xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xodus Chips (Xenium) => Topic started by: arjkar on January 22, 2004, 02:38:00 PM

Title: Xenium And Progressive Scan Ui
Post by: arjkar on January 22, 2004, 02:38:00 PM
I believe the disabling/enabling for Xenium is done via the OS (on-screen software switch).
Title: Xenium And Progressive Scan Ui
Post by: JesseWHHS on January 22, 2004, 03:11:00 PM
biggrin.gif  biggrin.gif

If u cant see screen, u will have sum big problems swichting chip on/off.

Hope u get this fixed. L8er
Title: Xenium And Progressive Scan Ui
Post by: randman on January 22, 2004, 04:04:00 PM
Thanks for the replies. Just to let you know, when I put this thing on RCA outs, I could see the UI. I understand that you can boot to the MS original dash as an option, but no one can definitively tell me if it disables the chip to where XBOX Live cannot detect it., and no one wants to try and risk being banned.

I cannot beleive that they did not make this UI Progressive Scan enabled. X2VGA and HDTVs are very popular options right now. As it is, with my X2VGA connected, I have to guess at when to boot into Evox since I cannot see a damm thing.

Once it boots into Evox, everything works fine from there.
Title: Xenium And Progressive Scan Ui
Post by: Josh Adams on January 22, 2004, 04:34:00 PM
randman, read this http://forums.xbox-s...T&f=67&t=158281

It has some answers about HDTV compatibility for focus chipset.
Title: Xenium And Progressive Scan Ui
Post by: Josh Adams on January 22, 2004, 04:38:00 PM
Selecting the Original Bios does disable the chip so you can use Xbox Live.

Once the quickstart settings are configured it wouldnt even matter if you couldnt see the screen anyway.