xboxscene.org forums

OG Xbox Forums => Modchip Forums => EB2K Chips (X-Chip) => Topic started by: christineyoung on August 30, 2004, 04:43:00 PM

Title: Xbox Xchip Installation
Post by: christineyoung on August 30, 2004, 04:43:00 PM
Sounds like your using solderless adapter, verify aligment is good and teh screw is snug and the plastic on the solderless adapter is touching the xbox motherboard.

The flashing lights is actual fragging, basically means modchip not attached properly or bios on modchip corrupted, but since you dont mention loading a bios to chip I can assume 1st not attached properly.
Title: Xbox Xchip Installation
Post by: dragon_stmu on August 30, 2004, 10:48:00 PM
well i have tried the rubbing alcohol but the chip is properly installed, because the red light turns on. i am gonna try the rubbing alcohol. Plus i have already try installing a bios but it doesnt work.
thanks unsure.gif
Title: Xbox Xchip Installation
Post by: [email protected] on August 30, 2004, 10:52:00 PM
ok. what i want u to do is put the cromwell factory bios back on the xchip that the full.bin file.
Just to make sure the xchip is wkring 100%
then RECHECK your d0
also.. unplug te chip form the solderless adaptor  then boot up the xbox (yet leave the sodlerless adaptor on the mother board) and c if it boots up normaly..
then let me know what happens.
so try those first.
if u need anything just ask!
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 02, 2004, 10:34:00 AM
hey i have tried everything that you guys told me but still doesnt work. The chip is properly installed cause the red light turns on and the bios works. The problem is the xbox it doesnt boot up. I mean i press the power button but what happens is that it tries to run but stops then tries again but stops again and then runs but the gree/red blinking light comes out.
Can somebody help me!!!
Thanks  ohmy.gif
Title: Xbox Xchip Installation
Post by: [email protected] on September 02, 2004, 04:46:00 PM
ok... man.. then it might b your harddrive try hooking up another one.
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 02, 2004, 07:07:00 PM
Do u mean another xbox hard drive or another hard drive cause i tried it with a WD 120Gb caviar, and still doesnt work.
And can i add u to my msn messenger?

Thanks
Title: Xbox Xchip Installation
Post by: christineyoung on September 02, 2004, 08:01:00 PM
If your box is starting/stopping how do you know the bios is working??

Verify solderless adapter install and all pins are alligned and plastic is flush with motherboard of xbox.
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 03, 2004, 11:32:00 PM
When do i know if the chip is the problem cause when my xbox was working properly even with that the crownwell bios didnt show up. So i am starting to think that is the chip the problem. Can somebody tell me if i am right?
rolleyes.gif
Title: Xbox Xchip Installation
Post by: [email protected] on September 05, 2004, 09:05:00 PM
does the light on the xchip come on?
Title: Xbox Xchip Installation
Post by: tanbam on September 05, 2004, 10:04:00 PM
I just bought one of these last week and I noticed an announcement on their website about what to do if you received a bad chip recently.  Mine was okay, but I can assume from the announcement that some number of bad chips must have been shipped.
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 06, 2004, 02:20:00 AM
yeap, The light on the xbox comes out but the cronwell bios never comes out, from the beginning. So maybe the chip is deffective.
thx
P.S. The Light in the xchip is properly working but the crownwell didnt show up.
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 06, 2004, 10:28:00 AM
I was looking around in the net and my problem is called christmas lights. Does anybody have had this problem before and how u can fix it. thanks
Title: Xbox Xchip Installation
Post by: prlr99 on September 07, 2004, 06:39:00 PM
I am having the same kind of problems.Pulled the chip out and left the solder-less adapter in and it shut down my machine. I am trying to install the chip on a 1.0.Can anyone tell me where I can find pictures of x box mother boards?
Title: Xbox Xchip Installation
Post by: [email protected] on September 07, 2004, 06:47:00 PM
ok.. guys for the last time!!!
ITS YOUR D0 OR YOUR SOLDERLESS ADAP IS NOT MAKEIN FULL CONTACT


im telling you.
thats YOUR problem. the light dont mean SHIT..
it means that the 5V and the GROUND pin(s) making contact..
did u clean ur mother boards with rubbing alchol
Title: Xbox Xchip Installation
Post by: d_v310p3r on September 09, 2004, 11:01:00 PM
Everyone listen to this guy. He is right. I got mine to work. I checked the D0 and I also put the rivets in, I hadn't before. But it is now working.

Thank you.

By the way ...

Now what!
Title: Xbox Xchip Installation
Post by: [email protected] on September 10, 2004, 09:41:00 PM
really?
u got it to work?
Title: Xbox Xchip Installation
Post by: dragon_stmu on September 15, 2004, 02:41:00 PM
nope i have tried everything but still doesnt work:S
so anybody any other advice
thanks