xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: cubistproject on August 20, 2005, 05:17:00 PM

Title: Flashing Tsop With Duox2?
Post by: cubistproject on August 20, 2005, 05:17:00 PM: You can't reflash the TSOP by booting from the LPC.
Sorry.

You could flash a retail bios on bank 0 and a hacked bios on bank 1 and then wire the switch to the outside of the xbox so that you can switch banks with the switch

If you want to reflash your TSOP you'll need a 29 wire mod to boot from another EEPROM in parallel with the TSOP, then cut a couple of wires and reflash.

There are guides on doing it with 29 wire mods like the stingray.

It's not an easy thing to do tho.
Title: Flashing Tsop With Duox2?
Post by: cubistproject on August 20, 2005, 05:48:00 PM: Nope.
You can't flash to LPC when booting from TSOP
You can't flash to TSOP when booting from LPC
Sorry!
Title: Flashing Tsop With Duox2?
Post by: br0w on August 20, 2005, 07:30:00 PM: the only way to flash a tsop (modchip wise) is with a 29 wire mod. thats why you cant use an lpc chip to do tsop repairs.

you CAN use a modchip to get ftp acsess to get softmod files onto the drive in order to flash the tsop once it is removed and you boot from the softmod, but beyond that, if you boot from the lpc, you cant flash the tsop.
Title: Flashing Tsop With Duox2?
Post by: ModdingManiac on August 21, 2005, 12:56:00 AM: QUOTE(Zanzang @ Aug 21 2005, 02:48 AM)
I've got to call BS on that...
Title: Flashing Tsop With Duox2?
Post by: HackDaBox on August 21, 2005, 09:32:00 AM: Your tsop is fraging ! you have killed both banks and only a 29 wire mod can fix it now. You have been told many times now so accept the info or the thread will be closed. When you boot from the tsop you can only access the tsop! You can't boot from the tsop so you can't fix it ! You had 2 chances and blew them both !

HackDaBox !
Title: Flashing Tsop With Duox2?
Post by: ModdingManiac on August 21, 2005, 11:47:00 AM: QUOTE(Zanzang @ Aug 21 2005, 06:11 PM)
Any suggestions as to what I could use a SPDT switch for inside of a box with a Duox2?
Title: Flashing Tsop With Duox2?
Post by: somegamer on August 21, 2005, 09:27:00 PM: Ok, this thread is pretty long and it basically saids the same thing over and over again. So to answer your last question. Where should the wire go for it to work? Just follow the installation instructions as instructed for installing a DUO X2 chip. Since you know that your TSOP is unflashable/unrecoverable then ground d0 so that it always boots from the DUO X2 chip. Then just setup the DUO X2 just like you had it setup before for your TSOP flash with the switch.
Title: Flashing Tsop With Duox2?
Post by: HackDaBox on August 22, 2005, 09:28:00 AM: Urm Somegamer i think Zanzang was asking how to wire up the toggle switch to the Duo X2 !

Zanzang use the search button as there are already a number of threads covering the info you need !

HackDaBox !
Title: Flashing Tsop With Duox2?
Post by: Chancer on August 22, 2005, 10:09:00 AM: QUOTE
I still think there is a way to flash TSOP after booting from LPC...I just think nobody knows exactly how to do it.

There is NO WAY. I think you are lucky anyone helped you out the way you were dismissing everyones advice.
If you know so much then sort out your problems yourself before I call BS on this complete thread.
Title: Flashing Tsop With Duox2?
Post by: acemilo on August 22, 2005, 10:00:00 PM: You CAN flash your tsop with an lpc mod chip, but ONLY if it is a cheapmod based chip, like homebrew chips or a matrix and you have a 1.0/1.1. You CANNOT flash the tsop with a duox2. If either of your banks are working you can still use it and reflash, but if they both frag, you need either a cheapmod based chip or a 29 wire mod.
Title: Flashing Tsop With Duox2?
Post by: Chancer on August 23, 2005, 06:32:00 AM: QUOTE
You CAN flash your tsop with an lpc mod chip, but ONLY if it is a cheapmod based chip, like homebrew chips or a matrix and you have a 1.0/1.1.

Ok no 3 wire trick no 29 wire as theyare not LPC based.
Tell us how to flash the TSOP by booting say a cheapmod SST49LF020 wired straight to the LPC on a V.10
Title: Flashing Tsop With Duox2?
Post by: Chancer on August 24, 2005, 03:26:00 PM: QUOTE
In the tutorials section:

This does not work unless the TSOP is already good. Its also not what I was getting at but I did not know of the matrix method. I wish I had one now cause I have a 1 box
The inference is that you can boot from an LPC modchip to reflash a hosed TSOP and I still say it cannot be done.
even the methods linked would need a 1 meg flash rom and as said they don't work with a stuffed TSOP
Edit
Sorry catdog2 I forgot to say Thanks for the links it is appreciated.