Post by: sidocious on October 13, 2006, 10:50:00 AM
Is there anyone, who met 1.0 MOBO, what was painted with green paint on many places on motherboard?
I try to chipping it, and flashing, but not work. Is it 'debug' MOBO?
Please help, if you have any information about it.
Another problem is, I don't have the HDD waht was released with it.
Post by: cobrin on October 14, 2006, 08:36:00 AM
I know u dont have a HDD. Can you tell us what bios chip is on it?
Also if it is just the motherboard then REMEMBER you need the correct version of the power supply for the M/B
You cant just add any'ol PSU to it.
Tell us some more
Post by: sidocious on October 15, 2006, 12:32:00 AM
so. yes, all of xbox mobo are green. but it is a green mobo with GREEN PAINTED on some places. DVD socket and HDD socket painted some places too. It is "signed for" anything, but I don't know why.
Usually I can flash or chipping an 1.0 xbox everytime, but this one I can't.
Post by: SNAAAKE on October 15, 2006, 03:47:00 AM
Post by: sidocious on October 15, 2006, 08:08:00 AM
QUOTE(SNAAAKE @ Oct 15 2006, 11:54 AM) 
look like spray paint to me. whoever you bought it from was painting a case or something and put some there. whats the name of the tsop chip ? I dont think there is any "debug board" or anything. if you dont have the stock drive, I'd say you try installing a chip and make sure all wires are soldered properly.
okay, maybe there aren't any debug mobo
BUT!
My friend and I try to to chipping same as this, but never worked. All wires were correct, chip worked any other xboxes. But not in this type of xbox...
TSOP is ST type. I know, I can flash it. but...
Post by: Joshatdot on October 16, 2006, 03:27:00 PM
Post by: Pikkon on October 18, 2006, 06:05:00 AM
.
Post by: sidocious on October 23, 2006, 11:29:00 AM
another problem, I don't have the retail HDD, and I can't make a softmod on it and flash...
Post by: Pikkon on October 24, 2006, 06:43:00 AM
MCPX X2 or MCPX X3
Post by: sidocious on October 24, 2006, 10:23:00 AM
another answer: I got some video signal, I see normal boot sequence, but it is end with call service pic, but there aren't any code of error...
Post by: sidocious on October 25, 2006, 12:13:00 PM
QUOTE(JrracinFan8 @ Oct 24 2006, 11:10 PM)
I am pretty positive it is kernel revision 3944, which doesnt show any error codes. When you do install a chip do you get a frag or just doesnt respond to the chip at all like its not even installed?
a video about boot sequence
video without chip!
I put a chip in it, but than not booting, I think I got a frag...
Post by: sidocious on October 26, 2006, 08:55:00 AM
I think, I try to build an EEPROM reader...