xboxscene.org forums
OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: shambles1980 on March 10, 2012, 10:24:00 AM
-
the easiest way to flash a tsop IMO is to just use hexen and tell it to flash the tsop.
of course you have to be softmodded 1st so that the hexen disk will boot.
but hexen has a few bios's on the disk already.
i would use the M8 or IND bios personaly. had some issues with LBA48 support using the x2
if you arent sure about the bios size, hexen will also expand the smaller 256k bios's sojust pick that option.
All you need to do then is.
Solder up the tsop points.
Boot your softmodded xbox with hexen in the drive "heimdalls xbox engineering disk"
find the tsop tools.
select flash tsop " winbond or non winbod. look at your tsop chip to figure out what you have"
Chose one of the non 1.6 bioses "256k" And let it flash the chip for you.
you can always just use the 256k M8 or ind bios from the hexen disk and flash any way you prefer. "like in the tutorial you posted" so no need to softmod 1st. although your most of the way through softmodding if you follow the tutorial you posted any way.
just as a question of interest..
why do you want to use aid?
p.s
i just had a look at the tutorial you posted and i dont think that URL can be allowed on the page as it links to a file that contains original/modified xbox files.
We arent allowed to link to these things here.
-
Im prety sure SID and Hexen are more up to date than AID..
SPPV says he updated SID Installer a little while back, And i know Hexen is what i use.
but whatever you decide to do should be fine once your bios is flashed.
-
All so called installer discs for the xbox are outdated, just use hexen as above to flash the tsop which will be a winbond since its a V1.4 , install any dashboard so that you have ftp access then just copy across the latest version of XBMC. No other dash has been updated since 2005 or there abouts.