xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: Chancer on August 01, 2005, 06:06:00 AM

Title: Duox2 Won't Take 5035 Or 5032
Post by: Chancer on August 01, 2005, 06:06:00 AM
I have had this problem with this bios before. Everyone else will tell you there is no problem but I tried more than one chip. the method i used to flash it was Eurasia and it worked fine. You could also try the HackDaBox Re-Flash disc as well.
Title: Duox2 Won't Take 5035 Or 5032
Post by: HackDaBox on August 01, 2005, 07:51:00 AM
smile.gif



Title: Duox2 Won't Take 5035 Or 5032
Post by: otherguy on August 01, 2005, 03:08:00 PM
you didn't happen to reflash over the bank you were booting off of did you?
Title: Duox2 Won't Take 5035 Or 5032
Post by: Orionn on August 01, 2005, 04:03:00 PM
Nope. Both banks were running a working X2.4981. And if it was a bad flash, the LED would come on the LED and it would frag. The mod isn't turning on at all.
I'll try re-flowing all the soldering later, and see what that does.
Title: Duox2 Won't Take 5035 Or 5032
Post by: HackDaBox on August 02, 2005, 07:57:00 AM
smile.gif

NEVER flash a Duo X2 Clone with the X2 50XX bios as it doesn't work !

HackDaBox !

PS The chip functions very well in all other ways and flashes perfect everytime with any flashing tools using Evox M8 PLus or X2 4981 bioses.