xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: fujitech on April 22, 2004, 07:31:00 AM

Title: I Think My Chip Died!
Post by: fujitech on April 22, 2004, 07:31:00 AM
check yr GND
PIN 2

U can use a multimeter to test for continuity the ground solderpad for quicksolder
and any ground point on the motherboard!
Title: I Think My Chip Died!
Post by: Master-Chief on April 22, 2004, 12:45:00 PM
wink.gif
Title: I Think My Chip Died!
Post by: EmperorPsiblade on April 22, 2004, 01:15:00 PM
ya check the ground and the power...
Title: I Think My Chip Died!
Post by: EmperorPsiblade on April 22, 2004, 03:06:00 PM
wink.gif

probably a dry joint...
Title: I Think My Chip Died!
Post by: Master-Chief on April 22, 2004, 03:11:00 PM
QUOTE (EmperorPsiblade @ Apr 22 2004, 07:06 PM)
Master chief is confused.....

its an lpc problem if there isn't any POWER getting to the chip  wink.gif

probably a dry joint...

I think I have a dry joint but I can still load Xenium OS and Recovery Mode...

It's just that when the Xbox is cool, it won't load X2 BIOS!  sad.gif
Title: I Think My Chip Died!
Post by: EmperorPsiblade on April 22, 2004, 03:14:00 PM
i recommend sacrificing a goat to ward off the evil M$ spirits from your Xbox....
Title: I Think My Chip Died!
Post by: EmperorPsiblade on April 22, 2004, 03:51:00 PM
led should be on... resolder the lpc.. thats the bus the Xenium is on.... you have a pin header install right?
Title: I Think My Chip Died!
Post by: EmperorPsiblade on April 22, 2004, 04:04:00 PM
chip may be fried... i dunno... ask on #OzXodus
Title: I Think My Chip Died!
Post by: markav28 on April 24, 2004, 10:27:00 AM
Today, I resoldered everythign for the fourth time, and to my amazement, it now works perfectly!!!  Thanks for the advice guys! And to anyone who has a similar problem, all I can say is check and re-check all your solder points very carefully!