xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: HD10291 on April 27, 2008, 09:41:00 PM

Title: Duox 2 Gs Wire Install
Post by: HD10291 on April 27, 2008, 09:41:00 PM

Anyone know a tutorial for the wire install for DuoX 2 GS?

Title: Duox 2 Gs Wire Install
Post by: deilzfcjk on April 27, 2008, 11:31:00 PM

What you mean wire install? I don't fully understand you. If you're looking to install a duoX2 then just google it or go to the website. If you can't find out how to search for the info...then you shouldn't be modding xbox's.  I'm just going to assume that youre talking about v1.6 because I noticed in your sig that you say you hate v1.6's. If you're talking about the wired mod for the LPC rebuild board then search around and you see the rebuild points. Look for networkboy research. Or, if you have the lpc rebuild board then you can just line it up and see what points are leading where. It's simple really!!!!

Title: Duox 2 Gs Wire Install
Post by: HD10291 on April 28, 2008, 05:12:00 PM

Lmao, you don't know what a wire install is? Well there's pin header, and wire install. For pinheader you solder the pins into the mother board, and put the chip on the pins. For the wire install, you use wires instead of pins, kk? But I need to do the wire install because it is a v1.0 Xbox and I don't feal like desoldering all the LPC points, I'd rather just solder the wire into the already soldered hole. You shouldn't be so cocky unless you know exactly what you are talking about.

I went to the website and it sorta helped, I was just wondering if anyone had a good tutorial showing exactly how to do the wire install method for this chip.

Title: Duox 2 Gs Wire Install
Post by: Chancer on April 29, 2008, 05:11:00 AM

Not sure why you would need a tutorial for something like this. I haven't seen any with pictures and stuff. What are you stuck with. It is a very simple matter of soldering 30awg kynar wire between each LPC point and the point on the chip. The wires go one for one where the pin header would normally go. It is really very easy to figure out.

Title: Duox 2 Gs Wire Install
Post by: HD10291 on April 29, 2008, 07:30:00 PM

Figured there would be a tutorial, o well, I guess I'll figure it out myself, thanks!

Well I did it, that last post verified what I thought was right thanks again.

Title: Duox 2 Gs Wire Install
Post by: litspliff on May 14, 2008, 04:43:00 PM

QUOTE

Very funny: Bought a 1.4 Xbox from GameStop kk? Went home, tore it apart, put a broken 1.3 in it, made the case look like new, then returned it for a refurbished 1.5. Nifty aye?

 

nifty? maybe.

but, i'd kick your a$s for trying that sht, and it makes you a lowly THIEF.

 

seeing how you like to scam game retailers (see signature quote) i'm just going to flame you.

just put wires where the pins would be, how could you not figure that out?

you might want to get into a different hobby.

don't try buying anything in my shop either.

 

f'n jckss