xboxscene.org forums

OG Xbox Forums => Modchip Forums => TSOP flashing => Topic started by: painkiller on November 29, 2003, 06:05:00 AM

Title: 007 With Evox Or 007 With Raincoat
Post by: painkiller on November 29, 2003, 06:05:00 AM

I want to flash my tsop with the following details.

I have a v1.5 and

I want to solder only the two points on top of the MOBO.

I have a W49F020T-90B Bios and this one is 256Kb

I want to flash it with bios X2 4979.06_256k.bin from the repack release

I want to use 007 with evox installer.

I have edit the lines in my evox.ini

ROM = "X2 4979.06",0x50fe679cbf3882aba9f7bd3d812b7f51
ROM = "X2 4979.06",0x56be0f0146d1a69c0f1e6fa9a9558394 #Repack
ROM = "X2 4979.67",0xf85d1d778ee80a3a9b5f57e4dedd13d3

Flash = 0xda0b,"Winbond - W49F002U",0x40000
Flash = 0xda8c,"Winbond - W29f020",0x40000
Flash = 0x0900,"Winbond - W49F020T",0x40000

Bios is in bios directory.

Savegame is on memory stick.

Is it save for me to flash it with 007Evox ? I spended the last three hours on reading and i became unsure about the 007 with Evox. Instead of that using raincoat ?

Can anybody help me

Greetz

Title: 007 With Evox Or 007 With Raincoat
Post by: xbox junkie on November 29, 2003, 08:15:00 AM

i used raincoat for anything except this one odd xbox i got my hands on. it was a 1.4 or 1.5 i had the newest raincoat and everything but it wouldnt flash for crap so i downloaded the 007 evox installer and ran it and it worked fine. odd. i didnt install evox off there of corse if just flashed then rebooted and stuck in 2.5 slayers

Title: 007 With Evox Or 007 With Raincoat
Post by: DexterWard on November 29, 2003, 08:20:00 AM

I read that evox do not handle winbond ship correctly. I used raincoat to flash mine (1.4 box and winbond flashrom).

Title: 007 With Evox Or 007 With Raincoat
Post by: painkiller on November 29, 2003, 09:09:00 AM

Tried to flash with evox BUT hang when you get the status bar erasing bios.
Crossed my fingers and rebooted, luckely bios was not erased!!!!

What is the problem ?
I only solderded the two jumpers on top of the MOBO ! Is that enough or are they not solderd good or must i solder the jumper on bottom of the MOBO for erasing the bios ?

Or else is evox not working and must i try raincoat..?

Please advice, i dont know it anymore!!!

Greetz

Title: 007 With Evox Or 007 With Raincoat
Post by: xbox junkie on November 29, 2003, 11:34:00 AM

if its a tsop winbond chip u must use raincoat the evox installer i used on a hynix chip

Title: 007 With Evox Or 007 With Raincoat
Post by: Neo_Da_One on November 29, 2003, 11:56:00 AM

same version xbox but soldered 3 points chicken to go for the next steps but hey i did read that the M7 bios works for tsop and the others might kill ur bios

read it here ...

Title: 007 With Evox Or 007 With Raincoat
Post by: jesistehsux on November 29, 2003, 11:08:00 AM

QUOTE (painkiller @ Nov 29 2003, 04:59 PM)

Use raincoat, make sure all the jumper points are connected. They are the same points as seen on a 1.3/1.4 if i'm not mistaken.

Title: 007 With Evox Or 007 With Raincoat
Post by: painkiller on November 29, 2003, 12:04:00 PM

QUOTE (Neo_Da_One @ Nov 29 2003, 09:56 PM)

and ?? ne luck
iam gonna do it as well

same version xbox but soldered 3 points chicken to go for the next steps but hey i did read that the M7 bios works for tsop and the others might kill ur bios

read it here ...

No no wait read more i flashed a v1.1 with M7 and it was a bad flash red light!!
I heard that the x2 repack is better.

I think i solder the jumper on the bottem and try it with raincoat.

Title: 007 With Evox Or 007 With Raincoat
Post by: Neo_Da_One on November 29, 2003, 01:56:00 PM

and do u still have chance to reflash it after a bad bios and red light

i thought it dies then

Title: 007 With Evox Or 007 With Raincoat
Post by: GiggyNiggy on November 29, 2003, 05:53:00 PM

Just save the time and effort..use Raincoat for all...Never had a prob with it at all

Giggy

Title: 007 With Evox Or 007 With Raincoat
Post by: lordvader129 on November 29, 2003, 08:33:00 PM

M7 and 4979 work on ALL versions of xbox

evox will NOT flash a winbond chip

Title: 007 With Evox Or 007 With Raincoat
Post by: painkiller on November 29, 2003, 11:16:00 PM

QUOTE (Neo_Da_One @ Nov 29 2003, 11:56 PM)

but u said u had a 1.5 :blink:
and do u still have chance to reflash it after a bad bios and red light :huh: i thought it dies then :unsure:

I have a 1.5. in the past i had a 1.1. About three days ago. I only can fix the 1.1 with a MOD chip, but i couldn't wait for it. I bought another xbox and that happens to be a1.5 :beer:

Title: 007 With Evox Or 007 With Raincoat
Post by: bborski on November 30, 2003, 12:25:00 AM

QUOTE (GiggyNiggy @ Nov 29 2003, 07:53 PM)

Just save the time and effort..use Raincoat for all...Never had a prob with it at all

Giggy

I whole heartedly agree, ive never had any problems with raincoat either

Title: 007 With Evox Or 007 With Raincoat
Post by: painkiller on December 01, 2003, 10:10:00 AM

QUOTE (painkiller @ Nov 29 2003, 04:59 PM)

I finally did it. I used raincoat + 0.5, soldered the two points on top of mobo.
Used x2 4979.06 #repack 256kb bin file.