xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: Chancer on January 03, 2007, 03:18:00 PM

Title: Black Screen On Xbox Ver 1.1 Duox2 Gs Cromwell
Post by: Chancer on January 03, 2007, 03:18:00 PM
You have a short somewhere . Pics of the install may help someone spot something
Title: Black Screen On Xbox Ver 1.1 Duox2 Gs Cromwell
Post by: iamcanadian2222 on January 13, 2007, 12:03:00 AM
I put a DuoX2 in my 1.1 xbox and it would power cycle three times then frag.  I had a functioning v1.4 xbox with an Xecuter3, so I swapped the two chips and everything works fine.  It makes absolutely no sense to me, but it seems like it was having an issue with the version of xbox.

(I swapped them in and out twice and ran into the problem both times, so I'm pretty sure it wasn't just a soldering issue)
Title: Black Screen On Xbox Ver 1.1 Duox2 Gs Cromwell
Post by: Chancer on January 13, 2007, 09:29:00 AM
QUOTE(iamcanadian2222 @ Jan 13 2007, 07:10 AM) View Post

I put a DuoX2 in my 1.1 xbox and it would power cycle three times then frag.  I had a functioning v1.4 xbox with an Xecuter3, so I swapped the two chips and everything works fine.  It makes absolutely no sense to me, but it seems like it was having an issue with the version of xbox.

(I swapped them in and out twice and ran into the problem both times, so I'm pretty sure it wasn't just a soldering issue)

Sounds like you had a corrupt bios on the Duox if you were getting FRAG bu the xecuter chip worked.