xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: Mattyb2001uk on February 01, 2005, 01:18:00 PM

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 01:18:00 PM

I have just installed a DuoX 2 White version in a Crystal.  When I turn the xbox on the red light on the chip flashes, Green light on the front stays on but I get no picture.  It works fine with the chip disabled.  Any Ideas?

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 01:38:00 PM

i know its a stupid suggestion , but you do have it switched to bank 1 for v1.6(im assuming the white cromwell edition is the same as the blue one with 2 banks)? , other than that recheck your lpc wiring , altho it sounds like it could be a cromwell incompatibility with your 1.6 but i really aint sure

also im sure i read thatsome people have probs with a/v leads other than the one you get with xbox , again not 100% sure tho

**edit** oops sorry just done some reading on the white duox , i was wrong , it dont matter what bank you use , sorry i would still try bank 1 tho

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 01:43:00 PM

Yeah its on bank 1.  You cand hear the DVD power up and HDD, just nothing on the screen.  I have a version 1.2 with a DuoX White 2.  Should I flash that with the M8 bios then try that in the 1.6.  I redone the LPC wiring again aswell.

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 01:48:00 PM

was just reading on team executors website that flashbios3.03 (the one on bank 1) may not work on a v1.6 ,(its seemingly fine on a v1.6b lol)id try hotswapping it in your other xbox and try m8 1.6 remember and link bt to quicksolder point 9 to be able to hotswap

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 01:51:00 PM

QUOTE(antz1970 @ Feb 1 2005, 08:54 PM)

was just reading on team executors website that flashbios3.03 (the one on bank 1) may not work on a v1.6 , id try hotswapping it in your other xbox and try m8 1.6 remember and link bt to quicksolder point 9 to be able to hotswap

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 01:59:00 PM

point g on the duox2 install diagrams for v1 - 1.5 or its the 2nd pad down from d0 on chip

Title: Duox 2 On 1.6
Post by: ModdingManiac on February 01, 2005, 01:59:00 PM

DELETED..SEE BELOW

Title: Duox 2 On 1.6
Post by: ModdingManiac on February 01, 2005, 02:04:00 PM

Disregard my previous reply..didn't realize you were talking about another system..so yes follow antz reply about hotswapping

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 02:18:00 PM

What do I need to do in the Evox.ini?

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 02:34:00 PM

shouldnt need to do anything m8

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 03:01:00 PM

Triple checked everything, Rebuild, all solder joints, Flashed with M8 plus but still no picture!  Need urgent help!

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 03:12:00 PM

are you using the standard a/v cable?

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 03:23:00 PM

Yeah.  I wos wondering, I have the pin between  A and B soldered could that be it?

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 04:37:00 PM

Please!!!! Anyone have any ideas?

Title: Duox 2 On 1.6
Post by: ModdingManiac on February 01, 2005, 04:48:00 PM

QUOTE(Mattyb2001uk @ Feb 1 2005, 10:29 PM)

Yeah.  I wos wondering, I have the pin between  A and B soldered could that be it?

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 04:57:00 PM

Ain't got a camera.  Does the thickness of the wire matter?

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 04:57:00 PM

aint that the pin they warn u in some of the diagrams not to solder to @ all??like in the diagram here not saying it would have any bearing on your problem tho

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 05:02:00 PM

QUOTE(antz1970 @ Feb 2 2005, 12:03 AM)

aint that the pin they warn u in some of the diagrams not to solder to @ all??like in the diagram here not saying it would have any bearing on your problem tho

Title: Duox 2 On 1.6
Post by: antz1970 on February 01, 2005, 05:05:00 PM

i dunno if the thickness of the wire would matter , all the guides tell ya to keep all wires as short as possible , and not to cross any over each other(so i spose the thickness of them may matter???) , what size wire did you use , it cant have been that thick lol

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 05:19:00 PM

 

Thanks Guys!

Title: Duox 2 On 1.6
Post by: ModdingManiac on February 01, 2005, 05:46:00 PM

QUOTE(Mattyb2001uk @ Feb 2 2005, 12:25 AM)

It appears it was the bios, IT WORKS!!!!!!  

Title: Duox 2 On 1.6
Post by: Mattyb2001uk on February 01, 2005, 06:12:00 PM

I had flashed it with a bad M8+.  I spoke to a friend and he said reflash it in my old xbox with a different download of the M8+.  So i did it and it worked!