xboxscene.org forums

OG Xbox Forums => Modchip Forums => EB2K Chips (X-Chip) => Topic started by: danno33 on October 06, 2004, 07:57:00 PM

Title: Evox Dash Problem
Post by: danno33 on October 06, 2004, 07:57:00 PM

If you're connecting the Xbox directly to your PC, you'll need a Cross-Over cable. If you have a Hub or Switch, you can connect to the Xbox through the Switch.

Hope this helps.

danno.

PS. You can connect to the Xbox via FTP using internet explorer. Just enter ftp://xbox:[email protected] in the address field. The x's have to be replaced with the rest of the IP Address.

Title: Evox Dash Problem
Post by: T.I.P on October 06, 2004, 10:18:00 PM

whats a cross over cable, and is there a difference between cross over cable and a normal ethernet cable?

Title: Evox Dash Problem
Post by: M$xbox on October 06, 2004, 11:01:00 PM

yes there is a difference , a cross over cable is used to connect a pc directly to another pc using 2 nics in one pc this would be the same thing with the xbox ... crossover cables are used to connect 2 pc's to share internet , files etc... without a router , hub , switch etc... you can find them on the net as cheap as 2 dollars