xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: cerealkillajme on December 05, 2006, 09:42:00 PM

Title: Doux 2 White Boots Original M$ Bios
Post by: cerealkillajme on December 05, 2006, 09:42:00 PM

Power is modchip on, Eject is modchip off.

If it's not just that, then check the D0.

Title: Doux 2 White Boots Original M$ Bios
Post by: Chancer on December 06, 2006, 08:54:00 AM

Ground the Xbox D0 point. In other words take off the wire from the chip end and solder it to a metal ring round a scew hole.
If it still boots the regular MS bios then the D0 is definetely wrong

Title: Doux 2 White Boots Original M$ Bios
Post by: 1337 pig on December 06, 2006, 04:09:00 PM

Yes that is what it should do, just use a multimeter to check if the bottom lpc holes are connected to the corresponding ones on the modchip and if u dont know u set ur mutimeter to ohms and if it is 0 they are connected.

Title: Doux 2 White Boots Original M$ Bios
Post by: Chancer on December 07, 2006, 01:31:00 AM

Check all the soldering work to the LPC. Also check the BT connection to the motherboard

Title: Doux 2 White Boots Original M$ Bios
Post by: remote on December 08, 2006, 05:36:00 PM

I've checked (and double checked) the soldering and there doesn't seem to be a problem. I'm guessing if there's a problem I wont be able to check just by looking. I've ordered a multimeter and I'll check the connections once it gets here. I'll keep you guys updated, thanks for all your help.