xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: nubert on March 05, 2004, 10:53:00 AM

Title: Help - Xenium Flashes Red
Post by: nubert on March 05, 2004, 10:53:00 AM

Hi there

I am THAT friend and here's some more information -

I have a xbox version1.0 (old school)
And when I try booting up, the front flashes green briefly, shuts down, repeats that once again, and then the third time, I get FRAG until I turn it off. And all the while, the xenium LED is a solid red. Also, the hard drive beeps as it shuts down during the green flashes.

And ideas?

Thanks

Title: Help - Xenium Flashes Red
Post by: indiggio on March 06, 2004, 01:28:00 PM

Help,

I'm in the same boat.  I've check the PIN header and solders appear to be fine.

Is there anything else that can be checked?  Any way to VERIFY the solders beyond visual?

Title: Help - Xenium Flashes Red
Post by: arjkar on March 06, 2004, 02:12:00 PM

check the d0 point, use a multimeter on all points check for connection / bridging (between lpc points, and between soldered pts and motherboard)

Title: Help - Xenium Flashes Red
Post by: erexx on March 06, 2004, 05:39:00 PM

Make sure all the cables are connected, including video.

LPC Trouble Shooting
http://www.xbox-scen...es/lpc-diag.php

Meanings of Red/Orange/Green flashing leds on Xbox.
http://www.xbox-scen...ticles/leds.php

Troubleshooting in general:
http://www.xbox-scen...0,0,0,0,0,0,0,1

Title: Help - Xenium Flashes Red
Post by: Josh Adams on March 06, 2004, 11:53:00 PM

Don't worry about the d0 point as it will be fine. (Otherwise you wouldnt get a FRAG)

Resolder your LPC though.