Post by: twiz9491 on November 18, 2009, 08:57:00 AM
Thanks
~!*TWIZ*!~
This post has been edited by twiz9491: Nov 18 2009, 04:57 PM
Post by: litspliff on November 24, 2009, 05:18:00 PM
XBpartitioner is the best for formatting and partitioning, but the interface is a bit harder to use and you don't get ftp access.
i also hear AID is a good disc.
the optimum solution for me would be XBMC on a DVD with XBpartitioner as an application, but i can never get XBMC to boot off of a DVD. if anyone knows how to do this, drop me a line.
Post by: litspliff on November 27, 2009, 11:24:00 AM
Post by: twiz9491 on December 08, 2009, 11:18:00 AM
QUOTE(justtaint @ Nov 21 2009, 07:49 AM) 
Download slayer's v1.7 or any other auto-installer disc and format the new HD.
i have slayers 1.7 and the AID disc but none of them boot up it wont even let me open the drive the eject light just flashes
Post by: Chancer on December 10, 2009, 06:26:00 AM
QUOTE(twiz9491 @ Dec 8 2009, 06:18 PM)
i have slayers 1.7 and the AID disc but none of them boot up it wont even let me open the drive the eject light just flashes
you need to open the drive one way or another because you need to boot with the autoinstaller in the drive.
Post by: bearcreek on December 10, 2009, 07:17:00 AM
Is the modchip light on? Is there a code before it goes black? Did you check to see if the hd is compatible?
Post by: twiz9491 on December 10, 2009, 09:14:00 PM
QUOTE(bearcreek @ Dec 10 2009, 03:17 PM)
Are you sure you didnt knock any wires loose when you took the hard drive out? It seems weird that the dvd drive wont open unless it is a samsung drive. Although did xbox 1.6 come with any samsungs? Anyway, the 1.6 requires 4 extra jumpers and it is quit possible that you knocked one loose. AID I believe is the better of the installers. It gives alot more options.
Is the modchip light on? Is there a code before it goes black? Did you check to see if the hd is compatible?
there is no wire i used the lpc rebuild board and it is a Philips drive. the mod chip light is flashing like normal and it goes straight to a black screen
i don't know what to do. Also just incase i cant get this one working does anyone know a good legit place to get a premoded one for a decent price?
Post by: bearcreek on December 11, 2009, 06:43:00 AM
Post by: Chancer on December 11, 2009, 01:04:00 PM
Has it worked fine at any point since the chip install?
You have most likely damaged something, Can you post pictures of the installation? someone may spot the problem.
As the BT point connects to the Eject, then damage here would stop the drive ejecting. A bad HDD would normally bring up the error screen
Post by: litspliff on December 12, 2009, 05:03:00 PM
Post by: twiz9491 on December 12, 2009, 06:18:00 PM
QUOTE(Chancer @ Dec 11 2009, 09:04 PM)
Did this box work perfectly before you installed the chip?
Has it worked fine at any point since the chip install?
You have most likely damaged something, Can you post pictures of the installation? someone may spot the problem.
As the BT point connects to the Eject, then damage here would stop the drive ejecting. A bad HDD would normally bring up the error screen
yes it worked perfectly, i didnt install the bt wire because the xbox doesnt work without the chip i think the mother board bios are messed up but the eject worked when i was in the flash bios menu.When the hdd went bad i thought it was the chip and i flashed it with the same bios i had on the cromwell bank witch is the evox m8+ bios so now i dont have the flash bios or the cromwell cuz the have be flashed over
Post by: litspliff on December 15, 2009, 02:57:00 AM
you could also just trade in for a new chip since you have the install properly done.
Post by: twiz9491 on December 16, 2009, 12:24:00 PM
QUOTE(litspliff @ Dec 15 2009, 10:57 AM)
as i said, i have some pre-chipped boards/boxes available. sounds like it would save you some headache.
you could also just trade in for a new chip since you have the install properly done.
how much?
Post by: litspliff on December 17, 2009, 01:53:00 AM
hit me up. you can browse around and make an offer, or i can quote you a price.
many ways to find me (links in my signature).
Post by: twiz9491 on December 17, 2009, 04:34:00 PM
QUOTE(Chancer @ Dec 10 2009, 02:26 PM)
you need to open the drive one way or another because you need to boot with the autoinstaller in the drive.
i did get the drive open and none of them boot no video no audio
Post by: twiz9491 on December 20, 2009, 11:46:00 PM
QUOTE(litspliff @ Dec 17 2009, 09:53 AM)
depends which one.
hit me up. you can browse around and make an offer, or i can quote you a price.
many ways to find me (links in my signature).
for shure im eyeing that 1.5tb one does it come in red?
Post by: litspliff on December 21, 2009, 02:06:00 PM
hit me up on e-mail.
dynatron -a- gmail.com
Post by: twiz9491 on December 24, 2009, 08:26:00 AM
QUOTE(litspliff @ Dec 15 2009, 10:57 AM)
as i said, i have some pre-chipped boards/boxes available. sounds like it would save you some headache.
you could also just trade in for a new chip since you have the install properly done.
did you get my email?