xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: xboxhackcrack on March 16, 2004, 12:43:00 PM

Title: Problems Everywhere
Post by: xboxhackcrack on March 16, 2004, 12:43:00 PM

If it helps, I got a v 1.1 xbox

Title: Problems Everywhere
Post by: xboxhackcrack on March 16, 2004, 01:29:00 PM

ok I finally got it to work. LPC points were the problem. Now my only problem is flashing. Backed up my eeprom already though. When I try flashing evox I get the Bios not proporly sized.

Title: Problems Everywhere
Post by: arjkar on March 16, 2004, 06:42:00 PM

what he said^ and do u burn @ 1x and on 'never used' CDRWs, you should also add a large buffer file maybe 650mb if u got a 700mb disc.  These things may not make a difference but u can try them.  Also I heard Memorex 4x (again burned @ 1x speed though) works well? Do you know what drive or version your xbox is?

Title: Problems Everywhere
Post by: RxGuy on March 16, 2004, 07:26:00 PM

QUOTE

When I try flashing evox I get the Bios not proporly sized

I ran into this same problem tonight, but I found out that I all I needed to do was rename the file to BIOS.BIN.  My previous file had been something like EVOX_M7.BIN

Hope this helps

Title: Problems Everywhere
Post by: Jaego on March 16, 2004, 08:11:00 PM

QUOTE (RxGuy @ Mar 17 2004, 05:26 AM)

QUOTE When I try flashing evox I get the Bios not proporly sized I ran into this same problem tonight, but I found out that I all I needed to do was rename the file to BIOS.BIN.  My previous file had been something like EVOX_M7.BIN Hope this helps

All 'official' bioses from the 'usual places' are all named bios.bin when extracted.  You shouldn't get your bioses from anywhere else!

Title: Problems Everywhere
Post by: xboxhackcrack on March 17, 2004, 03:32:00 AM

ok I dont have time now, but in the afternoon I will put the dummy file, default.xbe, evox.ini, and skins into the same folder. I will make it to an iso. I will rename the iso to BIOS.BIN. I will use nero burning ROM and burn the image to a fresh cd-rw slowest write speed it will let me use is 4x. Write method will be disk at once/96 and buffer underrun protection will be on.

Does this seem correct?

Title: Problems Everywhere
Post by: jordib on March 17, 2004, 05:02:00 AM

xboxhackcrack,
Be sure to read the "Creating a Bios CD Manual" on the Ozxodus site.  

As Mr Nobody stated, it sounds like you are trying to load a dash instead of a bios.  You have to load a proper bios before loading a dashboard.

Title: Problems Everywhere
Post by: xboxhackcrack on March 17, 2004, 11:27:00 AM

what is a name of a bios so I can actually figure out what I am looking for. Do I want to download OzXFlash 1.2.3 from the Xenium website?

Title: Problems Everywhere
Post by: jordib on March 17, 2004, 03:58:00 PM

Do not use OzXflash.  The Xenium has flashing capabilities built-in.  

The bios I used was named EvoxM7.bin, but this has to be renamed BIOS.BIN when you burn the CD.