Post by: polowy on December 31, 2004, 02:51:00 PM
im using an older x2 bios i belive it is 4922 (not 100%) i wanted to put 4983 on it but im unable to.... When trying with evox i get an unknown flash error (i thik i have the correct flash = ), when switching to bank 1 i get the cromwell clean screen but the drive ejects never says insert cd and there is no blue flashing from the xbox side. tried to put in a cd with a dummy file and LINUXBIO.BIN and it does nothing, i tried all banks except for the one i have working bios on.... can anyone help me out tell me why im unable to do flash the bios or if there is another way without getting a programmer.....
Post by: Exzir on January 01, 2005, 09:23:00 AM
Flash = 0x01d5,"AMD - Am29F080B",0x100000
Flash = 0x04d5,"FUJITSU - MBM29F080A",0x100000
Flash = 0xadd5,"Hynix - HY29F080",0x100000
Flash = 0x20f1,"ST - M29F080A",0x100000
Flash = 0xbf61,"SST - 49LF020",0x40000
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
Since you have a very old bios it also tells me you do not have the correct flash = ether.
Plus if you ever want to turn off your chameleon you will need to upgrade your evox also. I would think I am not 100% sure but the age of everything your useing. I am very shocked that you are able to get a screen with 4922 nrmaly a 1.5 will FRAG with 4922 I was under the impression but since I have not tried that old of a bios on a 1.5 I really would not know.
Post by: DJ Hoyt on May 16, 2005, 09:55:00 PM
Chameleon Mod w/adapter (not sure the version)
EvolutionX Build 3935
I'm not sure the old flash I used to have, I think it was 4983.06.
I want to flash my xbox because newer games aren't playing off the hard drive, so I assume after reading the FAQs, it's because of my old X2 Bios (stupid EA Sports games... Stranger's Wrath freezes at the first loading screen). I found an old topic about this that was archived and I tried putting in the codes in the flash bank codes in the ini and still no luck... same unknown flash type error. I'm not sure what the reply to this topic meant, so explain it to me because that might fix my problem. Thanks!
Post by: zends on June 08, 2005, 01:15:00 AM
Post by: MonsterTy on June 10, 2005, 08:16:00 PM
You may want post your problem here : Alternative ModChips & CheapMods, as you are in the Matrix/Chameleon forum and although I do not know for certain since I have not used or installed an Aladdin Live chip, I doubt the Chamelon is flashed the exact same way through Evolution X as the Aladdin chip (if possible) is.
@ DJ Hoyt :
Just in case after all of this time you are still waiting for an answer, try reading (if you have not done so yet) the Chameleon 1.3 User's Manual available here : User's Manual. I believe it has all the information you need to add to your evox.ini to enable you to flash the chip via Evolution X.
Post by: Apota on July 22, 2005, 04:07:00 AM
QUOTE(MonsterTy @ Jun 10 2005, 08:27 PM)
@ Zends :
You may want post your problem here : Alternative ModChips & CheapMods, as you are in the Matrix/Chameleon forum and although I do not know for certain since I have not used or installed an Aladdin Live chip, I doubt the Chamelon is flashed the exact same way through Evolution X as the Aladdin chip (if possible) is.
@ DJ Hoyt :
Just in case after all of this time you are still waiting for an answer, try reading (if you have not done so yet) the Chameleon 1.3 User's Manual available here : User's Manual. I believe it has all the information you need to add to your evox.ini to enable you to flash the chip via Evolution X.
You may want post your problem here : Alternative ModChips & CheapMods, as you are in the Matrix/Chameleon forum and although I do not know for certain since I have not used or installed an Aladdin Live chip, I doubt the Chamelon is flashed the exact same way through Evolution X as the Aladdin chip (if possible) is.
@ DJ Hoyt :
Just in case after all of this time you are still waiting for an answer, try reading (if you have not done so yet) the Chameleon 1.3 User's Manual available here : User's Manual. I believe it has all the information you need to add to your evox.ini to enable you to flash the chip via Evolution X.
Post by: Tooncis on February 03, 2008, 12:28:00 AM
QUOTE(polowy @ Dec 31 2004, 10:51 PM) 
Ok so i have a xbox 1.5 with a chameleon modchip (adaptor used)
im using an older x2 bios i belive it is 4922 (not 100%) i wanted to put 4983 on it but im unable to.... When trying with evox i get an unknown flash error (i thik i have the correct flash = ), when switching to bank 1 i get the cromwell clean screen but the drive ejects never says insert cd and there is no blue flashing from the xbox side. tried to put in a cd with a dummy file and LINUXBIO.BIN and it does nothing, i tried all banks except for the one i have working bios on.... can anyone help me out tell me why im unable to do flash the bios or if there is another way without getting a programmer.....
add this to your evox.ini file...
Flash = 0x015b,"AMD - Am29LV800B",0x100000
Flash = 0x01da,"AMD - Am29LV800B",0x100000
...and make sure you are using a full evox and not Slayers