xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: animex2 on July 08, 2004, 11:00:00 AM

Title: Xenium And 1.6
Post by: animex2 on July 08, 2004, 11:00:00 AM

Hey, Is it possible to install a normal Xenium and have it working on a xbox version 1.6? Thanks =)

Also, are there any extra steps with a Xenium or a Xenium ICE on a 1.6?

Title: Xenium And 1.6
Post by: MadCraiZ on July 08, 2004, 11:17:00 AM

from what i've red, they are the same...except the ice is painted white and comes with the new x3 os.

Title: Xenium And 1.6
Post by: TSOPrano on July 08, 2004, 02:42:00 PM

if following the instructions do no work, ground the LFRAME instead of connecting to the d0 on your chip.

you wont be able to switch to tsop but it will work.

Title: Xenium And 1.6
Post by: animex2 on July 08, 2004, 02:45:00 PM

Alright, so it works with the 1.1 OS?

Title: Xenium And 1.6
Post by: silentsnake on July 08, 2004, 03:17:00 PM

the OS should effect it working on a 1.6 I don't think.

Title: Xenium And 1.6
Post by: bucko on July 08, 2004, 03:23:00 PM

You need OS2 (currently beta) to have 1.6 support.

Title: Xenium And 1.6
Post by: silentsnake on July 08, 2004, 03:29:00 PM

and evox m8 as your bios for video correct ?

Title: Xenium And 1.6
Post by: Song on July 08, 2004, 09:00:00 PM

Credit go to TSOPrano For the LFRAME To the Ground Instead to D0 on the chip.

Title: Xenium And 1.6
Post by: xboxstone on July 08, 2004, 09:13:00 PM

I just put a Xenium with OS2 flashed with M8 in a 1.6 Xbox.

After doing all the soldering using the pics for the 1.6 diagram provided by  Team OzXodus it still wouldn’t boot properly ( Got a red light but nothing else ) The guys in the OzXodus forum recommended soldering the D0 on the motherboard directly  to a ground on the Motherboard, not the Xenium. Just did it a few hours ago and it worked Fine. Hope this helps for thoes of you still having problems.