xboxscene.org forums

OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: spliff721 on March 10, 2011, 05:18:00 PM

Title: 1.4 Tsop Flash
Post by: spliff721 on March 10, 2011, 05:18:00 PM
a v1.4 xbox has come into my possesion. i am thinking of doing my first TSOP flash. i have already softmoded it with Krayzies 1.1.1. i have been reading, and some of the tutorials show two points on the top of the MOBO and some say there is a 3rd on the bottom.

also, what bios do i need?
Title: 1.4 Tsop Flash
Post by: Heimdall on March 10, 2011, 05:35:00 PM
For 1.2-1.5 Xboxes both solder bridges are on top of the motherboard. The point on the bottom is an alternative point.

In terms of BIOS, you need a 256kB BIOS i.e. iND-BIOS.5003, Evox M8+ or X2.4981.
Title: 1.4 Tsop Flash
Post by: spliff721 on March 10, 2011, 05:38:00 PM
thanx mate
Title: 1.4 Tsop Flash
Post by: BuraddoX on March 10, 2011, 05:49:00 PM
Download this guide man its so easy to TSOP
http://dwl.xbox-scene.com/~xbox/xbox-scene..._By_SLuSHIE.rar
my brother did the soldering to my 1.4 and it work out fine all you have to do is just solder two points
(IMG:http://i911.photobucket.com/albums/ac318/ITSGDYALL/TSOP2.jpg)
you just have to put just a little bit of solder to those two points there then use HexEn to flash the bios i used Xecuter2 4981.06 and it worked out fine (IMG:style_emoticons/default/happy.gif)
ps on the image it says 1.2 but its the same to 1.2 to 1.5 also if its winbond you have to choose winbond flash normally 1.4 and 1.5 are winbond

This post has been edited by BuraddoX: Mar 11 2011, 01:53 AM
Title: 1.4 Tsop Flash
Post by: spliff721 on March 10, 2011, 06:59:00 PM
TSOP flash is done, i put IND-BIOS.5003 on it with HeXEn. works lke a charm.

i want to edit, or rather delete the start up sequence. how do i go about doing this?
Title: 1.4 Tsop Flash
Post by: Heimdall on March 10, 2011, 07:13:00 PM
Edit C:\ind-bios.cfg to get rid of the options you don't want. The line you should start with is:

INTRO=1

but you should experiment with others as well.

Just make sure you don't change the lines:

DEFAULTXBE=\Device\CdRom0\default.xbe
AUTOLOADDVD=1

because they're the lines that allow you to boot from DVD if anything goes wrong.
Title: 1.4 Tsop Flash
Post by: BuraddoX on March 10, 2011, 11:11:00 PM
QUOTE(spliff721 @ Mar 11 2011, 02:59 AM) View Post

TSOP flash is done, i put IND-BIOS.5003 on it with HeXEn. works lke a charm.

i want to edit, or rather delete the start up sequence. how do i go about doing this?

im glad to here that i knew you could TSOP its just as simple as softmodding happy.gif i was wondering about the xbox logo boot screen can i remove it cause i have flashed the bios ? or is that what you were asking spliff
Title: 1.4 Tsop Flash
Post by: spliff721 on March 11, 2011, 10:01:00 AM
yes, with some bios, you can edit, change, and or remove the flubber screen and sound when the xbox starts up.
i imagine that it would greatly depend on what bios you use. but if your using IND-BIOS.5003, you can follow heimdalls post above to edit stuff.
Title: 1.4 Tsop Flash
Post by: spliff721 on March 11, 2011, 10:39:00 AM
just found this page of cool Bios editing software, most notable is xbox color preset maker it allows you to change the colors of your flubber screen and whatnot. cool stuff.
Title: 1.4 Tsop Flash
Post by: BuraddoX on March 11, 2011, 03:28:00 PM
QUOTE(spliff721 @ Mar 11 2011, 06:39 PM) View Post

just found this page of cool Bios editing software, most notable is xbox color preset maker it allows you to change the colors of your flubber screen and whatnot. cool stuff.

that's cool spliff thanks for that but i couldn't found my bios editor to just edit the ini i guess i will just manually edit it. happy.gif
ps spliff you should include all your modded xboxs in your sig happy.gif