Post by: Spamwich on June 29, 2011, 02:26:00 PM
Anyways, what is the latest stable release? Like i said, will be in the hands of the ultimate noob. I know the inevitable WILL happen eventually, but I would like to prolong it for now. Assuming 1mb x2 bios for a 1.0 box without a modchip.
Also, any recommendations on dashboards/skins that won't allow anything malicious to be done? such as re-flashign the bios, or deleting dashboard files, etc?
Post by: spliff721 on February 02, 2020, 04:57:00 PM
as far as dash/skins. check out XBMC with the JX720 skin. you can remove tabs that lead to sensitive stuff, like file explorer and what not. www.XBMC4XBOX.org
Post by: Spamwich on February 02, 2020, 05:01:00 PM
Post by: lordvader129 on June 29, 2011, 08:04:00 PM
QUOTE(Spamwich @ Jun 29 2011, 05:01 PM) 
So, I flashed the xx91 256k bios after doing some reading that three latest evox build will flash it onto either chip. Boot the flubber, gets to ms logo, xecuter2 text shows up instead of microsoft, and then error 13, unable to launch dash. Not the old style of error screens, so I'm assuming my dashboard is in the wrong location. Hdd is still locked so I have to hotswap in. formatted everything and now have just the xbox files with default.xbe at three root off the c drive. Am I missing something, such as bios config files? I seem to remember that they aren't needed for a single dash like that. Maybe there its someone who knows what I am missing.
rename the default.xbe to evoxdash.xbe
also, you dont need to hotswap, just use a boot disc (its safer)
Post by: Spamwich on February 03, 2020, 02:03:00 PM
Post by: Spamwich on February 03, 2020, 02:21:00 PM
Post by: Spamwich on February 03, 2020, 04:45:00 PM
Post by: Heimdall on February 03, 2020, 04:59:00 PM
Post by: Spamwich on February 03, 2020, 06:57:00 PM
QUOTE(Heimdall @ Jun 30 2011, 04:59 PM) 
Don't touch X2.4983. X2.5035 allows you to change its config without flashing, by simply editing x2config.ini, and that's what I use on all my 1.0/1.1 TSOPs.
Meh, didn't read the read me until things went wrong. Saw a 5035 and 5035 old... assumed old meant it was outdated and flashed the 1.6/1.6b bios. Now I get no A/V output, but am still able to FTP into the box, so I assume it is booting the dashboard. If I Delete x2config so it auto loads evoxdash.xbe and place the 5035_old in the bios folder, will i be able to navigate (blindly) through the dash to flash a new bios? Or do i now have to get a chip to fix this box? If the first is possible, can someone walk me through the buttons to flash my bios?
Post by: lordvader129 on June 30, 2011, 10:18:00 PM
QUOTE(Spamwich @ Jun 30 2011, 06:57 PM)
Meh, didn't read the read me until things went wrong. Saw a 5035 and 5035 old... assumed old meant it was outdated and flashed the 1.6/1.6b bios. Now I get no A/V output, but am still able to FTP into the box, so I assume it is booting the dashboard. If I Delete x2config so it auto loads evoxdash.xbe and place the 5035_old in the bios folder, will i be able to navigate (blindly) through the dash to flash a new bios? Or do i now have to get a chip to fix this box? If the first is possible, can someone walk me through the buttons to flash my bios?
if your getting FTP access it should be booting the dash
just make a new evox.ini where flash bios is the only option, then all you should have to do is hit A (to select flash bios) A again (to select the bios) and Y (to flash)
Post by: Spamwich on February 03, 2020, 09:37:00 PM
QUOTE(lordvader129 @ Jun 30 2011, 09:18 PM)
if your getting FTP access it should be booting the dash
just make a new evox.ini where flash bios is the only option, then all you should have to do is hit A (to select flash bios) A again (to select the bios) and Y (to flash)
Beautiful! Can't believe I didn't think of that.
We have picture!
Except... I'm an idiot, forgot to add in FTP to the evox.ini, now I have to hotswap to get the original .ini and x2config back in there so I can boot XBMC
This post has been edited by Spamwich: Today, 05:39 AM
Post by: lordvader129 on June 30, 2011, 11:29:00 PM
QUOTE(Spamwich @ Jun 30 2011, 09:37 PM)
Beautiful! Can't believe I didn't think of that.
We have picture!
Except... I'm an idiot, forgot to add in FTP to the evox.ini, now I have to hotswap to get the original .ini and x2config back in there so I can boot XBMC
you should unlock your HD so you dont have to hotswap all the time
Post by: Spamwich on July 04, 2011, 04:20:00 PM
I hotswap and xboxhdm is showing that I have my WD8xxxx attached, along with my cd rom, during the startup. When i get to the point to choose xbrowser, it is saying there is no hdd.
I grabbed a stack of old 8/10GB hdds from past projects, i get tons of errors when bootign with a locked HDD, and xbrowser will state that it is locked. The unlocked drives will state that there is no HDD present.
With all drives, I have to swap in during the xboxhdm boot screen, otherwise my bios will hang up when tryign to read a locked drive.
Same mobo/cd drive I have always used for sucessful mods.
I am using the same xboxhdm disk that I have used and had work in the past.
Any ideas?
Post by: xboxmoderz94 on August 23, 2011, 02:05:00 AM
you can find these files at this site and it will show you how to tsop flash now they were a bit fuzzy now to get the files to transfer to the hdd with action replay you will have to contact me but if you already have a hacked xbox you can ftp the save and run it with the game 007 since its a 1.0 just like mine you might not have to flash with eurasia but on your tsop write down anything you thinks important i think if yours is a 1.0 just like mine one of these should match mine now if you have a hynix if it says hy29f080**** whatever dont worry about the extra numbers at the rest of the chip if it says hy29f080 thats what it is forget about this ****
oh ya heres the site
http://www.biline.ca/xbox_mod.htm
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST - 49LF020",0x40000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
oh and heres to know what the tsop looks like
http://www.google.co...a...so0n&zoom=1