Post by: godsyn on June 13, 2004, 09:53:00 PM
Post by: -maximus- on June 25, 2004, 01:21:00 PM
description of my problem:
I'm having a similar problem recently.
I've an Xbox for a long time, v1.1, uses an X-tender-based modchip (29 solder points). It never had any errors, but after transporting it back from the last LAN, it wouldn't turn on normally. It boots up 3 times, as described, and on the third time a red an green light goes on. Resets date all the time.
Post by: deja-vu on August 14, 2004, 04:18:00 AM
Any body know how to short it back again?? or is there any way??
Post by: thchardcore on August 17, 2004, 02:56:00 AM
Post by: cameleon75 on September 16, 2004, 06:36:00 PM
My xbox doesn't boot anymore.... I get that blinking red/green led on front w/ the "your xbox is totally screwed and contact M$ to get your pos fixed." The originial sounds load, and the first screen loads but then i get the error "07" in upper left hand corner and xbox requires service.
Whats gone wrong? Any suggestions? Do I need to update my version of evox? I know how to ftp games over and have very limited knowledge of whats inside, but have opened it up and checked stuff out and haven't had problems like this before..
Any suggestions or other questions you guys may have that will assist me in fixing this w/o having to get a new chip installed would be sweet. I'll be checking this string in the next few weeks for any suggestions you guys have. Thanks for a sweet ass site.
Cameleon75
Cheers!
Post by: henhauser on November 08, 2004, 10:37:00 AM
flashes red yellow green, and boots again. Flashes red yellow green once more, boots again. And now it stays on blinking red yellow green, with no tv-screen at all.
Anyone knows what is wrong - please?
Post by: Psychoschiz on November 14, 2004, 02:04:00 PM
I have a v1.3 xbox, an X2 lite.
I have never had any problems with my xbox, but when i moved house a month ago, and since then I have also been having problems.
When I turn the xbox on, it resets it self 3 times, on the 3rd reset I have a blinking red and green light and no audio or video output.
The thing with this is that it is intermitant,
When i diable my x2 chip using the swith that came with it, I get it booting into the MS dash fine ( HDD LOCKED ) and I can use normally.
Im assuming there is a fix for this, but I can not seem to sort it.
I have checked all my connections, D0 seems ok, ltp points look ok, usb connector is ok, and looks like the power to the x2 is ok.
But clearly i am missing something.
any help would be appreciated.
Post by: mrkyle on November 14, 2004, 06:14:00 PM
Post by: e2speedballr on December 22, 2004, 10:32:00 AM
QUOTE(cameleon75 @ Sep 17 2004, 02:39 AM)
My xbox doesn't boot anymore.... I get that blinking red/green led on front w/ the "your xbox is totally screwed and contact M$ to get your pos fixed." The originial sounds load, and the first screen loads but then i get the error "07" in upper left hand corner and xbox requires service.
me too, except i havent done any mod to it, just took it apart to get a feel for it. I put it together w/o the screws and now it gives me that exact same message.
Post by: Freezer on December 21, 2003, 12:51:00 AM
1) Installed Aladdin Mod into Xbox 1.4/1.5
2) After installing the aladdin mod into what you think is an xbox 1.5 the xbox boots three times and then proceeds to flash red and green.
3) The mod BIOS boots up fine.
4) The original BIOS boots up ONLY if you set the time from the Mod BIOS.
5) The clock keeps on resetting itself. [/B]
This can be caused by the following reseans.
1) The L2 pin you soldered on the mod chip has touched the small pin hole next to it. I am talking about Pin 2 on the motherboard not the L2 connection for HD led lights.
2) You have wired the Xbox up as a 1.5 xbox when in fact it is a 1.4 xbox. Both MAY have the focus chip. The easiest was to find out it to wired it as a 1.4 and see if she boots up.
If you really want to check it, you must check the voltage on the L2 pin with the Xbox turned on. It should be a steady 0volts and 3.3 volts on the pin across from the pin that is 5 pins up from L2. Wiring up the box a 1.5 will drain the time settings.
3) If your solder job is nice and big, ensure you gently scratch the gaps between each metal plate on the mod chip to ensure there is no shortage between them.
Set your clock and have fun.