xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: jcupp114 on June 26, 2005, 03:39:00 AM

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 03:39:00 AM

I just modded a xbox with the date of 3-12-2003 with a duox2 white. I followed all the steps and bam, I in there.

15 minutes later I decided that I was going to put the case backup together and continue my game play and I get a 3boot frag.

I need nothing different as when it work then when It didnt. Not modded yet, regular ms dash was up and running. nothing was dropped. and now this. If someone is willing to fix this bad boy up for a awesomely decent price. I would thank that person very greatly or if its an easy fix just let me know.

I dont get it!
Take care
Jcupp114

I did use the hackdabox and it did work very well until the xbox's turrets  kicked in.
Take care
GOD Bless
jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on June 26, 2005, 04:00:00 AM

Well if your saying it worked with the lid off and then once you put the lid on it stopped working then you must of ripped the BT wire off the point behind the eject button with the dvd-rom's legs !

Just open up and double check all wires are connected ok if anything was ripped off then solder it back on. If nothing looks bad check this Link!

HackDaBox !

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 04:26:00 AM

I did the bt to g on the chip for always on. Thats ok right
Only reason why is that the xbox fragged before hand no vid sound type of deal.

I went back and checked the board just now and Im clueless. the pin header is good and the D0 is good and runs through the header to the screw hole closest to the lpc. Soldered on and is good.

Anyelse maybe? or are my eyes not trained for what could be?
take care
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 04:45:00 AM

Here is the chip. Sorry the picture sucks!


Man Im upset with canon. I figured Id get better shots than this.

Anyway I have examined the lpc again and nothing. I see nothing. Again if anyone could help me out please let me know. Take care
and GOD BLESS
Jcupp114

Title: Duox2 Just Died
Post by: antz1970 on June 26, 2005, 04:49:00 AM

a frag usually means that your d0 to ground wire is fine , check your bt to pin 9 wire , and go over all your lpc points with the soldering iron again ,

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 04:51:00 AM

Man thats a sorry excuse for a picture. However,
I pulled the chip off the xbox and I get the same situation. 3 frags and the xbox is out with a red green led to top it off.
Now Im guessing that my chip is good and my problem is with the board. Take care
Jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on June 26, 2005, 04:54:00 AM

AARRGGHH my eyes !

 Man that picture burn't my eyes ! OK seriously get a new camera of atleast 5 megapixels

So you have linked BT to G ( pin9 ) and yeah thats ok. So the onboard BIOS does not work ? it just gives a black screen and no audio ? If this is correct then if D0 was not making a good contact you would get the black screen ( no video - no audio ) so your D0 must be working !

Just pull the chip off and put it back on and see if it will boot. Other wise i guess just resolder everything it only takes a couple of minutes and it won't hurt !

HackDaBox !

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 04:59:00 AM

should i pull the header. I mean If I feed enough solder to header, it might have a baby....  Just dont what to bridge a point or two.
Take care
I will need some desolder braid
jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on June 26, 2005, 05:12:00 AM

 Well if you have heaps of solder on it allready just heat the joints and don't add anymore solder !

 Or if you have a multimeter then use it to check the continuity of each joint. If it worked once and now doesn't it usually means the soldering.

HackDaBox !

Title: Duox2 Just Died
Post by: novakpower on June 26, 2005, 09:31:00 AM

The soldering from what I can tell from the picture looks off.  This is how your solder should look flowed properly.

Title: Duox2 Just Died
Post by: HackDaBox on June 26, 2005, 10:08:00 AM

OK mister show off with his crystal clear picture with 100% clarity !

lol just kidding ... you may be correct ... i can't tell anything from that photo !

What theres a DuoX2 in that picture ? where ! LOL

HackDaBOX !

Title: Duox2 Just Died
Post by: jcupp114 on June 26, 2005, 03:58:00 PM

novakpower :    thats the one. That you for the pic bro. I took some batting practice with my canon camera. It didnt take the picture well yet shatters extremely well      

However, Im at wits end with this. I have resoldered the entire process again and nothing. Ill take it on a burner in my mind as time passes and try again until I get it or someone helps me out
Take care
Jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on June 26, 2005, 04:21:00 PM

So the xbox frags with the chip removed ? then you have a problem with the
motherboard. You need to have a good look at it with a magnifying glass using a
good light ( or outside in the sun ) and remove any solder splashes / balls you find.

Once the motherboard does not frag anymore then put the chip back in.

HackDaBox !

PS use solder wick to clean up any solder splashes / balls !

Title: Duox2 Just Died
Post by: jcupp114 on June 27, 2005, 09:36:00 AM

OK Im getting a three boot then the christmas tree of red, green. Im still working on it. I have the pin head desoldered and will reattempt tonight. Thank you for your time everyone. Keep the suggestions coming. Take care
Jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on June 27, 2005, 09:44:00 AM

Do you have a flatbed scanner ? if you do then lay the board on it and scan it and post the pic here or grab a mates digital camera.

Did you find any solder splashes / balls ?

There is no point putting the pinheader and or chip back in if it's fragging now !

You have removed the D0 to ground wire haven't you ?

Title: Duox2 Just Died
Post by: jcupp114 on June 27, 2005, 10:22:00 AM

HackDaBox
Yes the motherboard is back to an oem status minus the fragging. I did went through the board and founch some splashes but not the one that is given me the error yet. I will get me a camera today or scan and post. Thank you bro

God bless
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on June 30, 2005, 06:11:00 AM

***********************Update status*********************
I placed the pin head on board soldered it on, then the pin head on the duox2 chip. Everything seemed well. Then I connected the D0 from the v1.0 to ground. Then the BT on chip to stay on at all times.   right!!! So I checked and put everything back inside the xbox.
Booted.... Then got the 3boot with red/green.
So I pulled the D0 from ground and the xbox booted normal as the chip flashed its red led as working status.
My question is what do I try next. Is it the lpc solder job thats bad? Should I find alt 1.0-1.1 D0 point to solder to. Any feedback would be really awesome. Thank you in advance. Take care
jcupp114

Title: Duox2 Just Died
Post by: antz1970 on June 30, 2005, 06:22:00 AM

when you ground d0 , you force the xbox to boot from the lpc , if you get a frag it means your d0 to ground wire is fine and 9/10 it is a problem with the lpc soldering(the fact that the red light flashes only means your ground and 3v connections are correct , what i would do is use a fibreglass pen on the lpc , then resolder all the connections

Title: Duox2 Just Died
Post by: jcupp114 on June 30, 2005, 07:02:00 AM

If you could please explain that process if you would. Thank you.
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on June 30, 2005, 12:13:00 PM

If anyone has any suggestions please let me know

Thank you for your time.
GOD BLESS
Jcupp114

Title: Duox2 Just Died
Post by: gundamhr on June 30, 2005, 11:23:00 PM

hey, i figured this out the hard way, but if you tighten all the screws too tight, then the m odchip won't boot sometimes, this isn't a fact or anything, but i thought it would help.

Title: Duox2 Just Died
Post by: jcupp114 on July 01, 2005, 12:10:00 AM

check the lpc   ckeck it and your right
 
I also see now that somehow my duox2 white did a number 2 on my xbox and needs some reflash assistance. Hope its fixable. I have a little bit of spec as to how to boot it if one does not might.  

Take care
Jcupp114

GOD BLESS
 

Title: Duox2 Just Died
Post by: HackDaBox on July 01, 2005, 07:51:00 AM

otherguy or LepPper can help with a hotswap !

HackDaBox !

Title: Duox2 Just Died
Post by: jcupp114 on July 01, 2005, 08:43:00 AM

O-YA
Glad have the scene to pull information from. Awesome resource of information and people (minds).

The LPC was dirty (solder splashes) which under a mag... glass showed the two traces bridged. Once it was removed it I had a working xbox.

However, I did flash a duox2 white as your tutorial said and let a friend mod his xbox with it, however, when he returned it the chip would not work.
I believe it to be a bios issue. I HOPE!
I will setup a 1.0 with D0 on ground tonight and bridge the bt and g on chip to see if would work.
Take care and GOD BLESS

Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 01, 2005, 11:42:00 PM

got a duox2 chip that will function right! I got the chip ready for flash hardswap. Yet it tells me that the chip is invalid. What may be the problem? Anyone?

And if the chip is messed up. Where can I get 2 duox2's for 10.00 a piece?

Take care
Jcupp114

Title: Duox2 Just Died
Post by: HackDaBox on July 02, 2005, 06:46:00 AM

Title: Duox2 Just Died
Post by: jcupp114 on July 04, 2005, 05:23:00 PM

I have the bt and 9 pin conneted and the D0 to ground. I booted the cromwell and switched the chips and got an error invaild statement. I switched the bank and got it again with eurasias pro disk.
Any ideas or can someone be so kind as to reflashing the chip? Take care and GOD BLESS
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 04, 2005, 05:36:00 PM

Also, could anyone tell if they have any original duox lites for 9.00? I need two! Take care.

Title: Duox2 Just Died
Post by: jcupp114 on July 05, 2005, 10:01:00 AM

bump for feedback on this.

Take you for your time and GOD BLESS

Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 05, 2005, 02:06:00 PM

Sorry, your right on the buying.
Could someone diagnose this.

I have the bt and 9 pin conneted and the D0 to ground. I booted the cromwell and switched the chips and got an error invaild statement. I switched the bank and got it again with eurasias pro disk.
Error was unknown chip or ...... at dev 0*ff and man0*ff
So I entered in the string into the raincoat cfg file and tryed again and got another error
error at 0*0 wrote at 0*09 read at 0*ff

Any ideas or can someone be so kind as to reflashing the chip? Take care and GOD BLESS
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 06, 2005, 07:26:00 AM

ok I tried to flash with evox or remotex and I get the same error. It states error at man..0*ff and dev.. 0*ff.
Then when I enter the ffff in the evox script to identify as it will. I get another error. It states error at 0*0 wrote 0*09 read 0*ff.

Is there a fix for this error with my duox2 white?
Take care
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 08, 2005, 06:24:00 AM

Is the modchip bad? I Please read the above and post you thoughts. Thank you for your time.
Jcupp114

Title: Duox2 Just Died
Post by: jcupp114 on July 12, 2005, 07:59:00 PM

QUOTE

I have the bt and 9 pin conneted and the D0 to ground. I booted the cromwell and switched the chips and got an error invaild statement. I switched the bank and got it again with eurasias pro disk.
Error was unknown chip or ...... at dev 0*ff and man0*ff
So I entered in the string into the raincoat cfg file and tryed again and got another error
error at 0*0 wrote at 0*09 read at 0*ff

Any ideas or can someone be so kind as to reflashing the chip? Take care and GOD BLESS
Jcupp114

QUOTE

ok I tried to flash with evox or remotex and I get the same error. It states error at man..0*ff and dev.. 0*ff.
Then when I enter the ffff in the evox script to identify as it will. I get another error. It states error at 0*0 wrote 0*09 read 0*ff.

Is there a fix for this error with my duox2 white?
Take care
Jcupp114

QUOTE

Is the modchip bad? I Please read the above and post you thoughts. Thank you for your time.
Jcupp114

Can anyone help with a reflash on this? Or a walkthrough to diagnose the problem. Take care
Jcupp114