xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: thebroken on May 25, 2005, 11:53:00 AM

Title: Newb About To Install S.p.ice Chip
Post by: thebroken on May 25, 2005, 11:53:00 AM: answers to questions...

1.) easy as long as you follow the manual
2.) you have to have you xbox and pc networked via a router and ethernet cord and flashing is easy you simply select the item off the xbox HDD
3) yes i did download the bios and dashboards off the internet
try this tutorial #xbins]#xbins[/URL]
4. i have installed quite a few SPices for friends tho i prefer solder but if you dont the SPice is very easy to use and i wish you the best of luck and if it doesnt work ill be glad to reply to the forum post

also congrats to you you made my signature

thebroken
Title: Newb About To Install S.p.ice Chip
Post by: ModdingManiac on May 25, 2005, 11:55:00 AM: 1. Its supposed to be but there are always people who have problems with it
2. Its easy, you just need a router or crossover cable
3. Yes, from usual places like "Xbins"..there is a guide on the tutorials section on
how to access xbins
4. If you take your time its easy, if your to scare then have a professional do it
Title: Newb About To Install S.p.ice Chip
Post by: acemilo on May 25, 2005, 01:06:00 PM: If you are scared to do it and have never done a mod before, I'd suggest sending it out to be modded. If you look on the installers board you should be able to find someone in your area to do the mod. Plus, with a solderless install, you will probably have trouble alligning it if you have never done it before, and a professional will solder it in for good and probably set up your hd and even upgrade it so you won't have to do anything.
Title: Newb About To Install S.p.ice Chip
Post by: Tiger1329 on May 25, 2005, 05:43:00 PM: What isa crossover cable not sure Ihave a router.....Is Cat5 a crossover cable?
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 25, 2005, 05:54:00 PM: QUOTE(Tiger1329 @ May 25 2005, 07:54 PM)
What isa crossover cable not sure Ihave a router.....Is Cat5 a crossover cable?
Title: Newb About To Install S.p.ice Chip
Post by: Elf_Sniper on May 25, 2005, 06:50:00 PM: Really you shouldn't be scared of soldering...just practice with small things to get your precision down.

The hardest thing about modding an XBox is using common sense.

Remember things like
1) If it doesn't fit, DON'T JAM IT
2) If it doesn't work, don't throw it across the room
3) It's not a good idea to keep a hot soldering iron on the motherboard for more than 2 seconds
4) Don't grab the soldering iron by the tip...

Other than this, follow the directions and you'll be okay
Title: Newb About To Install S.p.ice Chip
Post by: acemilo on May 25, 2005, 08:05:00 PM: QUOTE
4) Don't grab the soldering iron by the tip...

LMAO, really why not?
Title: Newb About To Install S.p.ice Chip
Post by: Tiger1329 on May 25, 2005, 08:56:00 PM: found the installers forum...srry should have looked first
Title: Newb About To Install S.p.ice Chip
Post by: thebroken on May 26, 2005, 06:44:00 AM: ok xbins tut link 2

http://www.xbox-scen...icles/xbins.php

copy and paste into internet browser
Title: Newb About To Install S.p.ice Chip
Post by: Tiger1329 on May 27, 2005, 11:35:00 AM: Ok I got the chip today.,...Xbox is apart very easy... First problem No instructions came with the S.P.Ice chip The only ones Ive found online to this point are the 1.6 instructions my Xbox is apparently not a 1.6 because the clear plastic guide has no chip to go around...I am confused Is there a S.P.Ice guide? for xbox 1.4/1,5? and why didnt the chip come with instructions.....Help please
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 27, 2005, 01:21:00 PM: Just follow the old solderless guide:

http://www.teamxodus...op=getit&lid=33

...you don't use the guide or the white PCB part on a non-1.6. just the back base
Title: Newb About To Install S.p.ice Chip
Post by: Tiger1329 on May 27, 2005, 01:38:00 PM: Thanks for that go it..... Having trouble with one more point as my luck would have it I think my Xbox is 1.5. I have the chip in and it turns green ok good....os booted up....good again....loaded the retail bios onto the chip booted it and it frags... Says i need to install another D0 if my xbox is 1.5 Ifound the wire having very hard time locating the second d0 I am using the noob manual but still cant see it......any help would be appreciated....
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 27, 2005, 02:34:00 PM: (Plus, if you did, it wouldn't be booting to the xenium os )

So.. xbox frags when you boot the retail kernel.. do you get an error # on screen?
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 27, 2005, 03:20:00 PM: (check your cables, make sure the hdd is jumpered to CS)
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 27, 2005, 03:30:00 PM
Title: Newb About To Install S.p.ice Chip
Post by: appleguru on May 27, 2005, 04:38:00 PM: ...Unlocked stock HDDs are cheap