xboxscene.org forums

OG Xbox Forums => Modchip Forums => EB2K Chips (X-Chip) => Topic started by: ricke666 on May 01, 2005, 04:23:00 PM

Title: What Should Happen?
Post by: ricke666 on May 01, 2005, 04:23:00 PM
No one? Nothing? Anyone? Not even a little cue?

What would you do?

RiCk
Title: What Should Happen?
Post by: christineyoung on May 02, 2005, 07:53:00 PM
Technicalyl speaking the chameleon solderless will not work, unless you have the XChip solderless

D0 wire is same on all solderless adapters and goes to pin #4 on LPC, fix back to original position of wire.

Now if you getting red led on xlite means power which means solderless is xchip solderless as it has pin #6 for 5V power which it needs.

Fix the D0 wire back to original and you should be fine.

BTW the tampering you are referring to is laser etching, that si normal on most preprogrammed chips... just lets manufacturers knos what code on chip and what revisions.
Title: What Should Happen?
Post by: christineyoung on May 03, 2005, 07:51:00 PM
You might need 100 MB of dummy files for the drive to read your bios disc.
Title: What Should Happen?
Post by: ricke666 on May 04, 2005, 12:35:00 PM
tongue.gif.  I tried CDRs and CD-RWs.

Anyway, with this chip, the X-Lite, I'll always be able to flash my chip via HTTP, or from the HDD.

Thanks,
Eric