xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: woofis on March 05, 2006, 04:13:00 PM

Title: Wire Install With Duox2 White?
Post by: woofis on March 05, 2006, 04:13:00 PM
let me start off by saying sorry if this is a stupid question.. i tried searching but the search is down. anway...
i got the solderless duox2 kit from appleguru.. solderless did not work so im going with solder now. my question is, does duo have any of those wire installs like the x3 has? where u plug the pin header into the female header onto the chip and the wires are connected to that... i am saying this because im fixing a 1.0 xbox and its a hassle to desolder the lpc then resolder a pin header.. any help is appreciated.

edit: i have an x3 here with an x3 wire install kit. 1 question though. is the long wire connecected to the x3 pinheader for the d0?
Title: Wire Install With Duox2 White?
Post by: Exodus989 on March 05, 2006, 05:36:00 PM
Red = 5V  The D0 is not on the pin header, it's in a seperate spot.
Title: Wire Install With Duox2 White?
Post by: woofis on March 05, 2006, 06:01:00 PM
what about the wire install on duox2... is there such a thing where i can just plug the female header connected to the wires onto the male header wich is soldred on the duox2?
Title: Wire Install With Duox2 White?
Post by: _GhOsT_ on March 05, 2006, 08:14:00 PM
make the wire so they are like the install on the duox web site
with the a,b,c, etc wiring
IPB ImageIPB ImageIPB ImageIPB Image

hope my pics have helped (sorry its my web cam)
Title: Wire Install With Duox2 White?
Post by: woofis on March 06, 2006, 12:52:00 PM
i talked to appleguruo last night... hes making me 1 of those..(ghosts picture)  because i lost mine... my duox2 was suppose to be solderless so the d0pad on the duox2 is soldered to the 4th pin.. so when i go to do my install i just use the 4th wire and solder that to my d0 correct?