xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: ltoolio on November 17, 2004, 03:19:00 PM

Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: ltoolio on November 17, 2004, 03:19:00 PM
Two things:

1.  Have you tried updating via CDRW in recovery mode.
2.  (and I'm not 100% sure of this one)did you solder the additional points necessary for the V1.5. it is mentioned on page 22 of the IceGuide by cap269?
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: joker81 on November 18, 2004, 11:36:00 PM
I was reading the install manual and for the v1.5 you have to do extra things to it. So maybe thats the problem im not sure tho.
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: rd350ypvs on November 19, 2004, 02:58:00 AM
you need 2 additional points, 3.3v and ground when using a 1.5 xbox






andyw
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: appleguru on November 19, 2004, 05:20:00 AM
wink.gif It's most likely a 1.4...

Anyways, try a different controller if you can find one, and as ltoolio said, try updating to XOS 2.0.1.
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: fricfrac on November 21, 2004, 08:13:00 AM
Bump!
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: anticrap1234 on November 21, 2004, 11:23:00 AM
well use arrows to scroll not joystick. And if u installed the little pins under the solderless adapter take them out all i did is place in do point press adapter ino hole screw in. But to boot u need to set up tsop. Maybe ur chip is screwed talk to seller
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: appleguru on November 21, 2004, 01:37:00 PM
No, your chip is fine. As anticrap1234 suggested, be sure you're using the d-pad arrows and not they joystick 8-)
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: appleguru on November 21, 2004, 03:23:00 PM
Well, try using the webinterface to add/boot a bios and see if that works... if it does, then it's definitely your controller(s), if it doesn't then it's likely your install or xbox...
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: appleguru on December 11, 2004, 11:38:00 PM
QUOTE (erickpro @ Dec 12 2004, 12:56 AM)
Guys, no one anwsers my question, please, How do you flash the bios with xenium os v2.1 ???   Believe me, I have searched so many times and i still cannot find an answer.

The worse part is that I cant even go back to V1.1 because for some reason when i put the DVD in, it says GOT FROM CD then it just goes to a yellow screen and the eject button lights flash green and red.

What is up??? ph34r.gif

Must we post this in every topic? Jeesh man, once is enough cool.gif Anyways, I replied to you here:

http://forums.xbox-s...dpost&p=2092277
Title: Ice Chip Boot's To Main Menu Then Nothing
Post by: Silentscream__ on December 12, 2004, 11:19:00 AM
I had the exact same problem, just updated to 2.01 and everything works fine.