xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: jam013200 on December 09, 2005, 08:53:00 PM

Title: Sp.ice On A 1.1
Post by: jam013200 on December 09, 2005, 08:53:00 PM
I do not use the rivets since I found that during one install with the rivets it was causing poor contact with the pogo pins....I dont know why but when I removed them it worked great.

Are you sure you have the D0 wire connected properly? This can sometimes be confusing on exactly where to insert the wire. The adapter is more straight forward due to the screw securing it in place where it needs to be. I would double check the D0 and try again.

As for the adapter? Can you provide pictures?
Title: Sp.ice On A 1.1
Post by: firiebob on December 09, 2005, 11:07:00 PM
Here is a picture of the addaptor fitted.

IPB Image
Title: Sp.ice On A 1.1
Post by: firiebob on December 10, 2005, 04:31:00 PM
Hi,
Just an update, Rabid1 got back to me from TeamXodus, the problem is my adaptor.
Have a merry Xmas,
Bob.
Title: Sp.ice On A 1.1
Post by: jam013200 on December 11, 2005, 03:47:00 PM
Glad you were able to find your problem.....good luck on the ret of the setup!