xboxscene.org forums

OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: demonicfox666 on April 06, 2011, 02:46:00 PM

Title: Tsop Help
Post by: demonicfox666 on April 06, 2011, 02:46:00 PM
hi guys, basicly im trying to a tsop flash on a 1.1 hynix xbox,
iv tried every possible solder point i have found but no dice
it constantly shows  id09 device id 00 flash not writable
iv used slayers,eursia(which simply black screens on me when i load the xbe) and raincoat
please help if you can its for my slim xbox project
Title: Tsop Help
Post by: xboxmods2977 on April 06, 2011, 03:15:00 PM
Your solder joints are not correctly soldered. Also, use evox to flash.
Title: Tsop Help
Post by: demonicfox666 on April 06, 2011, 03:35:00 PM
my solder points are soldered correctly iv checked and checked again and swapped points and checked but nothing
Title: Tsop Help
Post by: Heimdall on April 06, 2011, 04:16:00 PM
No, xboxmods2977 is absolutely correct. id09 device id 00 flash not writable means what it says - your flash isn't writeable, and it's because your soldering isn't correct. Have another look, and maybe post some photos of your soldering.
Title: Tsop Help
Post by: demonicfox666 on April 06, 2011, 05:00:00 PM
sorry but i have tried all solder points, desoldered resoldered , i tried original point just bridging with solder you cant mess that up unless u burn the board i checked checked and checked and with a high power magnify glass the poins wouldnt work soo i then un bridged these points, i then went on to do the alterntive top 2 point assuming u can do both on top and not have to worry about the bottom atall, didnt work so i desoldered the 2 top alternatives and moved to the bottom, once again no joy
Title: Tsop Help
Post by: Heimdall on April 06, 2011, 05:27:00 PM
And there's your problem. For a 1.1 you have to solder one pair of points on  the bottom of the motherboard,  and one pair of points on the top of the motherboard - see this set of pictures.
Title: Tsop Help
Post by: BuraddoX on April 06, 2011, 05:56:00 PM
Here use this guide it shows the most best ways of flashing and all the solder points for all versions of xbox
http://www.mediafire...yhtdhz2qakp2ve6
Its the Flashing_TSOP_With_ANY_Version_XBOX_By_SLuSHIE i used it to TSOP 2 xbox's and it has worked out fine.
Title: Tsop Help
Post by: Heimdall on April 06, 2011, 06:20:00 PM
.... which is exactly what I said 2 posts back. The points you solder come in pairs, and you put a solder bridge between them - one solder bridge on the top and one on the bottom.

Edit: Just read your edit, and we're both saying exactly the same thing! smile.gif smile.gif
Title: Tsop Help
Post by: demonicfox666 on April 06, 2011, 07:09:00 PM
hey guys thanks for the help , the problem is from the alternative unlock point diagram i got the impression that you could choose to do both on top or both on bottom but thanks anyhow guys, just flashed a bios i had sitting on my desktop worked like a charm, will flash indbios in about 5 mins haha but anywho  time to start slim xbox build biggrin.gif but first Ramen Tiiiiiiiiime!!!
Title: Tsop Help
Post by: BuraddoX on April 06, 2011, 07:54:00 PM
QUOTE(demonicfox666 @ Apr 7 2011, 02:09 AM) View Post

hey guys thanks for the help , the problem is from the alternative unlock point diagram i got the impression that you could choose to do both on top or both on bottom but thanks anyhow guys, just flashed a bios i had sitting on my desktop worked like a charm, will flash indbios in about 5 mins haha but anywho  time to start slim xbox build biggrin.gif but first Ramen Tiiiiiiiiime!!!

That's cool man good luck happy.gif