xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: ofx210p on January 23, 2004, 12:16:00 AM

Title: Question About Soldering Points
Post by: ofx210p on January 23, 2004, 12:16:00 AM

If you connect the E and P points to the Eject and Power lines on the wiring harness. You have the ability to start up to the xbox WITHOUT powering up the chip, simply by turning it on by holding the eject button in for 3 seconds.

The only other thing you must do is flick the dip switches on the chameleon on to mode four (first two dip switches down)

It will work perfectly without the P and E wires connected though the only way to disable it  then is via evox etc. This is just a convenience thing.

Hope this helps

Cheers

Chris

Title: Question About Soldering Points
Post by: Sandman69 on January 23, 2004, 05:20:00 PM

Cool, Thanks for the info.