thats the thing, i can't get ftp to work. Does the xbox have to connected to a video source such as a tv for it to work? And what filemanager would you use ?
i used the slayers disk on my xbox and i did a full install, but it didn't do a full install. I tried it several times, so i don't have any file managers. I only have dvd2xbox.
dvd2xbox might have a filemanager built in, I can't remember.. In any case, it is honestly in your best interest to get FTP working. How are you connecting your xbox to your PC? If it's directly connected, are you using a crossover cable an a static IP? If it's going through a router, are you using a dynamic IP (DHCP) and a patch cord? Do you know what the xbox's IP is?
i tried ftping again and i can't get it to work at all!!
QUOTE(spyman007 @ May 11 2005, 03:02 PM)
i tried ftping again and i can't get it to work at all!!
ok maybe i'm not doing it right. I got connected then it like searches the hard drive or something than disconnects. How exactly fo you ftp? I have a cable modem and a crossover cable. Now what do i do?
Unplug the modem and plug the crossover cable into your PC and your xbox.
the modem is usb, the crossover cable is a cat-5 right?
edit: where do i plug it into my pc?
ok i pluged my crossover cable into the back of the xbox and into my computer's ethernet port. Is this the correct way to do it? I am using FlashFXP. It gets connected and after about 2 mins it then says connection failed(connection timed out). what is wrong?????
ok after some searching what i have is a cat 5 patch cable. Is this not the correct cable to use. If not can't you just switch some wires?
QUOTE(spyman007 @ May 14 2005, 03:22 PM)
ok i pluged my crossover cable into the back of the xbox and into my computer's ethernet port. Is this the correct way to do it? I am using FlashFXP. It gets connected and after about 2 mins it then says connection failed(connection timed out). what is wrong?????
yea i know that know, what is the easiest way to switch the wires without cutting the end off?
i don't want to , i like to do stuff like that instead of going to buy one.
ok i'll try this but it seems to difficult, any eaiser ideas?
Silentscream__
^ ok i made the cable w/ the instructions you gave me and it still does not work. Also why do i have to change the ip to static and the number?
also i got into the properties and i have three connections: 1394 connection, local area connection , and local area connection 2.
there is no ip for the first one, the second one the ip is 192.168.0.1, and the third one the ip is 65.190.19.130 - and appearantly my commputer is using all three connections. I have cable internet( road runner) There is no subnet mask for the first one, the second subnet mask is the one you gave me, and the third is 255.255.248.0
ok what is wrong, will some one please help me!!!!!!!
ok, it works now!!!!!! Now how do i transfer the skins???
ok now it is doing the same thing as before, disconnecting or not getting a connection. the folders showed up and they were all empty what is wrong?
1394 connection?! Do you happen to have a mac? heh...
Anyways, disable "Show all/hidden files" And you should see the files in those folders.. (Or you can use SMB instead and not worry about it).
no i don't have a mac.