Post by: GN fulda on February 23, 2004, 01:00:00 PM
)now, i`ve updated dash to 3935 but when i tried to flash bios with 4981.06(256kb). I ftp bin fil to a folder called bios, clicked on "flash bios" pressed y button
then it`s supposed to erase bios on chip right, but it would`t start erasing. the old bios still work and box work fine. open up xbox to correct the switch, there are 2 switches- 1 set to off, 2 set on, how should i set them to flash?? and what does that "N" on to topp of switch2 means??
any help would be great
i`m just familiar with x2.3+..
Post by: GN fulda on February 23, 2004, 08:10:00 PM
| QUOTE (twista23 @ Feb 23 2004, 11:49 PM) |
| try buying a programmer, its easy the easiest way, i think. |
can`t i flash this chip without a programmer??
what kind a shit is this
Post by: bucd on February 24, 2004, 12:57:00 AM
| QUOTE (GN fulda @ Feb 24 2004, 12:10 AM) | ||
can`t i flash this chip without a programmer?? what kind a shit is this |
Set both switches to ON and that will enable it to be flashed through EvoX.
That's assuming you already have some kind of bios loaded and just want to upgrade. Which is what it looks like.
It's very simple.
-D
Post by: GN fulda on February 24, 2004, 05:05:00 AM
| QUOTE (bucd @ Feb 24 2004, 10:57 AM) | ||||
Set both switches to ON and that will enable it to be flashed through EvoX. That's assuming you already have some kind of bios loaded and just want to upgrade. Which is what it looks like. It's very simple. -D |
thanks mat, that`s exactly what i needed to hear.
Post by: GN fulda on February 24, 2004, 09:48:00 AM
| QUOTE |
| Set both switches to ON and that will enable it to be flashed through EvoX. |
so i did, but it frags.... red green, with error code 16
if i set switch 1 off and switch 2 on it boot fine to evox...
so what the f... is going on?
i need to update the bios.
-
Title: Matrix Chip
Post by: duudfromnorway on February 24, 2004, 08:33:00 PM
-
ignore me
-
Title: Matrix Chip
Post by: GN fulda on February 25, 2004, 05:50:00 AM
-
if i set switch 1 off and switch 2 on it boot fine to evox...
so what the f... is going on?
i need to update the bios.
Post by: duudfromnorway on February 24, 2004, 08:33:00 PM
Post by: GN fulda on February 25, 2004, 05:50:00 AM
| QUOTE (duudfromnorway @ Feb 25 2004, 06:33 AM) |
| ignore me |
???bumpy bump
Post by: bucd on February 25, 2004, 05:55:00 AM
| QUOTE (GN fulda @ Feb 24 2004, 01:48 PM) | ||
so i did, but it frags.... red green, with error code 16 if i set switch 1 off and switch 2 on it boot fine to evox... so what the f... is going on? i need to update the bios. |
If you are having problems updating through EvoX, you can get a programmer like someone suggested above.
You can get one on from someone on here in the buy/sell section for around $10 or so.
You just have to remove the chip and program it through the programmer though.
-D
Post by: GN fulda on February 25, 2004, 06:06:00 AM
| QUOTE (bucd @ Feb 25 2004, 03:55 PM) | ||||
If you are having problems updating through EvoX, you can get a programmer like someone suggested above. You can get one on from someone on here in the buy/sell section for around $10 or so. You just have to remove the chip and program it through the programmer though. -D |
yea, if that is the last way out.. But i know there`s a way to flash, cause it`s possible....
Thanks anyway
so i whave to find somebody that knows how???
isn`t a tool that i could flash it with ,similar to flashx..?
Post by: GN fulda on February 25, 2004, 06:35:00 AM