Print Page - Spider Gx Won't Turn On

OG Xbox Forums => Modchip Forums => Team SpiderGX (SpiderGX, SpiderChip) => Topic started by: smdtherock on December 07, 2005, 12:45:00 AM

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 07, 2005, 12:45:00 AM

ok so i have spent the last 3 hours trying to get this stupid chip to work...it frags when the chip is on and 4 leds light up...when its off...it works normal and 5 leds turn on....i checked my connections over and over again...can i solder the leg with solder to hole the d0 on?

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 07, 2005, 03:46:00 AM

go to www.HackDaBox.com click on Spider GX !

Soldering wont really help with the Spider GX , squeeze it in and if you get all 6 leds on ( one led on the SPider GX and 5 on the SpiderWire PCB ) with the chip turned off then the legs are inserted ok make sure the Spider GX is squeezed onto the lpc !

Use the X2 5035 V1.6 bios and put the edited x2config.ini on your E:\ drive you can grab it from here ...

Edited x2config.ini

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 07, 2005, 09:58:00 PM

QUOTE

Not Found
The requested URL /spiderGX.html was not found on this server.

Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
]

I tried last night...thats what i got just tried again and same thing

also why are all the leds turning on when the chip is disabled..? wouldn't that mean that there is a connection? maybe its something else i need to fiddle around with?

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 07, 2005, 11:06:00 PM

no edit button? well i just broke a damn leg so i am gunna have to go out and get some solder

i wihs i had read up on this chip before i purchased...there is no way to just solder everything>?

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 08, 2005, 06:46:00 AM

http://hackdabox.ete...t/SpiderGX.html

My website does get busy but it is working fine for me ??? Anyway try the mirror site posted above !

Soldering is not really possible with the Spider GX ... i guess you could remove all the pogo pins and solder on a pinheader and then solder wires on the motherboard for a LPC rebuild but it would be easier to buy another cheap chip and solder that in !

Try returning the chip and order a different chip if you can solder like the duox2 !

hackDaBox !

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 08, 2005, 12:30:00 PM

is soldering in a 1.6 xbox the same as when i did it way back with my x2? or has it gotten more complicated?>

thnx a lot too you're very helpful

also how is the x2.6ce lite with the xapter1.6? better then this junk i got?

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 08, 2005, 02:29:00 PM

Hell Yeah ! , Team Xecuter will give support for their products too !

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 08, 2005, 08:58:00 PM

ok so before i go spending more money..which is limited...i tried soldering the d0 to the back of the mobo....i still get the same thing..i don't need the leg in the front correct? or do i still attach that anyway? could it be something else? cause like i said before all lights turn on when chip is disabled...just the d0 missing when chip is enabled...i am so frustrated right now...

thnx for the help

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 10, 2005, 09:26:00 PM

QUOTE(smdtherock @ Dec 9 2005, 03:05 PM)

For the fact that it frags means your d0 is working !

It's the connection to the lpc that is bad , try pushing down firmly on the chip in different spots and turn on the box ( keep away from the power supply - leave the hard drive in the xbox but remove the dvd-rom and flip it so it's facing the wrong way around )

If it boots even once then your problem is poor lpc connection !

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 10, 2005, 09:54:00 PM

OK there are 5 leds on the SpiderWire PCB. With the Spider GX off you should have all 5 leds on. When you turn the chip on only 4 leds will be on. There is also a LED on the Spider GX itself so you will have 5 leds on in total out of 6 !

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: superfedexman on December 11, 2005, 09:18:00 AM

Dude I have the same freegin problem, I have spent a week on this board trying to find a fix. SpiderGx just sucks plain and simple. I am gunna try and exchange for the reliable Xenium ICE. I know cause I've installed them and they are a walk in the park compared to this piece of shit spiderGx.

Title: Spider Gx Won't Turn On
Post by: Bmx_rider on December 11, 2005, 10:04:00 AM

i cant exchange my chip, cuz i cut the pogo pins from it, and i bought it from the net. so i'm stuck with it.

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 11, 2005, 05:04:00 PM

QUOTE(Bmx_rider @ Dec 12 2005, 04:11 AM)

i cant exchange my chip, cuz i cut the pogo pins from it, and i bought it from the net. so i'm stuck with it.

If you cut the pogo pins , How is it making contact with the LPC port ?

Please email the pics to [email protected]

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: smdtherock on December 13, 2005, 01:52:00 PM

now that you have the lpc fix and i know that my d0 was making a good connection and i should be able to get it to work now. I have another problem...leg broke off...put it aside to solder back on, on one of my days off...now its gone...can i just use wire? if not what is an alternative to the spider wire legs?

Title: Spider Gx Won't Turn On
Post by: EricTheBum180 on December 22, 2005, 01:51:00 PM

Hey i have a new SpiderGX i bought it because i flashed my regular spiderchip wrong, i put in my spider and when its off the regular dashboard runs, when its on it turns on, off, on, off, on (because it was flashed wrong) so i am assuming that the chip is working exccept for the fact that i flashed it wrong. When i put my spiderGX in i can get the 5 lights on the pcb and 1 light in the GX chip it will run the normal ms dash when off but when on dose the same thing as my normal spiderchip (on, off, on, off, on) as if it were flashed wrong. I have 2 questions 1) where does the washer go for the screw on top of the chip or under it? 2) also the the 16mb on the chip is ROM correct? if so why do the put it in a box with a magnetic seal won't that fuck up the rom and erase it.

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 26, 2005, 05:39:00 AM

Hello There ...

The washer goes under the Spider GX ! Try this and your chip might now work !

Follow my install guide here ..

http://www.hackdabox.com/SpiderGX.html

Also thats 16 megabit ( 2 megabytes ROM - 1 meg usable by you ! ) and the case and magnets is one of the best features of the Spider GX !

I haven't herd of any chips not being flashed properly ! so i guess the magnets are safe !

Seriously you have to admit the packaging is awesome !

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 28, 2005, 07:41:00 AM

Buy the cheapest digital multimeter you can and set it to 20k ohmes. In the pic the dial needs to be turned 5 clicks to the left for the correct setting !

IPB Image

Remove the motherboard. Place one probe on a pogo pin and the other probe on the lpc hole on the back of the motherboard. Check every pogo pin. It should read 0 if it's making a good contact.

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: ISCE on December 29, 2005, 05:53:00 AM

I have the same problem:

All but one of the LEDs light up when the chip is turned on, and all light up when off. Never comes up into the Spider OS.

Xbox ver 1.0

It frags everytime after 3 tries. I've tried holding down the card multiple times and don't think it is a connection issue.

Anything else to try?

Thanks!

Title: Spider Gx Won't Turn On
Post by: Necrosaro420 on December 29, 2005, 04:47:00 PM

QUOTE(ISCE @ Dec 29 2005, 02:00 PM)

Having the EXACT same issue, but on a 1.6.

Title: Spider Gx Won't Turn On
Post by: undrgrndntw on December 29, 2005, 10:43:00 PM

This Chips A freaking Joke!! how are you supose to install this on v1.0 if the lights can hardly help you. The people at spidergx.com wont respond to emails, and the install guide is so hard to follow you might as well guess. On top of all of this their websites down today. Even if people try to help me, theres nothing they can really do except give me advice. This chip sucks!!!

Title: Spider Gx Won't Turn On
Post by: HackDaBox on December 30, 2005, 07:29:00 AM

Oh come on ...

Do i have to make a video of the install procedure ???

On a V1.0 - V1.5 you simply place the washer on the metal ring around the screw hole near the lpc area. Place the Spider GX on top of that and screw it down using the provided screw. Then you insert the green wire into the D0 via. The dip switch settings are shipped in the all on state which is perfect !

Boot the chip and flash your bios.

HackDaBox !

PS i do realize the V1.6 install is harder and has issues booting .XBE files but early models are easy !

Title: Spider Gx Won't Turn On
Post by: dizturbd on December 30, 2005, 01:03:00 PM

I tried for 2 1/2 hours last night trying to get mine to align. So far this chip sucks, but I am gonna keep trying to get it aligned. I am having a problem because there is a capacitor or something on the motherboard that I think is in the way. It keeps slipping forward and away from the contact points. I also think it might have something to do with having my lpc points all soldered in and very unevenly. Maybe if I can flatten them somehow I can get it to work. Overall, I am disappointed with this install procedure.

Title: Spider Gx Won't Turn On
Post by: dizturbd on December 30, 2005, 02:08:00 PM

I just tried installing on my other 1.0 that has a Matrix chip in it. No luck. This chip sucks. Will divineo give me my money back. This is ridiculous.

Haha, I put my matrix in, screwed it down, turned on the xbox and BAM!! It booted up. I didn't even try to align it. Good job to everyone that created the matrix chip.

Title: Spider Gx Won't Turn On
Post by: jokerking1569 on December 30, 2005, 02:37:00 PM

YIKES! this is a piece of shit, iv spent proably a total of about 14 hours trying to install this chip yet it still wont work rite, iv got the DO right, and iv got the modchip touchign the progo pings (i think, iv tried ever sqeenze method) yet it still frag and wont do anything, i think im with everyone else that has this chip and belive it would be the cause of a faulty flash, can anyone tell me how to flash my chip and put in a bios?? i cant get anny dashboard to come up (due to a failed softmod), someone help!

-iv got xbox v. 1 (theres solder in the holes, i crattered it in with a safety pin so the progo pins would stay in place

Title: Spider Gx Won't Turn On
Post by: Goeroe on January 06, 2006, 02:44:00 PM

same same, before checking out forums I bought this chip since Xenium Spice solderless chips weren't available anymore. I used common sense but in general almost everybody has the same trouble. With my chip everything is working the way it should exept booting up gives me frags. It really sucks. Guys from spider just don't comment which ofcourse sucks even more. I guess expect the quallity of the package it is just bad performance and a freaking joke. Some hobbying in the backyard I think.
It seems that the bios is not ok, but I haven't seen anywere how I can put in new bios from a non starting chip. Also all info on the website from http://www.hackdabox.com can found all together over the internet so read it done it etc but without any results. Thanks anyhow for this guy just to assure myself that I have done all I can and gathered it all together. Measured by AVO meter and all's ok

If someone has more suggestions ideas let me know.

Title: Spider Gx Won't Turn On
Post by: HackDaBox on January 07, 2006, 03:05:00 AM

Well i do have one idea left ...

Return the damn EVIL chip and live happily ever after !

HackDaBox !

Title: Spider Gx Won't Turn On
Post by: Goeroe on January 08, 2006, 01:49:00 PM

It seems to be going this way... Unfortunately I bought my chip on the web and the supplier is not responding on my bad news. I suggested not to sell these chips due to bad experience, and advised them to do some forums searches before selling new stuff. Since they are claiming to deliver quality and wish the best for their customers I would have expected this to be done, but not! This was the least I can do to prevent some other people from getting the same chip s..t. I will not tell the name of this website, give them some more week to anwer and come back to me.

xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team SpiderGX (SpiderGX, SpiderChip) => Topic started by: smdtherock on December 07, 2005, 12:45:00 AM