xboxscene.org forums
OG Xbox Forums => Modchip Forums => EB2K Chips (X-Chip) => Topic started by: xboxgamer733 on January 27, 2006, 12:07:00 AM
-
To install the solderless adapter into your Xbox, screw it onto the LPC bus as explained by this. You will not need to use the clear plastic guide, though, as it is used only with 1.6 consoles.
Then, insert the wire that comes out of the black plastic bottom (below the female plug) into the d0 point. All of the wires, except this LAD01 wire, will not be used.
Finally, to connect your X-Lite to the adapter, follow this guide.