xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: Julius Pleaser on January 15, 2006, 06:11:00 PM

Title: What Do I Do After I Get My Duox2 Lite Working?
Post by: Julius Pleaser on January 15, 2006, 06:11:00 PM

http://www.hackdabox...2_Flashing.html

Use bios X2 4981.06 unless you are sure you don't have a clone.  If it is not a clone use 5035

Title: What Do I Do After I Get My Duox2 Lite Working?
Post by: maxima1274 on January 15, 2006, 08:37:00 PM

Check ur to make sure ur bt wire is soldered.

Title: What Do I Do After I Get My Duox2 Lite Working?
Post by: maxima1274 on January 15, 2006, 08:51:00 PM

well if u solder the bt wire and then when u boot with eject it will disable the modchip and go to the ms dash so yea u need to solder it to go on xbox live.

Title: What Do I Do After I Get My Duox2 Lite Working?
Post by: Julius Pleaser on January 15, 2006, 08:54:00 PM

The easiest spot to solder the BT is to the eject button location rather than the Alt BT.  Just remember it is the upper left solder point on the back of the eject button.

Title: What Do I Do After I Get My Duox2 Lite Working?
Post by: Nugwin on January 15, 2006, 08:57:00 PM

ok thanks dudes.