-
Hi all the other day I softmodded my Xbox and installed xbmc then I decided it was time to tsop flash it i soldered the points, put xbmc on the c drive and tried to flash it with slayers nothing just sat there saying erasing for 3 hours so i went in search of something else but by now i think Iv tried just about everything heres a list of what I'v tried
splinter cell evox raincoat game save=cant telnet to it
eurasia flash disc = discovered you need a hacked bois to boot and black screen
aid = wont boot might be the dvd im using
splinter cell evox with custom .ini = same as slayers
I dont know what else to try so any help would be appreciated
Oh yea the xbox is 1.4 and the tsop is winbon and the softmod was installed with ndura
Thanks
-
Use a disc called HeXen it can flash 1.4 winbond xbox's i have used it twice on two of my xbox's and it has worked out fine so do a google search for HeXEn (Heimdall's Xbox Engineering Disc) and here is a list of what it can do
http://forums.xbox-scene.com/index.php?showtopic=729570
then once you have it burn it to a disc 4x speed then put it in your xbox it may take 40sec+ to boot so don't freak out and think its not reading it then go to TSOP Flashed / Chipped Xbox Tools
then Winbond Flash then choose a bio that you want your xbox to have for me i always choose X2.4981.06 (F only) as it boots the xbox up faster then the other bios but its up to you then it will say that you have 5secs to flash the bios as it launches GENTOOLX so push right to advance then flash bios then HDD then there should be a file called bios.bin then push A on that then done.hope i helped
This post has been edited by BuraddoX: Apr 20 2011, 12:58 AM
-
QUOTE
eurasia flash disc = discovered you need a hacked bois to boot and black screen
not true, eurasia can boot under any softmod or gamesave exploit (and the black screen is normal)
you can also try a splinter cell eurasia gamesave
HeXen also uses eurasia for winbond flashing
-
QUOTE(lordvader129 @ Apr 20 2011, 03:13 AM)

not true, eurasia can boot under any softmod or gamesave exploit (and the black screen is normal)
you can also try a splinter cell eurasia gamesave
HeXen also uses eurasia for winbond flashing
But HeXen is much more user friendly to use to flash Bios.
-
Ok thanks guys for the help. i burnt HeXEn and ran it,went to flash winbon it booted to the linux but i cant get to the advanced setting i have tried numerous times is there some special trick to do this.
-
You need a Genuine MS controller, and you have to be quite quick - you only get a few seconds.
-
Hmm bummer both my controller are 3rd party
any other options
-
Use Eurasia.
-
I tried that again but nothing I left it there for almost an hour but still nothing
-
Recheck your solder points! Ive used Eurasia with my Xbox 1.4 (Winbond TSOP) and it worked like a charm.
Use quality DVD-R ´s for the Eurasia Flash Disc and the Bios Disc! Most drives dont like CD-RW
-
QUOTE(hawkeye2309 @ Apr 20 2011, 01:01 AM)

tried to flash it with slayers nothing just sat there saying erasing for 3 hours
Your solder points are fine. I would bet it is probably your media type.
-
QUOTE
Your solder points are fine. I would bet it is probably your media type.
Yea i re soldered the point just to be sure but the CDs are verbatim and so are the DVDs would it make a difference if the console is pal and not ntsc maybe i need to switch it to get eurasia to work or dose any one know of a program that can be loaded off the HD. Thanks for the help so far
This post has been edited by hawkeye2309: Apr 23 2011, 10:01 AM
-
My Xbox is Pal too, cause im from Germany. Ive used for the Eurasia Flashdisk a DVD-R and for the Biosdisk also a DVD-r. Remember to change you bios name on the Bios disc to "bios.bin" (Case sensitive)
And you say that you resoldert the "Point", remember that you need to solder 2 Points.
Solder Points
This post has been edited by Xdor77: Apr 25 2011, 01:36 AM
-
sorry points
also Ive just given up I'm going to try and find a modchip anyone know were to by them with shipment to Australia
-
QUOTE(hawkeye2309 @ Apr 25 2011, 04:13 PM)

sorry points
also Ive just given up I'm going to try and find a modchip anyone know were to by them with shipment to Australia
http://www.quantronics.com.au/products/xbox/modchips (http://www.quantronics.com.au/products/xbox/modchips)
They have xbox modchips (IMG:style_emoticons/default/happy.gif)
-
Oh, you gave up...
Today ive had here a friends box with the same symptoms than yours.
After 2 hours of booting and getting a black or frozen screen ive switched the
Dvd drive and 3 minutes later the Xbox was finaly Tsop´ed.
The Dvd Drive sounds just like it could read my burned disc, but he doesnt.
After the TSOP flash ive cleaned the Laser Lens from the not working drive with
a mixture of cleaning alcohol and window cleaner. The lens was very greasy from
nicotine and other stuff. After cleaning the drive worked just like the first day.
-
Ok thanks Ill try that I don't have a second drive but Ill try cleaning the lens thanks
-
QUOTE(Xdor77 @ Apr 21 2011, 07:28 PM)

Recheck your solder points! Ive used Eurasia with my Xbox 1.4 (Winbond TSOP) and it worked like a charm.
Use quality DVD-R ´s for the Eurasia Flash Disc and the Bios Disc! Most drives dont like CD-RW
Can you fix the xbox360? 
QUOTE(hawkeye2309 @ Apr 29 2011, 11:14 PM)

Ok thanks Ill try that I don't have a second drive but Ill try cleaning the lens thanks
Can you fix the xbox360 or ps3? I am looking for someone who can fix them.
-
well some windbond chips are never able to be softmodded but i recommend 007 gamesave hack with eurasia and it has to be the right size bios since yours is 1.4 you will need a 256k bios
-
And again, he's unlikely to be still waiting after four months. He's even less likely to be waiting for incorrect information - you can softmod all Xboxes (even ones with Winbond chips), and you can flash Winbond chips as well, and Eurasia isn't the only option.