Post by: christineyoung on August 22, 2004, 06:53:00 PM
You can try wiring a wire to alternative D0 on the boxes as well under teh motherboard ( do a search for alternative D0 )
Post by: twisted.penguin on August 23, 2004, 07:02:00 PM
Also, dont blame EZB2k for your botched mod install, they're a great company.
Post by: Easybuy2000 on August 25, 2004, 07:33:00 AM
If you can program your chip via the X-control software it means that your chip is fine. If you are getting fragging it means that the D0 wire is good (making contact) but either the adapter is not making good contact with the Xbox motherboard or the adapter is not making good contact with the X-Chip.
Soldering the 1.6 can be very tricky. I recommend using the alt Lframe/D0 point on the bottom of the board instead of the top via point. Also I recommend using 26/28 gauge wire for the 5 volt point instead of 30 gauge. If you can't solder don't try it you will most likey mess it up. Give it to someboday who can solder or get a older Xbox and use the solder-less adapter.
Remember as soon as you break the seal on your Xbox you VOID the manufacture warentee. If you mess up the install it's YOUR responsibility not the vender/manufacture of the mod chip where you bought it from.
Post by: Easybuy2000 on August 25, 2004, 07:51:00 AM
There is normal shipping delay when sending product through the mail. 3 to 5 business days is the norm for shipping times.
Post by: [email protected] on August 25, 2004, 06:52:00 PM
Post by: Easybuy2000 on August 26, 2004, 08:05:00 AM
If you purchased only the X-chip it does not ship with the solder-less adapter. It only ships with a pin header.
Post by: christineyoung on August 26, 2004, 06:26:00 PM
Also, I can understand your greif and pain, but if you put your negative vibes into good vibes, i'm sure you can do it.
If this is your 1st soldering job, I wousl advise practice on something else 1st, old broken computer, vcr, etc so you won't feel the pain if damaged.
As for solderless adapter all on market have issues and eb2k's is by far the best and sell alot more so always looks like there's is the worst but in reality its proven best as sales versus complaints. I suggest reading xecuters solderless guide and xeniums solderless guides, as you can see a few simple mistakes and they don't work, alignment is key and flush to motherbaord.
P.S. RED LED just means 5V and GRD thats it!!!!! So if those 2 only making contact will look as if working , but not!!!! Unless using on pc side, turns off during programming!
Post by: Easybuy2000 on August 27, 2004, 07:54:00 AM
| QUOTE (christineyoung @ Aug 27 2004, 02:29 AM) |
| I thought pin header came no matter what if solderless ordered or not?????????????? Also, I can understand your greif and pain, but if you put your negative vibes into good vibes, i'm sure you can do it. If this is your 1st soldering job, I wousl advise practice on something else 1st, old broken computer, vcr, etc so you won't feel the pain if damaged. As for solderless adapter all on market have issues and eb2k's is by far the best and sell alot more so always looks like there's is the worst but in reality its proven best as sales versus complaints. I suggest reading xecuters solderless guide and xeniums solderless guides, as you can see a few simple mistakes and they don't work, alignment is key and flush to motherbaord. P.S. RED LED just means 5V and GRD thats it!!!!! So if those 2 only making contact will look as if working , but not!!!! Unless using on pc side, turns off during programming! |
When we ship the combo the pin header is included. When we ship just the X-chip it only ships with a pin header no rivets or screw.
Goood point about the red led. Just because you get a read led it does not mean that ALL contacts are working. It simply means that power is going to the chip which means that 5 volt power and ground are making contact. If you box frags make sure you have flashed with proper bios for your Xbox and make sure that ALL pins/points are making contact.
Post by: [email protected] on August 27, 2004, 09:42:00 PM
Post by: christineyoung on August 28, 2004, 08:00:00 AM
Why should you pay shipping since there shipping mistake....just tell them to sent you one as you paid for it.
Post by: [email protected] on August 28, 2004, 11:15:00 AM
what do u mean bigger? the rows? or ?
and im not good at understanding all this wire stuff?
how many wires do i need to actully solder on to the x chip and mb?
Post by: [email protected] on August 30, 2004, 05:01:00 PM
if i want it the next day i need to pay for the shipping thats BS. i fcking payed for the overnigth shipping and u guys messed up so i gave him the accout number and it ant there anymore. its not on ur records?? wtf?.. this is bs.. my credit card number ant there or anything.so what am i to do? really can u answere that?.
sorry man but, shit...
just leave it to easybuy...ur probley as stupid as the fuckin customer support guy u call.
Post by: [email protected] on September 07, 2004, 06:36:00 PM
Easybuy... do u have a solder install guide??
Post by: Easybuy2000 on September 08, 2004, 08:12:00 AM
Post by: Easybuy2000 on September 08, 2004, 08:15:00 AM
Sorry your part was missing during first shipment however as for missing parts that are small we only ship it via normal mail.
Post by: [email protected] on September 08, 2004, 09:30:00 PM
so if u can help me great... im just not going to be buying anything from easybuy2000 again...
do u have a solder install guide?
Post by: Easybuy2000 on September 09, 2004, 07:27:00 AM
Post by: [email protected] on September 09, 2004, 06:45:00 PM
let me start off again...
OK in febuary i orderd the camilion2 or whatever chipp. they said its on backorder. then they said if u orderd a camilion u will recive a xchip for the same price.. 23 somthing.. so i got that and the 12$ programer and the sodlerless adap... so i waited... waited waited.. finaily in july i caleld and gave him my accout number and he said oh im sorry ill send it out NOW with the programmer and the solderless adap.. so i said great how many days ? he said 5-10 .. i said can i get it rushed he said yeah its an exter whatever i said.. Ok do it.. the next day i got it! but it was ONLY the xchip it self.. no pin header ... no adap. no prgamer no nothin.... so icalled and he said sorry ill send uthe solderless tommorw or i got it... then he forgot about the programer .. i got that the following day.. and now cuz i need the pin header . i have to pay if i want it... shouldnt it have came with it?
so i called the other day and gave him my credit card# and my address and my number and my name. ect and he said... im sorry sir... ur accounts not here? u have to reorder it off the net?
like wtf ?
Post by: [email protected] on September 14, 2004, 04:15:00 PM
pretty Fed up eh??
i guess.. we'll just have to leave it to easybuy2000 to screw u over....
Post by: [email protected] on September 19, 2004, 12:38:00 AM
or talk to someone about this...
i have my fucking order number if u want it..
dought ull do shit about it..
Post by: ILLusions0fGrander on September 19, 2004, 01:58:00 AM
"fuck man, what the fuck, you fuckers fucked my shit up now i have to wait 5 fuckin days?"
how about handle your problems with them through their site, or their customer service, if they cant handle it, ask for a supervisor.... you sound like a blabbering idiot with all the swearing...
just my 2 cents... im sure your next post will be "fuck you too asshole"
Post by: [email protected] on September 19, 2004, 03:09:00 PM
and nah i ant gonna say fuck u asshole.. everyone has there say
just its pretty said that i orderd somthing and they messed it up everytime... and they lost my account number? comon man... thats NOT professional at all.
so? what where u saying i sound like an idiot... ok man...... im proving a point... theres a hole load of people that got ripped off and no seems to be doing anything about it..
and why where u on this forum for? u never leave posts here?
is there a reason?
and man... really read some more.. i did talk to thre custormer servic and they said they cant help me..
not trying to be a di*k but really.. its pretty say eh?
and Aphex242 ? dude???? "all over these boards" uhhh all over ehhh???
ok maybe u should think about that one again.... its looks to me that its the ONLY post... buddy..
Post by: Easybuy2000 on September 27, 2004, 09:10:00 AM
Post by: [email protected] on September 28, 2004, 05:57:00 PM
pm u.. ha ur probley the same damn moron i called in and talked to..
dont know to much ehh?
here i got something technical... dont order mod chips from places that mess your order up 3 times then expect u to pay for thier mess up..
what should i do..
technical disscussing enogh for you?
Post by: [email protected] on September 29, 2004, 06:39:00 PM
Post by: cravavr3 on September 30, 2004, 07:26:00 AM
| QUOTE |
| RATING CUSTOMER CARE We are starting a survey campaign for all our Customer Service email support, to basically find out how our customers feel about the type of support they receive via email. We would like all our customers who use email support to let us know how we're doing! At the end of each email, there will be a link that you can click on to participate in a 5-question survey we have put together. Please take a minute or two to answer the questions! We will be able to improve our Customer Service based on your input. Thanks to anyone who takes part! We appreciate it  |
Maybe venting directly at them will/could resolve issues faster for you. As I know your a good hearted soul and still help out xchip users dispite your complications of issues with eb2k.
Post by: [email protected] on September 30, 2004, 06:13:00 PM