xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: ctgene on February 01, 2007, 09:55:00 AM

Title: Frags With Chip In
Post by: ctgene on February 01, 2007, 09:55:00 AM

error 9 is not a common problem...are you using your std. hdd? were you able to get to the flashbios screen and flash a bios? if you are trying to install another hdd, then switch back to your old one, to get the bios loaded, provided you don't get the frag..if you are getting a frag then it most likely is your soldering...

Title: Frags With Chip In
Post by: ctgene on February 02, 2007, 01:57:00 PM

if you are only getting this error with the chip in and you haven't replaced the original hdd, and if you are not getting to the flashbios screen then I would definitely suspect your soldering and the d0

Title: Frags With Chip In
Post by: _GhOsT_ on February 04, 2007, 12:58:00 PM

error 9
hdd parameters, certain size

the hard drive has to be bigger than 8 gigs

which seems strange that it only gives the error when the chip is on