xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: EmperorPsiblade on April 23, 2004, 05:11:00 PM

Title: What Happened?
Post by: EmperorPsiblade on April 23, 2004, 05:11:00 PM
check your motherboard connections.... a loose controller port connection casues this prob in XOS v1

Also check the d0...
Title: What Happened?
Post by: Flagg3 on April 23, 2004, 05:16:00 PM
Before doing all of that,  plug in a MS controller into port 1 and leave everything else unplugged.  

If you have the original Xenium OS, it has problems booting with certain controller combinations.  

If this fixes the problem for you then you can resolve it permanantly by upgrading to Xenium OS 1.1 or 2.0

Flagg
Title: What Happened?
Post by: EmperorPsiblade on April 23, 2004, 05:18:00 PM
QUOTE (SilentKilla @ Apr 23 2004, 08:14 PM)
damnit i was hoping u werent gonna say that

why?

ph34r.gif
Title: What Happened?
Post by: EmperorPsiblade on April 23, 2004, 05:32:00 PM
NOTE: that is the wrong answer to my question....

Just kidding... i'll help with any questions as long as you read some tutorials first...
Title: What Happened?
Post by: cap269 on April 23, 2004, 07:33:00 PM
I would first contact the "some guy" you got your premod from ... may have a warranty issue.  My premods all come with a 1 year defect warranty.
Title: What Happened?
Post by: fujitech on April 24, 2004, 10:28:00 PM
It was found that bad soldering or wire installation produces ground bounce
i.e. noise in fast switching circutry.

This causes the xenium to stall at the Xenium splash at boot up!
I read it was a premodded xbox but u never know!