xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: reststop on July 29, 2005, 08:19:00 AM

Title: Duox2 Problem
Post by: reststop on July 29, 2005, 08:19:00 AM
Just a little more info, I dont seem to get any video on tv at all, just the front LED flashing 3 times accompanied by 3 whirring sound then the red and green lights.  Should I see anything on the sceen.  All new to me , thanks again.

rest
Title: Duox2 Problem
Post by: HackDaBox on July 29, 2005, 10:27:00 PM

It sounds like you have a solder splash somewhere on the board. Don't remove the headerpin yet , just use a mag glass to look very carefully and slowly ( you can't rush this process. Sunlight is best !

Use solder wick to remove any ssplashes . You simply put the wick on the solder splash and then put your clean hot iron on the wick and the solder will run up the wick !

HackDaBox !

www.HackDaBox.com