xboxscene.org forums

OG Xbox Forums => Modchip Forums => Team Omega Chips (DuoX) => Topic started by: antz1970 on January 23, 2005, 12:04:00 PM

Title: Red/green Flashing And No Audio Or Video
Post by: antz1970 on January 23, 2005, 12:04:00 PM

have you connected the bt wire to behind the eject switch ?, have you connected d0 to the chip or to ground? , more info needed , if you have grounded d0 for "always on" u will need to connect bt to pin9 on the quicksolder pads of the chip(3.3v)

Title: Red/green Flashing And No Audio Or Video
Post by: HL_101 on January 23, 2005, 12:52:00 PM

Recheck your solider lpc soldier points.

Title: Red/green Flashing And No Audio Or Video
Post by: Liquid_Smoke on January 23, 2005, 03:54:00 PM

I redid all of the lpc solder pionts, they are all good now but the xbox still wouldnt work. I also tried to boot into the second bios on the mod chip but it still didn't work, so now I just took out the mod chip and my xbox works.

Title: Red/green Flashing And No Audio Or Video
Post by: Liquid_Smoke on January 23, 2005, 04:30:00 PM

anyone know how to check the modchip to see if it is any good? or check to see if the points are soldered good?