xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: TOKA_Mods on July 22, 2004, 04:33:00 PM

Title: Solderless Adapter?!?
Post by: TOKA_Mods on July 22, 2004, 04:33:00 PM
smile.gif
Title: Solderless Adapter?!?
Post by: dustwel on July 22, 2004, 06:04:00 PM
I had the same problem, it's very frustrating.

You need to apply pressure down on your chip in order to get it to touch right and work. I read somewhere that a guy stacked 8 pieces of cardboard taped together and used the weight of the CD ROM to hold down the chip in place.. and my bud tried it last night with his and it worked.

These blue solderless adapters are junk :/
Title: Solderless Adapter?!?
Post by: silentsnake on July 22, 2004, 06:09:00 PM
OHHHH the 1 million I have solder in my v1.o box HELP !! Push it down hard with a paprer trick to get good contact.
Title: Solderless Adapter?!?
Post by: silentsnake on July 22, 2004, 09:43:00 PM
i don't like desoldering irons, i prefer braids.
Title: Solderless Adapter?!?
Post by: carlosian on July 23, 2004, 11:05:00 PM
QUOTE (carmoniousmonk @ Jul 23 2004, 05:40 AM)
I bought a desoldering iron from shit shack (cheap! 10~) heat  the lpc from the bottom with a regu;ar shit shack iron. once the solder is wet,

which desoldering iron did you buy from radio$h*t?  was it this one?


http://www.radioshac.....ct_id=64-2060

if so, how did you use it?  i've tried and tried and haven't been able to take the solder off.


Title: Solderless Adapter?!?
Post by: Mister694 on July 24, 2004, 01:20:00 PM
FYI.... My 1.1 has solder in the lpc points also.... Desoldering braid worked in my case and i soldered the bitch(Xenium) in.... first time soldering and i did it in 5 min :-)  Screw the solderless way....been there done that :-(
Title: Solderless Adapter?!?
Post by: hogrider on July 24, 2004, 07:30:00 PM
Mine didn't work at first, then I took a razor blade and scraped at the solder points carefully and used the paper trick (actually used thin cardboard) under the screw and IT WORKED!
Title: Solderless Adapter?!?
Post by: cap269 on July 24, 2004, 07:39:00 PM
I've seen quite a few 1.1s with solder in the LPC holes
Title: Solderless Adapter?!?
Post by: thechitowncubs on July 25, 2004, 08:39:00 PM
biggrin.gif  They will probably do it in under a minute.