xboxscene.org forums

OG Xbox Forums => Newbie Forums => FAQ => Topic started by: GIR6K on April 03, 2004, 06:46:00 PM

Title: What Do I Use To Open The Xbox?
Post by: GIR6K on April 03, 2004, 06:46:00 PM
there are torx sets that come with all the sizes of the torx.

i suggest that.
Title: What Do I Use To Open The Xbox?
Post by: slappy00 on June 08, 2004, 05:57:00 PM
In a pinch i use hex keys for the inner screws, you just have to have a good set or you will strip em.
Title: What Do I Use To Open The Xbox?
Post by: gamezfreak on September 02, 2003, 10:11:00 AM
You will need 2 torx screwdriver bits/screw drivers.

A Torx 10 and a Torx 20.
Title: What Do I Use To Open The Xbox?
Post by: Xeero on September 03, 2003, 06:56:00 AM
I believe you also need a T15 to remove the hard drive from its cradle.
Title: What Do I Use To Open The Xbox?
Post by: frenzal_dude on September 16, 2003, 12:17:00 AM
i used a torx10 perfectly well for upgrading my hdd.
Title: What Do I Use To Open The Xbox?
Post by: Xeero on October 11, 2003, 05:35:00 AM
Yeah, I recently lost my T15  unsure.gif and I used the T10 in a pinch.  The T15 is a better fit, but the T10 still works fine with no stripping or anything.