:07:00 PM
Post by: Yankee Ruin X on October 04, 2004, 06:42:00 PM
Post by: Yankee Ruin X on October 05, 2004, 02:23:00 PM
Post by: poketaces on October 05, 2004, 08:08:00 PM
Post by: poketaces on October 05, 2004, 08:10:00 PM
w00t
Post by: poketaces on October 06, 2004, 10:23:00 PM
Post by: poketaces on October 06, 2004, 11:20:00 PM
i figured out that u go to control panel add hardware and look under usb device and it installs the thing and works in action replay now the only other problem i have is i cant donwload xctrl and i cant figure out hwo to add new saves and stuff
Post by: sailingoncheese on October 07, 2004, 10:14:00 PM
I'm having the same problem as yankee, Its telling me that the .zip splinter cell file isnt a valid xbox save file. Why?
thanks
-brian
Post by: sycodelic on October 09, 2004, 01:47:00 PM
Post by: M@DM@N on October 13, 2004, 11:51:00 AM
Post by: forthex on October 13, 2004, 07:04:00 PM
| QUOTE (sycodelic @ Oct 9 2004, 03:50 PM) |
| hi i also am having probs with my gamster memory controller installing drivers pls could some1 help cheers |
do not use knock-off xbox memory cards. use M$ memory cards (even though i hate to say it) they are better! There is no data courruption like in the knock-offs.
Post by: jNizzle on October 16, 2004, 08:07:00 PM
Here is the pic:
Please any help would be nice.
Post by: jcupp114 on October 21, 2004, 07:29:00 AM
Now, I could use some help with this. I have a lot of usb flash drives that when inserted to the xbox, via the modded cabling will format and become an awesome memory card. Now when plugged into the usb of the pc I get nothing. I have tryed the megaxkey software yet NO JOY yet. I am searching for a remedy for this just no luck as of now. If someone can help. That would be awesome!
The drive is a AD pintech usb 64 meg flash drive. If more info is needed. I will try to gather it. Thank you for your time
Take care
Jcupp114
Post by: patto on October 21, 2004, 10:23:00 AM
anyways i am asking about the flash drives... my theory suggests that if the drive is recognized in windows without specialist drivers it should be find on the xbox. so is that correct at all?
i've only tested one drive and it worked so i'm not sure
Post by: patto on October 22, 2004, 12:51:00 PM
once you get it working all you need is the appropriate ltools package and game
Post by: punkerspaz on October 22, 2004, 04:11:00 PM
Post by: punkerspaz on October 24, 2004, 10:54:00 AM
Post by: HawkKain on November 23, 2004, 03:39:00 PM
Post by: s0ftm0d on November 23, 2004, 08:32:00 PM
Post by: cragster on December 13, 2004, 06:49:00 PM
Post by: cragster on December 13, 2004, 07:29:00 PM
Post by: vintage_guitar on December 22, 2004, 05:30:00 PM
This post has been edited by vintage_guitar: Dec 23 2004, 01:31 AM
Post by: cragster on December 24, 2004, 06:53:00 PM
Post by: Bauman58 on February 20, 2005, 10:35:00 PM
i hope you can help, i payed $30 for this thing and i just want it to work
Post by: Apprentice modder on March 07, 2005, 05:30:00 PM
QUOTE(vintage_guitar @ Jul 20 2003, 09:54 PM)
umm. i just tore apart an OLD USB mouse so im guessing USB1
as for the pictures..i have found a few(i dont have a digital camera or scanner)
just cut the xbox controller cord,and the USB controller cord and connect the collor coded wires to the matching color(it's quite easy) and snip the yellow one
this is the closest thig to a pic i've seen
http://www.llamma.com/xbox/Mods/creating_a...usb_adapter.htm
as for the pictures..i have found a few(i dont have a digital camera or scanner)
just cut the xbox controller cord,and the USB controller cord and connect the collor coded wires to the matching color(it's quite easy) and snip the yellow one
this is the closest thig to a pic i've seen
http://www.llamma.com/xbox/Mods/creating_a...usb_adapter.htm
I've found a better one... Usb controller
Post by: bench2004 on March 07, 2005, 09:05:00 PM
Just wonder if anyone can help.I find this tut. and it sound great, install AR's sw and edit the ini and it can read my Xbox formated USB thumb drive (the xbox can format and transfer save game to this thumb drive). But after I transfer save game from AR to the thumb drive, the thumb drive doesn't work anymore on the xbox. The xbox seems to blink and have very slow respone. I have try diff. thumb drive (SAN Disk Crus and HP) with similar result. Has anyone any idea ? The AR sw is the current one on codejunkies site.
Thanks
:jester:
Post by: marky-b on March 08, 2005, 06:56:00 PM
whenever i try to install either of the two action replay softwares, i get an error stating that "c:\\WINDOWS\SYSTEM32\AUTOEXEC.NT. The system file is not suitable for running MS-DOS and MS Windows applications. Choose 'Close' to terminate the application."
and it gives me two options: close and ignore. i've tried both, but neither do a thing. the installer just exits.
i've tried restarting and junk, but nothin seems to work. is this a prob in my windows or the software? what can i do to fix it?
thanks!
-marky
Post by: jojo_nl on March 09, 2005, 09:09:00 AM
QUOTE(marky-b @ Mar 9 2005, 03:02 AM)
hey guys. seems i have a problem :(
whenever i try to install either of the two action replay softwares, i get an error stating that "c:\\WINDOWS\SYSTEM32\AUTOEXEC.NT. The system file is not suitable for running MS-DOS and MS Windows applications. Choose 'Close' to terminate the application."
and it gives me two options: close and ignore. i've tried both, but neither do a thing. the installer just exits.
i've tried restarting and junk, but nothin seems to work. is this a prob in my windows or the software? what can i do to fix it?
thanks!
-marky
whenever i try to install either of the two action replay softwares, i get an error stating that "c:\\WINDOWS\SYSTEM32\AUTOEXEC.NT. The system file is not suitable for running MS-DOS and MS Windows applications. Choose 'Close' to terminate the application."
and it gives me two options: close and ignore. i've tried both, but neither do a thing. the installer just exits.
i've tried restarting and junk, but nothin seems to work. is this a prob in my windows or the software? what can i do to fix it?
thanks!
-marky
Its windows related. Can be fixed. Google first topic : MS support
Post by: jojo_nl on March 09, 2005, 09:42:00 AM
I tried this Action Replay thingy on a STMP3500 MP3 player and it works.
So this should work for all the same devices which uses this chip.
- Marquant MP3 speler MP3-117 256MB
- Hp audiokey 32-256MB
- Sweex MP3 player pacific/mediteranian 128MB
- Creative Muvo TX 128-256MB
etc.
U need to add the corresponding PID in the driver xbreader.inf file
%S_DeviceDesc1%=_Install1, USB\VID_066F&PID_8000
And for the savegames to work in AR you need to change a few things in the savegame. There is a file in the save of the game itself called datelinfo.xbx and there is a databasefile for the AR program to know what is in the directory.
One easy solution is :
Find in the database the file splintercell or whatever gamesave. Open it with ZIP prog. U see a UDATA dir in it > delete it .
Now open the savegame of the exploit and copy the dir UDATA to this empty zip-file u just had opened.
Close it and run the AR prog and copy the savegame u used to the memory-device.
U need the exact same one as u emptied in the first place.
Dont worry about the text doesnt seem right or anything else, once u done u see the right savegame in your memory-device.
Any other files like txt are no problem i believe.
Another thing: the driver stops responding after 20 minutes or less. re-plug the device if you dont see it connected anymore.
Can anyone tell me if there is a way to use a USB<>USB interconnect ?
So u can have a USB network with pc.
I also like to know wheter i can use my Bluetooth as a wireless device for the XBOX
I didn't come to the point of using the exploits since i dont have the original games.
But i will manage to get my 1.6b xbox from 2-6-2004 to work, even if i have to replace chips and all. :rolleyes:
This post has been edited by jojo_nl: Mar 9 2005, 05:48 PM
Post by: jojo_nl on March 09, 2005, 07:39:00 PM
So i used the mp3 player to transfer the savegame, put the game in
the dvd-drive and turned off the XBOX. Turned on > game starts wait...
load the saved game and there it was : the softmod v2 auto-installer
unlike the manual says u need to press A twice and start the saved
game/linux installer. I pressed buttons from up to down ( backup and stuff)
and while i was adjusting some settings it accidently rebooted.. i waited and
voila evox booted. After some tests with video and stuff and doing weird stuff
to it like put a copied game in and turn on the xbox and backup all, run some
progs like emulators and xboxtools, unplugged powercord while it was in evox
and while copying a game (shouldn't do that
) . It works great on my xbox 1.6b
Post by: StepsAscend on March 10, 2005, 01:54:00 AM
Post by: Gamer64QRM on June 07, 2005, 09:38:00 PM
Post by: vintage_guitar on June 08, 2005, 05:26:00 PM
This post has been edited by vintage_guitar: Jun 9 2005, 12:27 AM
Post by: basso4735 on June 10, 2005, 10:52:00 PM
Post by: vintage_guitar on June 11, 2005, 06:29:00 PM
Post by: Jaxter on June 20, 2005, 07:56:00 AM
I opened my xbox controller socket, and soldered a female connector onto it, so i could plug a USB stick in for use as a memory card. However i found out that 1.6 xbox's (The newest ones) don't allow you to use these as memory cards anymore. I then unsoldered the female and replaced it with the male. Looking at the connectors you can see RED BLACK YELLOW and GREEN, so naturally i thought RED-RED, BLACK-BLACK, GREEN-GREEN, YELLOW-WHITE (As i knew yellow wasnt used by USB) However when i plugged this into the computer to use it as a control pad using XBCD it didnt work, and when trying to edit the .inf and reinstall i got the error "The device is not supported by........". I saw that some of you had seen this error and thought i'd tell you what it is.
Although the wires inside the cable may be the same colour, it doesn't mean that they are the same data transfer wires. (Mine should've been YELLOW-GREEN, GREEN-WHITE). So if anyone else is trying to use a crappy extension cable they got with their MP3 player, this is how the wires should be soldered.
Post by: tx81 on August 22, 2005, 02:36:00 AM
Post by: JimmySprinkle on October 06, 2005, 03:19:00 PM
second, i dont know if this has been has already been cleared up, but:
i wanted to make an action replay, so i spliced an xbox break away cable with a USB connecter (works) and downloaded the AR software (works), i also downloaded the drivers for the controller (works).
however, when i reboot and insert my Arsenal 8MB memory card, it says found new hardware, plese select driver. i direct it to where i insalled AR, and when i open the drivers folder, there is nothing in there, and i cant access my card.
Can anyone tell me how to fix this, or where i can download the software(i know its free) but i need one which has the driver there.
Post by: robbyrob on November 13, 2005, 02:58:00 PM
I even tried to go straight in thur device manager and update the drivers but it says the drivers wont work???
anyone have this happen to them yet?
RR
Post by: robbyrob on November 13, 2005, 04:04:00 PM
I know u might be asking why not just leave the save on the HD? well i have 2 boxes i need to mod. One is already moded but one i need to go softmod..
Rob
Post by: robbyrob on November 15, 2005, 12:31:00 PM
The memory card is drive H: once you have FTP'd in..
Doh!!!!!
my next question might be a dumb one too but how do i transfer from Memory card to actual hdd?
rob
Post by: mane0129 on January 19, 2006, 04:26:00 PM
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USBVID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USBVID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USBVID_0E4C&PID_044B <----Gamster
But my computer doesnt recognize it. When i try to drag something to the memory card on action replay, it doesnt take it..it doesnt even allow me to place anythin in there.. what am i doing wrong is there somwthing else i have to change?
Post by: mane0129 on January 19, 2006, 05:47:00 PM
Post by: Xeythe on January 23, 2006, 03:50:00 PM
Help.
Post by: acestu on October 25, 2006, 02:54:00 AM
QUOTE(galladel @ Mar 31 2004, 04:36 AM) 
Hmmm is anyone still reading this? Anyways, i wanted to add my little bit here. The reason you want to "make your own" is really to save a few bucks right? Why spend 29.99 on a MS memory card when you can buy a cheapo no name thrustmaster memory card for 14.00 i hear some places you can buy ms memory cards for 25.00 bucks but even still being able to use a cheap o memory card should save you at least 10 bucks so here are the steps to get said "cheap-o-memory card"to work with Action replay drivers.
1. Get usbview.exe google it it's easy to find.
2. Attach your controler and install it(you should have no problem here)
3. Attach your cheap-o-memory card(this is where the trouble starts)
at this point you deviate from the standard tutorial if your cheap-o-memory card is not supported.
4. Once the "found new device" warning pops up open up usbview.exe do not install drivers!
5. You should find an unnamed "device" connected right with your xbox controler select this pane and look for "idVendor" and "idProduct".
6. Go to where you installed Action replay and inside the folder "drivers" open up the file "xbreader.inf" with notepad or txtpad in there find the sectiong that has this:
[_Devices]
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
Take note of "VID"=idVendor "PID"=idProduct!
wow how simple was that?
7.copy the last line and paste it on the next empty line so it should look like this
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
8. Replace the lines info with what USBview gives you for instance my 14.00 cheap-o-memory card info was this:
idVendor 044F
idProduct 0F0C
so the last line should look like
%S_DeviceDesc1%=_Install1, USB\VID_044F&PID_0F0C
so now your segment should look like this
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USB\VID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USB\VID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USB\VID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USB\VID_040B&PID_6520
%S_DeviceDesc1%=_Install1, USB\VID_044F&PID_0F0C
9. Save the file and try to make windows search for the driver again!
10. Use your 10.00 to 15.00 saved to buy a copy of 007:AUF!
Well I'm not doing it to save money, i am just determined to get the damn thing working, I have done exactly as you have done then updated the driver and still when i try to drag and drop the LINUX file onto the memory card from PC the Action Replay Software crashes, if you manage to get anywhere with this I would be grateful if you would let me know P.S. My Memory card is a cheap and nasty chinese thing, i would go and buy a genuine one but knowbody sells them round here....
cheers
Acestu
Post by: complexicated on January 22, 2007, 12:24:00 PM
Like this one....?
Post by: john7435 on May 09, 2007, 03:54:00 PM
does it matter if it did this without the drivers? will the action replay thing still work?
Post by: JeepRubi on May 29, 2007, 06:21:00 PM
Post by: loizzo on August 29, 2007, 05:45:00 PM
i plugged my drive into xbox formatted it got the numbers from usb view and changed the notepad document but when i go to update the drivers i cannot choose maxdrive xbox or action replay does anybody know why?
Post by: Jorellini on August 30, 2007, 12:26:00 AM
has any1 been sucessful in connecting a usb thumbdrive to the xbox n using it as a memory card
i am currently using my modded dvd ir connector xbox remote and then attatching a female to female usb cord.
i have tried a few usb thumbdrives and the xbox doesn't pick any of them up
are there any specific ones to use
i have seen a compatibility list and they say a psp with its original 32mb works which i have tried but it didnt pick it up
if sum1 has gotten this to work what usb did u use
or does sum1 know of a converter to make them fatx
many thnx
Post by: niteshgaba on August 04, 2010, 10:47:00 AM
Any Idea...
Post by: steveo1978 on August 04, 2010, 04:19:00 PM
Post by: niteshgaba on August 04, 2010, 11:25:00 PM
QUOTE(steveo1978 @ Aug 5 2010, 03:49 AM)
Most likely what you have tried is not compatible. I have had the same problem.
Thanks for the reply. I have tried Kingston Data Traveller 1 GB, Iball 256MB.
Any suggestion what should i do. i need to softmod my xbox.
Post by: steveo1978 on August 04, 2010, 11:55:00 PM
Post by: niteshgaba on August 05, 2010, 01:43:00 AM
QUOTE(steveo1978 @ Aug 5 2010, 11:25 AM)
You could always do the hot swap method. I have a few memory cards here. Where are you located?
In India dear...
Post by: steveo1978 on August 05, 2010, 01:51:00 AM
Post by: niteshgaba on August 05, 2010, 01:56:00 AM
QUOTE(steveo1978 @ Aug 5 2010, 01:21 PM)
oooh ok. so yeah you might wanna read up on doing the hotswap.
Yes, i read about that also but dont have a PC. I only have a Laptop and my friends have PC with Sata Interface. I created the cable first of my own and it did the same thing Screen blicking and then got it from play-asia.com. and ended again to ZERO..
Is there any one who can help me india.
Post by: steveo1978 on August 05, 2010, 02:31:00 AM
Post by: niteshgaba on August 05, 2010, 02:48:00 AM
QUOTE(steveo1978 @ Aug 5 2010, 02:01 PM)
If you have a memory card and just no action replay there is a way to mod a controller and make it work on the pc. So then you could put the softmod files on the memory card and softmod that way
No i donot have any memory card which works on XBOX.
Post by: ldotsfan on August 05, 2010, 07:50:00 AM
Do you have a USB/IDE enclosure? You could hotswap with that too. http://forums.xbox-s...&...t&p=4714351
Post by: ldotsfan on August 06, 2010, 07:58:00 PM
QUOTE(niteshgaba @ Aug 7 2010, 12:09 AM)
Thanks for pointing me out.. I got it:)
The only problem is i cannt see the full screen. The letter are going out of TV set. I have installed Unleash. Any IDea
Try changing the unleashX skin. What AV cables are you using? Is this a PAL or NTSC console? Are you using a HDTV?
Post by: niteshgaba on August 06, 2010, 08:40:00 PM
QUOTE(steveo1978 @ Aug 7 2010, 07:50 AM)
There is a setting in Unleashx to adjust the screen size. I dont have unleash right know so I cant say exactly what it is but it will let you adjust it using the right and left thumb sticks.
Try changing the unleashX skin. What AV cables are you using? Is this a PAL or NTSC console? Are you using a HDTV?
OK.Will try to change the skin. I am using the AV cables which comes withXBOX. Its an NTSC Console. Mine TV is HD Ready which supports only 480i.
Which dashboard you guys suggest?
I may be stupid to ask this question. But if you can answer.
Diff between Softmod Installer Deluxe and Auto Installer Deluxe
What i need to do if i need to put a new HDD. My Xbox is not Mod Chipped.
Post by: ldotsfan on August 07, 2010, 03:38:00 AM
QUOTE(niteshgaba @ Aug 7 2010, 10:40 AM)
Which dashboard you guys suggest?
XBMC is my personal preference.
QUOTE(niteshgaba @ Aug 7 2010, 10:40 AM)
Diff between Softmod Installer Deluxe and Auto Installer Deluxe
One is a softmod , the other an installer disc.
QUOTE(niteshgaba @ Aug 7 2010, 10:40 AM)
What i need to do if i need to put a new HDD. My Xbox is not Mod Chipped.
Read my sig.
Post by: Heimdall on December 30, 2010, 03:53:00 AM
Use Xplorer360 beta 6 instead of AR.
Post by: Heimdall on December 30, 2010, 04:19:00 AM
Post by: jaybeebrad on December 30, 2010, 04:37:00 AM
QUOTE(jaybeebrad @ Dec 30 2010, 06:26 AM)
Ok, well now I'm freaking out. After I copied the file in question over I realized I also had a hack game save for Splinter Cell labeled as "NTSC", so I put that one on the flash drive and copied it onto the XBOX. And now my XBOX won't play any game. I've put in two (Splinter Cell and Mechwarrior) and both are giving me an error "Your Xbox can't recognize this disc. Make sure it's an Xbox gamne, DVD movie or audio CD. Also check to see if the disc is dirty or damaged. Remove the disc to continue."
What happened? How do I fix this?!?
Just tried a music CD, same thing!!!
I can't believe this is happening. I came here for help and now something has gone horribly wrong, and I'm sitting here like an idiot crying over a non working xbox and you logged off. It's like, I know you don't owe me anything, but I don't know where to turn or what to do! This is horrible...
*edit - really, I'm just so distressed that someone would log on, give a quick tip without any real explanation, and then disappear. I've been working on trying to mod this thing for a week, and you come along and tell me to do something new, and I do it, and now my entire system appears to be completely broken. I just feel so defeated. It's 6AM, I have to make an attempt to forget this is happening and go to bed. I know I'm being a drama queen, but this is the worst feeling EVER.
Post by: Heimdall on December 30, 2010, 11:57:00 AM
1. Your DVD drive is flaky. It has nothing to do with the softmod you've tried - mods don't affect the ability of the DVD drive to read genuine Xbox discs. Try cleaning the lens. If that doesn't work, you can temporarily swap one from another Xbox.
2. You need to get rid of all Splinter Cell gamesaves from the Xbox, and start again with the Krayzie gamesaves, not the old SID 2 saves you've been trying to use. Copy the numbered folders to the root of the memory card (see previous post). When you plug the memory card into the Xbox there will be two saves - one called Splinter Cell (7 blocks) and one called Linux Installer (375 blocks), and you have to copy both to your hard drive.
3. You need to relax, and maybe get someone to help you. It doesn't take a week to mod an Xbox with a gamesave, it takes 10 minutes, and maybe someone else there to make sure you aren't misunderstanding the instructions might be a good idea, and might stop you from becoming so emotionally involved.
Just for completeness, you should check your dashboard version before you start to softmod, and if it isn't 5960 then there's an extra step - you need to update the dash before you start. Any post 2004 live-enabled game after Halo 2 will work (Halo 2 and Doom 3 definitely work because I've used them both, and Pro Evolution Soccer 4, Need For Speed Most Wanted, and Goldeneye Rogue Agent should also work). Just load the game and start to log in to live. You don't need a network connection, you just go through the motions of starting to log in to live, and the first thing the game does is update the dashboard to the latest version. Once the update is done you can quit the game, then start Splinter Cell and do the softmod.
Post by: vintage_guitar on July 19, 2003, 04:45:00 AM
This method will allow you to use a regular memory unit as an action replay (get and put saves from the internet to the xbox) without buying a mega-x key or action replay but rather, a standard xbox memory unit (xbox brand,but read on later in this thread if you want too try some other brand..there are ways too do this..but i have not tried them so of course..i will not include them in my tutorial) and a standard xbox controller. Also, it will let you use your controller on your computer like a usable gamepad..on most emulators and games with controller support, and also, just by making a few modifications, you can use a keyboard and mouse on your xbox.
You'll need,
1.Xbox memory unit(THIS TUTORIAL NO LONGER SUPPORTS A NON MS BRAND MEMORY CARD, DUE TO TOO MANY CONFLICTS IN SAVE CORRUPTION..ETC.)
2.Access from your xbox controller to your PC (xbox controller to usb cable, or homebrew cutting the cord and connecting the wires technique, EXPLAINED LATER IN THIS THREAD!!!!)
Here are the steps.
1. Get the action replay software LINK 1 is 1.20(Seen problems, reccomended use of 1.05), LINK 2 is 1.05.
1.http://us.codejunkies.com/downloads/Action...box_1_20_US.exe
2.http://us.codejunkies.com/downloads/Action...nglish1_05).exe
2. Download the HID drivers.(XCtrl is now illegal and will NOT be used in this tutorial)
http://image.lik-sang.com/content/xid/xid.zip
3. Plug the controller into the PC.(Make sure the memory card is NOT plugged in!!) It will say found new hardware. and direct it to where you installed the HID drivers on your computer. Reboot
4.Plug the memory unit into the controller. It will say found new hardware. Direct it to where you installed the action replay software in the Driver folder. (or if you didnt change it, C:/Program Files/Datel/Action Replay Xbox/Driver
Reboot
5. Double-click on ActionReplayXbox.exe in the action replay folder, and voila, you now own an action replay, cool eh, but you didnt waste like 40 bucks.
--Homebrew Xbox Controller To PC Method--
PICS AT BOTTOM
You'll need
1.a usb cord(or cut an old mouse or something and salvage the cord from it,BUT MAKE SURE ITS USB!!)
2.An xbox controller, duh
Here's the steps
1.Find a good place at the end of the xbox cord(i did it by where it plugs into the second part of the controller cord) carefully, strip all the wires (about a dimes length)
2.Cut the usb cord and strip all the wires(about a dimes length)
3.Match up wires and twist them together or solder them. except the yellow wire on the xbox controller cord. which you don't need, just snip it off
4.Either tape them together which electrical tape them, or you can tidy it up a little bit and solder them. it still works out fine either way.
PICS
*all work on this site is work of original author*
http://www.llamma.com/xbox/Mods/creating_a...usb_adapter.htm
This post has been edited by vintage_guitar: Jun 20 2004, 05:51 AM
Post by: caustic on July 19, 2003, 05:05:00 AM
Then once ive done that how to i copy it from the memory card to the hdd?
Thanks, good tutorial.
Post by: vintage_guitar on July 19, 2003, 05:08:00 AM
This post has been edited by vintage_guitar: Jul 19 2003, 12:10 PM
Post by: caustic on July 19, 2003, 04:33:00 AM
Post by: caustic on July 19, 2003, 05:29:00 AM
Post by: vintage_guitar on July 19, 2003, 05:38:00 AM
Post by: xjet on July 19, 2003, 02:37:00 PM
Mad Catz Memory Card Usb Mod
This will work on any memory card I just used a Mad Catz Because it was cheap.
(I found one at Game Stop for $8.99 used)
Post by: xjet on July 19, 2003, 03:24:00 PM
Post by: vintage_guitar on July 19, 2003, 08:54:00 PM
Post by: mplsldp on July 19, 2003, 09:10:00 PM
another question: why would you need the AR software? can't you simply copy+paste the 007/MA zip to the memory stick?
thanks for any replies.
Post by: vintage_guitar on July 19, 2003, 11:19:00 PM
Post by: Ridley on July 20, 2003, 02:06:00 AM
This will save me some money.
Post by: lostsushi on July 20, 2003, 01:38:00 AM
So something like...
Controller -> connector to breakaway -> breakaway cable (cut here) -> wire up to a USB cable
Thanks!
Post by: jackslap on July 20, 2003, 05:22:00 AM
This post has been edited by jackslap: Jul 20 2003, 12:23 PM
Post by: vintage_guitar on July 20, 2003, 06:33:00 AM
This post has been edited by vintage_guitar: Jul 20 2003, 01:33 PM
Post by: mplsldp on July 20, 2003, 09:15:00 AM
is the format an issue? i think the adaptor i have right now is FAT.
Post by: Anders. on July 20, 2003, 12:23:00 PM
Or do you know any other source that have pictures of that kind of mod?
(My engish isnt so good so I would understand better how to perform the modification with some pictures to guide me)
Edit: Another question came up.
Does it matter wat kind of USB cord I use? My localhardware store sell both USB1 and USB2, what is the diference betwen these?
This post has been edited by Anders.: Jul 20 2003, 07:28 PM
Post by: vintage_guitar on July 20, 2003, 03:48:00 PM
as for the pictures..i have found a few(i dont have a digital camera or scanner)
just cut the xbox controller cord,and the USB controller cord and connect the collor coded wires to the matching color(it's quite easy) and snip the yellow one
this is the closest thig to a pic i've seen
http://www.llamma.co...usb_adapter.htm
Post by: lostsushi on July 21, 2003, 12:45:00 AM
Post by: Social-Zero on July 21, 2003, 03:03:00 AM
Post by: Social-Zero on July 21, 2003, 03:05:00 AM
Post by: vintage_guitar on July 21, 2003, 04:05:00 AM
Post by: bodman2 on July 21, 2003, 04:05:00 AM
then it says the (specified location does not contain information about your hardware)
did i get the correct action replay software this is the file name:
ActionReplayforXbox(USEnglish1_05).exe
got it from www.codejunkies.com/
and my memory card is a ( interact flash memory 8mb )
any help thanx
This post has been edited by bodman2: Jul 21 2003, 01:56 PM
Post by: Social-Zero on July 21, 2003, 07:36:00 AM
Post by: vintage_guitar on July 21, 2003, 02:19:00 PM
Post by: bodman2 on July 22, 2003, 03:57:00 AM
i have a interact flash memory 8mb. this action replay driver doesnt seem to work for my mem card,i direct the install to the correct location just keeps saying:
(specified location does not contain information about your hardware)
it must only work on offical mem cards?
Post by: vintage_guitar on July 22, 2003, 04:09:00 AM
Post by: bodman2 on July 22, 2003, 04:19:00 AM
Post by: katananja on July 22, 2003, 08:00:00 AM
Post by: oracle2 on July 22, 2003, 11:26:00 AM
Thanks...this works great. One more question for you, though. Is there any way to access my memory card as a drive letter through Windows? That would be sweet...
*edit* Doh...I'm looking at an actual AR save and it's just the zipped directory structure. Nevermind. ;)
This post has been edited by oracle2: Jul 22 2003, 06:40 PM
Post by: katananja on July 22, 2003, 04:27:00 PM
HERE!
Post by: kahn2k on July 22, 2003, 04:36:00 PM
| QUOTE (katananja @ Jul 23 2003, 01:27 AM) |
| I've done mine HERE! |
Cool! I was thinking of doing the same thing so that I can still use the controller on the xbox.
Just one question, have you tried using a gender changer on the usb end and connecting a usb memory pen to it and letting xbox recognise it?
Post by: katananja on July 22, 2003, 05:57:00 PM
| QUOTE |
| Just one question, have you tried using a gender changer on the usb end and connecting a usb memory pen to it and letting xbox recognise it? |
I dont know, some say that this can be done, xbox memory card and USB key holders with 128MB are the same. Put your memory stick adapter in the other end, and format de device in xbox.
Simple as that.
But, i dont have any to test it right now
Post by: vintage_guitar on July 22, 2003, 06:20:00 PM
Post by: XBLamer on July 22, 2003, 07:00:00 PM
By the way glad I didn't blow $40 on the action replay kit the site has been down for the past 5 days.
Post by: katananja on July 22, 2003, 07:01:00 PM
It works!!!!!!! It works!!!!!I've called my friend over to test his ImageMate SanDisk 6 in 1 with xbox and Works!!.
We test it with 64MB SM, damn!!
Xbox will format the device and BANG! Got ya!
Uhhhhhhh MAMA!!!
Ok, Ok!! I'm Cool, I'm Cool!!
Doc From, Back To The Future:
"It works!!!!!!!, It works!!!!!!!"
Post by: XBLamer on July 22, 2003, 07:19:00 PM
By the way I think someone should down load the version of action replay and stick on xbins cause I think the manufacturer will pull the code when this gets around.
Post by: bodman2 on July 24, 2003, 04:28:00 AM
Post by: Xboxman20 on July 24, 2003, 10:33:00 AM
Post by: Xboxman20 on July 24, 2003, 10:50:00 AM
THen there is this extra wire with not cover on it? ist hat the ground?
Post by: Xboxman20 on July 24, 2003, 11:18:00 AM
Ill post a pic in a minute
Post by: Xboxman20 on July 24, 2003, 11:28:00 AM
Post by: Xboxman20 on July 24, 2003, 12:39:00 PM
so i can trasnsfer it?
Post by: Xboxman20 on July 24, 2003, 12:51:00 PM
Then just drag it to my memory card
Post by: The iNSOMNIAc on July 24, 2003, 02:20:00 PM
| QUOTE (bodman2 @ Jul 24 2003, 01:28 PM) |
| what mem cards are you all using,that have got this trick to work. i still cant get it to work with my Interact mem 8meg maybe its the .inf file needs altering,i thought mem cards are all the same guess not |
to get the interact 8meg flash to work with the driver we need to find out the hardware id info..
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USBVID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USBVID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USBVID_040B&PID_6520
taken from the inf you can see the above cut and paste shows AR driver supports 5 different parts of memorycards
The interact users need to find the hardware id so it can be added to the inf and it should then let us use the driver and work.
Linux users should be able to find the ID easyer than m$ users as it's easyer to question a new bit of hardware in a term
window or even from the log...
i ain`t got linux installed at the mo so i hope someone that has can help us out..
or we poor interact users have to go buy an m$ memory card.. sniff sniff
Post by: Slipknot6d9 on July 24, 2003, 04:19:00 PM
Post by: The iNSOMNIAc on July 24, 2003, 04:36:00 PM
Quote from: bodman2,Jul 25 2003, 12:39 AM
ok i have sussed it out.
Post by: Xboxman20 on July 24, 2003, 08:36:00 PM
Post by: Xboxman20 on July 25, 2003, 12:55:00 PM
Post by: Jed2 on July 25, 2003, 03:41:00 PM
Ok... finally. I made it. Used the USBIO Development Kit DEMO Version which managed to get the vid & pid from the Thrustmaster card... removed ALL lines below [_Devices] (it originally says something like:
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_DBAE
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_0316
%S_DeviceDesc1%=_Install1, USBVID_045E&PID_0280
%S_DeviceDesc1%=_Install1, USBVID_0738&PID_4507
%S_DeviceDesc1%=_Install1, USBVID_040B&PID_6520
and repaced with this line:
%S_DeviceDesc1%=_Install1, USBVid_044f&Pid_0f0c
So, thats it, if you wanna go for the Thrustmaster !
Post by: yoshi on July 26, 2003, 04:44:00 AM
I bought a USB FLASH MEMORY.
And Mega X-Key 2.2 was installed.
Post by: vintage_guitar on July 27, 2003, 12:48:00 AM
Post by: dougyt on July 27, 2003, 09:38:00 AM
other than this, the advice and tutorials here is spot on wonderful.
Also tried using usb flash in adaptor lead made from other halves of usb and xbox adaptor cable, but xbox can't see the memory stick....
Dougyt
I have to be me os no one else will
Post by: nj43 on July 28, 2003, 12:57:00 PM
| QUOTE (Jed2 @ Jul 26 2003, 12:41 AM) |
| Ok... finally. I made it. Used the USBIO Development Kit DEMO Version which managed to get the vid & pid from the Thrustmaster card... removed ALL lines below [_Devices] (it originally says something like: %S_DeviceDesc1%=_Install1, USBVID_05FD&PID_DBAE %S_DeviceDesc1%=_Install1, USBVID_05FD&PID_0316 %S_DeviceDesc1%=_Install1, USBVID_045E&PID_0280 %S_DeviceDesc1%=_Install1, USBVID_0738&PID_4507 %S_DeviceDesc1%=_Install1, USBVID_040B&PID_6520 and repaced with this line: %S_DeviceDesc1%=_Install1, USBVid_044f&Pid_0f0c So, thats it, if you wanna go for the Thrustmaster ! |
Wow, that was a great post. I got my cheapo ($5) gamester memory card to work using the USBIO Development Demo kit. I just lifted the USBVID & PID number and replaced them in the .ini. Thanks!
Post by: yoshi on July 28, 2003, 05:10:00 PM
| QUOTE (dougyt @ Jul 27 2003, 06:38 PM) |
| I have a problem with the AR software. Made the lead, xbox controller works on pc, datel software works with memory card, but it will not transfer any of the modded saves, transfers all other saves ok. I get the error that they are not xbox saves and it refuses to move them, tried all sorts of things I found in various forums but still no luck. Please someone help other than this, the advice and tutorials here is spot on wonderful. Also tried using usb flash in adaptor lead made from other halves of usb and xbox adaptor cable, but xbox can't see the memory stick.... Dougyt I have to be me os no one else will |
Made the lead, xbox controller works on pc, datel software works with memory card, but it will not transfer any of the modded saves, transfers all other saves ok.
Me too.
Post by: 9volt on July 28, 2003, 07:53:00 PM
| QUOTE (yoshi @ Jul 28 2003, 05:10 PM) | ||
Made the lead, xbox controller works on pc, datel software works with memory card, but it will not transfer any of the modded saves, transfers all other saves ok. Me too. |
take a normal save folder and put it on your pc. delete everything in that folder and replace it with the contents of the mod folder. AR will be happy.
Post by: dougyt on July 29, 2003, 01:31:00 PM
Thanks for the replies, it was me being dumb.The zip was adding an extra folder, and that stopped it working. Worked it out and made correct folder nest in zip and voila evox, ftp and everything.
Next to setup font exploit
Great board, great help. Thanks to everyone
Post by: tjc2k4 on August 01, 2003, 06:00:00 PM
Under [_Devices] add the following line
%S_DeviceDesc1%=_Install1, USBVID_05FD&PID_1316
This'll make it recognize your interact card and then you just follow the other steps.
Instead of splicing a controler, I soldered a USB cable to my mem card, but it ends with the same results... usually.
Currently, with my Interact memory card, the AR software will recognize my memory card, and I can copy files to and from it, but when I put the card into the X-Box, it doesn't show any saves, only says the blocks are used. Any ideas?
-- Update --
I think I messed the card up trying to attach the USB cable straight to it.. anyway, I returned the card for a new one and all works fine. I was able to transfer saved games to the card with AR software and from the card to the X-Box HDD no problem.
Post by: kramus on August 02, 2003, 06:02:00 PM
)I am able to solder all the wires, connect it to the PC etc. Except I get this error -
USB Device Not Recognized
One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
I have only ever once been able to get it connected to the PC once and not have that error, but after about 20 seconds of it being plugged in and working the error popped up. Even when I point it to the drivers it won't work. I don't know what i'm doing wrong.
I'm using an official Xbox memory card.
Post by: Capn on August 03, 2003, 07:28:00 PM
Is there a way I can get this to work with the action replay software. I tried plugging the drive to my pc but the Action Replay doesnt see it.
The drive is a 128meg generic drive and i have no issues using it as a memoery card in my xbox........
Post by: Capn on August 03, 2003, 07:32:00 PM
Post by: vintage_guitar on August 05, 2003, 02:03:00 PM
| QUOTE (kramus @ Aug 3 2003, 03:02 AM) |
| I'm really not having much luck modding my Xbox at all. I can't get this homebrew cable to work, if it's not working after today i'll just waste more money and purchase a pre-made one. (i've already purchased a Mega-X Key to find that the flash card is broken and i've also purchased another 32mb flash card to find that it's not compatible. ) I am able to solder all the wires, connect it to the PC etc. Except I get this error - USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message. I have only ever once been able to get it connected to the PC once and not have that error, but after about 20 seconds of it being plugged in and working the error popped up. Even when I point it to the drivers it won't work. I don't know what i'm doing wrong. I'm using an official Xbox memory card. |
try a different USB cord. and make sure you have the ground to ground connected..
Post by: vintage_guitar on August 05, 2003, 02:04:00 PM
| QUOTE (Capn @ Aug 4 2003, 04:28 AM) |
| Im using a usb flash drive as a memory card in my xbox via a usb>xbox adapter i made. Is there a way I can get this to work with the action replay software. I tried plugging the drive to my pc but the Action Replay doesnt see it. The drive is a 128meg generic drive and i have no issues using it as a memoery card in my xbox........ |
download the mega-x key software from www.xbox-saves.com
Post by: Capn on August 05, 2003, 05:11:00 PM
| QUOTE (vintage_guitar @ Aug 5 2003, 11:04 PM) | ||
download the mega-x key software from www.xbox-saves.com |
wow i wish i woulda known earlier taht thexkey was just a usb flash drive...
i almost ordered one too... woulda pissed me offf when i got it to see all i had to do was download software
you got pm also quitar
Post by: Capn on August 05, 2003, 10:41:00 PM
w00t!
Post by: vintage_guitar on August 06, 2003, 03:21:00 AM
Post by: TreFacTor on August 07, 2003, 12:02:00 PM
Post by: STEVEHABS on August 07, 2003, 02:14:00 PM
Post by: vintage_guitar on August 07, 2003, 04:21:00 PM
| QUOTE (TreFacTor @ Aug 7 2003, 09:02 PM) |
| I could never get the action replay, to work on my comp. Now I know that it is just the software, because I still can't copy to it using the software and my new xbox to(usb) pc gamepad in either of my usb ports. tried the mega-x key software just for kicks and it won't install properly, because 2 files won't copy during installation. gonna try one last thing(another comp). everything went fine during installation of the xbox controller, but the software just won't allow me to copy a file to the memory card. "ERROR Writing SAVE".....any suggestions? |
have you made the zip file correctly? try re-making it
Post by: pimp stylez on August 07, 2003, 10:13:00 PM
This is what the circuit board looks like:
Thanks for any help
Post by: STEVEHABS on August 08, 2003, 01:10:00 PM
Post by: metalmatt on August 08, 2003, 03:10:00 PM
http://www.lik-sang....oducts_id=3031
I have no problem getting the save files on it. My problem is that once i try to load them up in the game( and i've tried a couple different files) i get a "cannot load save" message.
can anybody help me out?
Post by: metalmatt on August 08, 2003, 03:14:00 PM
Post by: vintage_guitar on August 08, 2003, 03:31:00 PM
Post by: metalmatt on August 08, 2003, 03:33:00 PM
I'm trying to get roster files for NCAA 2004 to load up.
Post by: vintage_guitar on August 08, 2003, 03:41:00 PM
Post by: metalmatt on August 08, 2003, 03:46:00 PM
Post by: vintage_guitar on August 08, 2003, 03:47:00 PM
Post by: metalmatt on August 08, 2003, 03:54:00 PM
If you meant something else, then could you please explain. Thanks for the responses though.
Post by: vintage_guitar on August 08, 2003, 03:57:00 PM
for the roster..make sure you're updating it too your xbox..not taking it from someone elses
and for the gamesave..what game are you using?
Post by: metalmatt on August 08, 2003, 04:07:00 PM
Roster: FairdaleKings roster file for NCAA Football 2004 (Rost-FKings on AR)
Upon trying to load the roster file, I get a message sayig, "unable to load file"
What do you mean by updating it to my XBOX?
Post by: metalmatt on August 08, 2003, 04:11:00 PM
Post by: STEVEHABS on August 08, 2003, 05:30:00 PM
Post by: metalmatt on August 08, 2003, 05:41:00 PM
I always get a message saying, "unable to load save file from hard disk" when i try to load the saves in the game.
Post by: TreFacTor on August 08, 2003, 09:22:00 PM
| QUOTE (vintage_guitar @ Aug 8 2003, 01:21 AM) | ||
have you made the zip file correctly? try re-making it |
it's not just the 007 hack that doesn't copy over, it's any of the game saves. it's just that the datel software won't work with my comp or 2 other comps that i have tried.
Mine: 333 mhz pentium class
256mb ram
windows 2000 pro
tried both front and rear usb ports
I got the same error from the original action replay that i get from my homemade action replay.
"error writting save".... any other suggestions?
Post by: jedi0 on August 09, 2003, 02:30:00 PM
Is this possibly a case similar to the Interact memory card where a line needs to be added to the xbreader.inf file? Has anyone else experienced this?
FYI, I am using USB 2.0 ports (have tried primary port on back and secondary header port on front).
I suppose I'll see if gamestop has a used M$ brand memory card to try .. . .. .
Post by: RiceCake on August 09, 2003, 02:36:00 PM
Heh, inside I just twisted the cables together and wrapped em with a bit of electrical tape, and because I left the ground wires too short, I wrapped it with a buncha aluminum foil too, heh, it worked
...Only problem is my Windows 98 box crashed when I tried to install XCtrl, but thats my own fault (I fucked the install). But I can say the MadCatz memory card works awesomely with this, I've had more problems with the card included with Action Replay than my MadCatz card. God damn the USB cable was expensive, though, 25 bucks...connecting 20 Guage wire to the Xbox's 12 Guage was a pain in the ass too. It was worth it though, this is the first force-feedback anything I've got to work on this PC!
Post by: RiceCake on August 09, 2003, 06:28:00 PM
Post by: BenKatz on August 13, 2003, 11:35:00 PM
Oh, for those having trouble, there is a similar tutorial here that explains things well too (it also helped):
http://www.xbox-emul...oller-Mod.shtml
Anyone having trouble with an actual Action Replay should try this method instead...10x better.
Post by: vintage_guitar on August 14, 2003, 04:18:00 AM
Post by: WireX on August 14, 2003, 05:53:00 AM
As for a few posts above, I would insulate each of those connections with some electrical tape, and the ground is that tin-foil like stuff that surrounds the wires on each end, basically take a short piece of wire, and solder it to each end of it.
If anyone wants to see how I did mine, I oppened the end case on the breakaway cable, then unsoldered the factory end, and put my usb in. I put the factory case back on, and hot glued the usb male into place. It looks almost stock.
Post by: Dawgy on August 15, 2003, 03:08:00 PM
Nevermind. I think I plugged it into the Xbox, and I think it said it had an error. I also think it said it erased it. Now I think it's working!
Post by: vintage_guitar on August 15, 2003, 06:41:00 PM
Post by: Dawgy on August 16, 2003, 04:23:00 PM
Post by: STEVEHABS on August 16, 2003, 06:42:00 PM
Post by: vintage_guitar on August 16, 2003, 07:26:00 PM
Post by: cdjstyle on August 20, 2003, 11:29:00 PM
BTW, i'm running win98 SE
Post by: STEVEHABS on August 21, 2003, 11:07:00 AM
1. do u zip the whole 007with evox folder and save onto the mem card??
2.can u access a games xbox live feature from the games menu instead of from the dashboard?
3.can u use normal paint to paint a xbox or does it have to be a special kind?
4. and one other question if my dashboard says xbox live on it already does that mean if i sign up ill get a year free or do i need to get the starter kit still.
if anyone can answer these questions id appreciate it
Post by: Demented05 on August 21, 2003, 05:30:00 PM
i spliced the wires with a usb plugged it into a port it said new hardware detected.
i went to add new hardware go to autodetect and unknown device comes up
i click driver update
driver specify the location of the driver (advanced)
check specify a location and browse for the folder where i put xcrtl
and press next the only thing that comes up is C:WINDOWSINFUSB.INF
that isnt the driver i need i want xcrtl
i'm probably missing some studip step but can someone please help!!!
Post by: Demented05 on August 22, 2003, 04:30:00 PM
Anyone?!?!?!?!
Post by: STEVEHABS on August 22, 2003, 05:42:00 PM
Post by: Demented05 on August 22, 2003, 05:51:00 PM
Post by: SteveOA on August 22, 2003, 08:24:00 PM
Post by: gadgetjunkie on August 23, 2003, 07:00:00 AM
I thought I was the first persion to do the Action Replay hack, then found this thread when looking for somewhere to announce it!
Still, some of the info on my webpage might help.
Post by: Dawgy on August 25, 2003, 06:35:00 PM
ALso Ive been trying to install the drivers but when pointing to the file i get an error similar to "The specified file does not contain information about your hardware". What should i do? Im using the drivers from www.codeunderground.com
Thanks!!!
Post by: SteveOA on August 25, 2003, 06:38:00 PM
| QUOTE (SteveOA @ Aug 23 2003, 05:24 AM) |
| Help someone please. Alright, I have an interact flash memory card for the xbox and I did the usb attach thing. So far so good. I put it in to my control when I was done to see if it worked and it did. So i saved a game from the xbox to the card. That also worked just fine. I loaded up action replay(the software) it shows the save there so i transfer that from the card to the computer, no problem there. But where I am having a hard time is transfering stuff from the computer to the card. I transfer something and it shows it transfering just fine and it shows it on my card but once I unplug it from the computer and back to the xbox control it is no longer there, it just disappears. so I try it again, the computer shows it there I unplug the card but this time I plug it back in to the computer and it disappears again. So is showing that its transfering but it really isn't. any help? |
did anyone else have this problem?
Post by: geir4ever on August 28, 2003, 12:00:00 PM
| QUOTE (SteveOA @ Aug 26 2003, 03:38 AM) | ||
|
SteveOA:
I have the same problem, the files just disapear, but I see that the blocks available on the mem-card decrease. Hopefullt I will try to transfer the savegame from a moded Xbox this weekend just to see what happens then.
Post by: gameman733 on August 29, 2003, 11:29:00 AM
. I dont have any extra adaptor things.
Post by: geir4ever on August 30, 2003, 11:48:00 AM
| QUOTE (STEVEHABS @ Aug 29 2003, 09:22 PM) |
| geir earlier in this topic it has stuff for i believe the interact cards that your supposed to add to one of the inf files. and its supposed to make everything work. |
I have edited the .inf file and the mem-card is found. I can transfer save-games from the xbox to the pc, but not the other way.
Post by: STEVEHABS on August 30, 2003, 01:27:00 PM
Post by: gameman733 on August 30, 2003, 03:27:00 PM
| QUOTE (STEVEHABS @ Aug 30 2003, 10:27 PM) |
| hmm the only guy who could help u probably is vintage |
who are you talking to? me?
EDIT: Im not sure if this is the best place to ask, but does anyone know exactly what the yellow wire does? I just want to make sure its not super important for something. I thought it was like an extra power wire, but ive heard that its used for light guns/racing wheels, which makes me think its a data wire.
Post by: Jenan773 on August 30, 2003, 04:48:00 PM
| QUOTE (geir4ever @ Aug 30 2003, 08:48 PM) |
| I have edited the .inf file and the mem-card is found. I can transfer save-games from the xbox to the pc, but not the other way. |
I have, like many others it seems, bought the crappy InterAct card that is almost unwritable. (Actually I did manage to change the name of it with the AR program just now, but copying saved games to it almost always causes a crash, either directly or after a few seconds. In any case, nothing shows up afterwards, except for some space missing.)
Very annoying this, and perhaps easiest solved by getting another (ridiculously expensive) memory card. But since I won't be able to buy one before Monday anyway, I can just as well look closer at it.
There are some parameters in the registry. Most are set by xbreader.inf, but some are not defined there. Could somebody with a working card please export and post the branch (see below)? Also, the output from USBview.exe might also be interesting, from a working InterAct card or any working card at all.
Here follows data for a non-working InterAct card.
-- USBView.exe:
Device Descriptor:
bcdUSB: 0x0110
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x20 (32)
idVendor: 0x05FD
idProduct: 0x1316
bcdDevice: 0x0100
iManufacturer: 0x00
iProduct: 0x00
iSerialNumber: 0x00
bNumConfigurations: 0x01
ConnectionStatus: DeviceConnected
Current Config Value: 0x00
Device Bus Speed: Full
Device Address: 0x05
Open Pipes: 0
-- Registry:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/USBIO/Parameters
@=""
"PowerStateOnOpen"=dword:00000000
"PowerStateOnClose"=dword:00000000
"EnableRemoteWakeup"=dword:00000001
"MinPowerStateUsed"=dword:00000003
"MinPowerStateUnused"=dword:00000003
"AbortPipesOnPowerDown"=dword:00000001
"SuppressPnPRemoveDlg"=dword:00000001
"RequestTimeout"=dword:000003e8
"ShortTransferOk"=dword:00000001
"MaxIsoPackets"=dword:00000040
"UnconfigureOnClose"=dword:00000001
"ResetDeviceOnClose"=dword:00000000
Post by: victortrash on August 30, 2003, 04:48:00 PM
Post by: arez on September 02, 2003, 01:52:00 PM
or to ask a stupid question but can i cut up the little mini connector instead of the controller and on either 1 do i cut b4 or after the little widget thing the plastic/rubber buldge in the cord (yep i said widget next best thing to doohickey
thanks for answering all my stupid ass questions )
Post by: arez on September 02, 2003, 01:53:00 PM
"
" ALOT o.O
Post by: arez on September 02, 2003, 02:33:00 PM
| QUOTE |
| I have a question. If you touch the wires while they're plugged into the USB port, could you get seriously hurt from the shock? Is it a strong enough shock to hurt you, or is it just a small shock? |
i derno what u ppl think....but that quote sounds alot like
| QUOTE |
| is it gona hurt if i practice french kissing my light socket? |
sounds like a stupid question
Post by: STEVEHABS on September 03, 2003, 04:18:00 AM
Post by: oblox on September 03, 2003, 12:52:00 PM
It helps the Xbox identify what you have attached to it
So you don't need to use it for connections to your PC.
Post by: Zb2k on September 03, 2003, 01:44:00 PM
Post by: arez on September 04, 2003, 12:13:00 PM
but other then that im peachy
thanks ev1
thx
Post by: arez on September 04, 2003, 12:14:00 PM
thx
Post by: vintage_guitar on September 04, 2003, 08:03:00 PM
| QUOTE (gameman733 @ Aug 29 2003, 02:29 PM) |
| This is probebly a stupid question, but is it possible to put both the USB and the xbox plug on the cable? I'm guessing yes, but i dont feel like expirimenting . I dont have any extra adaptor things. |
yes, it's in one of the bottom pic on the tutorial
Post by: vintage_guitar on September 04, 2003, 08:24:00 PM
any suggestions?
Post by: Chicken Scratch Boy on September 07, 2003, 05:43:00 PM
Post by: STEVEHABS on September 08, 2003, 02:54:00 AM
Post by: Chicken Scratch Boy on September 08, 2003, 06:50:00 AM
Post by: Chicken Scratch Boy on September 08, 2003, 03:39:00 PM
Post by: vintage_guitar on September 13, 2003, 02:58:00 PM
| QUOTE (STEVEHABS @ Sep 8 2003, 05:54 AM) |
| well forget about using this method unless u use the new mechinstaller that fixes the clock bug or the audio exploit everything else has reset on eject problem or clock problem. audio method rules all |
If you're full of shit.. Don't bother posting. Especially when you give NO reasons in your negative feedback. Especially considdering, rarely anybody else gets the clock bug/reset on eject only depending on the method you used to install it. Reset on eject is dependant on the bios loader, not the METHOD jackass, and the clock bug is the fonts you have, ANOTHER sign that you don't know what you're talking about.
Post by: STEVEHABS on September 14, 2003, 03:12:00 AM
Post by: vintage_guitar on September 17, 2003, 04:44:00 AM
Post by: STEVEHABS on September 17, 2003, 05:04:00 AM
Post by: arez on September 17, 2003, 07:21:00 AM
my grand total acoplishment is iw ant to b able to Run Linux on my xbox
any help?
the prob im having is that my ftp isnt working...never was
i got the cross over cable and everything i should need...but it still dont connect
the xbox says No Link! and it dont show IP address or anything
help plz?
Post by: arez on September 17, 2003, 07:49:00 AM
Post by: arez on September 18, 2003, 09:34:00 AM
if not plz goto link in my profile
Post by: arez on September 18, 2003, 08:44:00 PM
some1 helped me
i set up my router an it worked
thx anyways
Post by: blackbishop on September 21, 2003, 02:36:00 PM
now i dont have to spend 40 or so dollars for action reply. great work
Post by: arez on September 28, 2003, 12:58:00 PM
Post by: xOoDarkShadowOox on September 29, 2003, 01:32:00 PM
Post by: Jesper64 on September 29, 2003, 10:30:00 PM
I had the same problem too, not exactly sure what was wrong with it. I ended up doing this:
1. Created a campaign in mechassult on the xbox
2. Using the dashboard,copied the save from the HDD to the memory card
3. Connected memory card to PC
4. AR replay software should show a mechassult save
5. Copied the save to the PC
6. Opened up the save from the PC HDD (should be under where you installed ARsave)
7.Copy and overwrite the files from the hacked save.
8. Use AR to copy the new hacked save to the memory card.
Hope that works, if not give us a PM and I can try sending mine to you.
Post by: bolts00 on September 30, 2003, 04:10:00 PM
Just search for "xbox usb pc adaptor" on eBay and you will find the cable.
later,
Bolts
Post by: ShadowKiller on October 03, 2003, 01:00:00 PM
| QUOTE |
[_Devices] %S_DeviceDesc1%=_Install1, USBVID_05FD&PID_DBAE %S_DeviceDesc1%=_Install1, USBVID_05FD&PID_0316 %S_DeviceDesc1%=_Install1, USBVID_045E&PID_0280 %S_DeviceDesc1%=_Install1, USBVID_0738&PID_4507 %S_DeviceDesc1%=_Install1, USBVID_0E4C&PID_044B |
Here is my driver code for the GAMESTER MEMORY CARD
Post by: volcomman2003 on October 03, 2003, 08:20:00 PM
i have shrink wrapped the usb wires since that picture it the farthest picture down on the site
Post by: ShadowKiller on October 03, 2003, 08:39:00 PM
| QUOTE (volcomman2003 @ Oct 4 2003, 12:20 AM) |
| nice memory card shadowkiller check mine at the link below i have shrink wrapped the usb wires since that picture it the farthest picture down on the site |
nice mod .... i think i am going to shorten the USB cable and shrink wrap
Post by: volcomman2003 on October 03, 2003, 09:36:00 PM
yeah i had the usb directl;y coming out of the uop but i found that it was then to hewrd to pull out of the usb port so used longer wires and shit so then i shrink wraped it and it looks awesome i gotta get a new dig camera cause my old one broke then i will post a picture on my site
Post by: kirks4 on October 04, 2003, 07:17:00 AM
Post by: Jesper64 on October 10, 2003, 06:47:00 PM
| QUOTE (zakharm @ Oct 11 2003, 02:25 AM) |
| if i can connect my xbox controller to the PC, can i then put a standard xbox memory card in the controller and get accesss to the card? |
Yes you can, you will however need to download the AR program as that will allow you to upload saves and it has drivers for the memory card.
Post by: error21 on October 14, 2003, 10:09:00 PM
Are the XCTRL drivers illegal or something because i cant find em anywhere.
if there not could someone tell me where to get em, i tried xbins but they not there.
i cant get into the codeunderground website
Post by: vorbis on October 15, 2003, 04:45:00 AM
Post by: blakey on October 16, 2003, 02:22:00 PM
used usb view and added the pid,vid lines to the xbreader.
can save off the mem card from box onto the pc no probs but when i try to save on to the memory card from the pc it transfers no error message but cant see the saves when i plug the card into the box or even when i plug the card back into the action replay software ,the saves seem to be there cause they are taking up space on the card but there is nothing visable.
its not a MS card just a cheap generic one
got anyideas what wrong ?
edit re read thread and can now i aint the only one having this problem
Post by: The Timmy on October 21, 2003, 12:16:00 AM
I would like to know you can just wire up the xbox memory card directly to a PC USB by soldering a usb Cable to to the corrisponding pins on the inside of the memory card.
--slightly modifying the concept found in this tutorial:
http://www.i-hacked....=article&sid=34
instead of soldering the USB ports to the controler, solder the cable to the memory card itself, and install the AR software.. it works in my head.... but I don't feel like frying another memory card so soon after my last one. (don't ask)
And based on that idea, with my dead memory card, I took the board out and dremeled a hole to fit a USB port, so I have a more portable USB adapter for the controler.....
Could I take said home made USB adapter, get a male to male USB cable and plug my xbox controler to the PC via home made memory card adapter that isn't really a memore card anymore and be able to use my controler on my PC? --and if so, can I plug a regular xbox memory card into the second memory slot on my controler and transfer the save games that way?
PM me for pics of my work on that usb memory card port for the xbox controler should you wish to see it.
Post by: Jordanus on October 29, 2003, 05:30:00 PM
said, but i cannot get my mem card to detect in AR xbox .
anyone? (ps i have a interative mem card.) thanx
cya
Post by: blakey on October 31, 2003, 09:41:00 AM
Post by: PooN on November 02, 2003, 06:46:00 PM
--PooN
Post by: STEVEHABS on November 03, 2003, 02:36:00 AM
Post by: fenderbot on November 03, 2003, 08:05:00 PM
Post by: Lucifix on November 05, 2003, 10:12:00 PM
Post by: PooN on November 06, 2003, 08:58:00 AM
| QUOTE |
| PooN Posted: Nov 3 2003, 04:46 AM X-S Senior Member Group: Members Posts: 256 Member No.: 33323 Joined: 20-April 03 I had this mod working perfectly just like the tutorials says to do it when I had win98. It has been a while since I have tried to do this, but recently I upgraded to win xp and it does not work. any one know why? --PooN |
Can any one help me out please? I was able to get this to work fine with win98, and now that Im in winxp, no driver seems to work. winxp, M$ memory card, tried several drivers, can ne1 tell me what is going wrong here?
--PooN
Post by: Jesper64 on November 07, 2003, 03:38:00 AM
I'm running XP too.
I've used Xctrl rebooted. Then used the AR with the drivers and it all worked.
If you want PM me and I can send you my version of Xctrl. But I"m guessing you've probably got the same version.
Post by: PooN on November 07, 2003, 09:53:00 AM
Thank You
--PooN
Post by: Jesper64 on November 07, 2003, 06:49:00 PM
But strange, cause I always thought that you could hook up the Memory card to the USB directly. Maybe XP you have to use differnt drivers, perhaps XP's removable storage ones. THough not sure how they would handle FATX.
Post by: TheSpike on November 16, 2003, 05:21:00 AM
WTH?
http://us.codejunkies.com/home.asp?c=US&cr...=$&r=0&l=1
Post by: mkjones on November 17, 2003, 12:58:00 AM
Please help out if you can...
Post by: mkjones on November 17, 2003, 05:07:00 AM
Post by: mkjones on November 17, 2003, 09:23:00 AM
Anyone reccomend a 32mb version that works with the xbox?? Ive looked around but cant find any on eBay that are in the WiKi list??
Post by: trasixes on November 20, 2003, 11:22:00 PM
. I've never read this thread, and started playing with the Action replay driver.... next thing I know, I have an Action Replay. Thought I might've been the first to do this, and now I see I'm possibly the last LOL.
Post by: da_shatterer on December 06, 2003, 06:29:00 AM
Post by: UGLYMONKEY on December 12, 2003, 03:33:00 AM
Cut off the plug from a usb cable and stripp the wire. Drill a small hole in the back of the pad to pull the wire through, and join the stripped end of the usb cable to the cable which connects to the pcb.
You pad will now have both orig. X-box and USB cables.
Post by: BigTony on December 12, 2003, 04:19:00 AM
