xboxscene.org forums
OG Xbox Forums => Modchip Forums => Team SpiderGX (SpiderGX, SpiderChip) => Topic started by: stirfry on January 05, 2006, 11:03:00 AM
-
I just got the Spider chip and installed it on an XBOX version 1.6a (getting the laquer off the mobo was a biotch, I broke the end of my needle off in one of the holes (IMG:style_emoticons/default/smile.gif) all the lights are lit and it boots to the Spider OS when I turn on the chip using the external board.
I used the Spider WebPage to flash bank 3 with the X2 5035 V1.6 bios (512k) from xbins.
I've tried setting the dip switches to auto-boot mode and setting SpiderOS to auto-boot bank 3
as well as setting the dip switches to boot from bank 3 and every time the XBOX just loads the SpiderOS screen.
I also tried the Evox bios in bank 1 and the Spider Test Bios in bank 2 with the same results, SpiderOS every time!!
I was thinking maybe the connection for the external on/off/dipswitch board may be loose so the position of the switches is not being detected? Is there a way to boot from a certain bank without the external connection being connected?
Thanks!
-
the only dip to set is the first one if you have autoboot set to bank 3 !
already installed a dashboard ?
but anyway you wont be able to launch any appz out of it your only able to play backup games from dvd.
-
--the only dip to set is the first one if you have autoboot set to bank 3 !
yes, I've tried that setting and the manual bank 3 dip switch setting
--already installed a dashboard?
no, I have only seen the SpiderOS boot screen so far, not even any black screens or such.
--but anyway you wont be able to launch any appz out of it your only able to play backup games from dvd.
I hope I can at least load XBMC, wholly crap, if not I will cry, or at least try to return the Spider with one leg cut off to diveno.
-
you have to set dip one and set auto boot to bank 3 thats all.
if this doesnt work send it back like many did, i think divineo will soon take this chip out of their program !
you wont be able to load xbmc very often cause your xbox will freeze (see stuck loading thread)
-
I have put two in my xbox's over hte years all have run fine until recently it seems anything i get from divineo.com seems to not work recently, a dms4pro and a spiderchip, though they dont like taking there products back when faulty either, im still waiten for a reply on my thread, as im dumb founded by this issue
-
I forgot to mention it is a Spider GX, not the original. I'll check what version the GX is, maybe I can upgrade the SpiderOS.
-
I had the same problem with only booting to the Spider OS. The directions I downloaded off the internet seem to be inaccurate for the DIP switch settings. The front panel PCB (the little board with the on/off switch) has a diagram with the DIP switch settings for the corresponding bank that you want. I changed mine as illustrated on the board A - Off, B - On, 3 - C - Off and this worked perfectly and in my case booted right to Slayers. Try this. I think it will work for you too.
-
it will boot to slayers yes.
but what then ? 50 % of the time you try to start an app your chip will hang.
cool ! i think they made shit with the spider bios OR none of todays bioses (x2,evox,...) fits the spiderGX.
so try to give it back , thats the best you can try. i was trying for 2 days to get it work right but my effort was bringing 50 % no-working-time to something around 40 %.
still not what spider promises you.