xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Xecuter Chips (Xecuter1, Xecuter2 & Xecuter3) => Topic started by: steveo1978 on May 15, 2013, 09:13:00 PM

Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 15, 2013, 09:13:00 PM
Try to touch up all the other solder spots and see if that helps.
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 16, 2013, 01:24:00 AM
ok just did that. they look fine. still no change. can the bios of the chip be reinstalled ?
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 16, 2013, 04:20:00 PM
What chip is it? If you are not sure post a picture of it
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 17, 2013, 10:43:00 AM
https://encrypted-tb...r7teEF_FXS-_oFA
i think its a xecuter C3 on the in side and a black selector on the front with 4 options and a flash protect.
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 17, 2013, 12:11:00 PM
try powering on by pressing the power and eject button at the same time
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 18, 2013, 12:06:00 AM
nothing happens when both are pressed at the same time. i think it should start up the chip menu but just does nothing.
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 18, 2013, 12:34:00 AM
Can you take a picture of the chip installed?
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 19, 2013, 10:10:00 AM
sorry my cameras not working (just my luck). its the same one in the pic i linked to. red chip rounded on one corner with a small knob that turns. black selector board on the front with 4 banks and a flash protect. again sorry for no pic.
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 20, 2013, 12:49:00 AM
QUOTE(dustyxbox @ May 19 2013, 10:36 PM) View Post

the dvd tray opens some times. can i place a disk with the chip os and get it working that way?

Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 21, 2013, 10:00:00 AM
If flashbios loads yes you can reflash the chip with a disc.

 The drive tray not always opening can be a simple fix. What model drive is it?
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 21, 2013, 02:04:00 PM
dont think the flashbois is loading. nothing comes on the screen.  it just does the three flash frag thing.

dvd drive is samsung SDG-605.



would it b ok to pm you my youtube info. i could show you the chip and the problem that way.
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 21, 2013, 02:09:00 PM
Search ebay for the 360 drive belts those should also work in that drive.

If you are in the US you can send me the xbox I wont charge any except return shipping.
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 21, 2013, 02:18:00 PM
that will work on a original xbox dvd drive? i have a not working spare. the lift points are broke off so the eye dont move up and down. i can just use that right, even if its not the same brand?


making a vid on the problem later.
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 21, 2013, 02:52:00 PM
yeah belt should work. I think the only model they do not work on is the Thompson drive for the xbox1. You can try the belt from that drive but it may already be worn and not work that great.
Title: Xecuter Chipped Box Not Working!
Post by: steveo1978 on May 22, 2013, 02:11:00 AM
yeah feel free to PM me
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 24, 2013, 01:16:00 AM
got the dvd drive working. took the belt from a spare the was the same.
Title: Xecuter Chipped Box Not Working!
Post by: dustyxbox on May 26, 2013, 12:00:00 AM
tried unplugging wires from the front and used factory power but did nothing. do u think the chip bios is gone.
Title: Xecuter Chipped Box Not Working!
Post by: shambles1980 on August 16, 2013, 07:17:00 AM
you have a 1.6 xbox if it had the +5v wire.
pull the mother board out and check the lpc rebuild points are all still good. also check the d0 point.
if it is solderless adapter then check all those stupid little legs are in the correct holes..

It sounds like a problem around the lpc (chip is not connected properly to the lpc, or the lpc rebuild has failed)
also did you solder the +5v to the correct leg of the transistor.