xboxscene.org forums

OG Xbox Forums => Modchip Forums => Matrix & Chameleon Modchips => Topic started by: Gmc on November 20, 2003, 01:13:00 AM

Title: Leaving The Matrix In Mode 4
Post by: Gmc on November 20, 2003, 01:13:00 AM
Mines left on Write mode, and have had no problems at all. Also it flashes ALOT faster on the Xbox than it does through the PC...
Title: Leaving The Matrix In Mode 4
Post by: newfie4ever on November 20, 2003, 01:22:00 AM
Mine also is left in mode 4. I found it works better that way for some strange reason. Now I have mine soldered in. I havent had to reflash yet so time will tell.

Title: Leaving The Matrix In Mode 4
Post by: newfie4ever on November 20, 2003, 10:25:00 AM
Everytime my kids moved it the Matrix came unaligned. I got tired of taking it apart to fix it.
Title: Leaving The Matrix In Mode 4
Post by: Devedander on November 21, 2003, 12:59:00 AM
QUOTE (Dankbud @ Nov 20 2003, 10:39 PM)
QUOTE (newfie4ever @ Nov 20 2003, 08:25 PM)
Everytime my kids moved it the Matrix came unaligned. I got tired of taking it apart to fix it.

thats why i got a chameleon.  wink.gif

You traded your kids in for a color changing iguanna?  That's cold blooded... but  a good idea.
Title: Leaving The Matrix In Mode 4
Post by: sleazy on November 23, 2003, 05:35:00 PM
blink.gif
Title: Leaving The Matrix In Mode 4
Post by: Allen626 on November 23, 2003, 06:49:00 PM
I keep mine in mode 4.  I also aligned the d0 pin up and screwed that whore in really tight.   Man that sounded bad...  But yeah mine never comes loose anymore unlike real whores.
Title: Leaving The Matrix In Mode 4
Post by: Gmc on November 24, 2003, 02:45:00 AM
QUOTE (Allen626 @ Nov 24 2003, 04:49 AM)
I keep mine in mode 4.  I also aligned the d0 pin up and screwed that whore in really tight.   Man that sounded bad...  But yeah mine never comes loose anymore unlike real whores.

lol biggrin.gif

Anyway yea I bolted my matrix down using a screw/nut and I've moved the console arond alot, and it still works perfect smile.gif
Title: Leaving The Matrix In Mode 4
Post by: Dubber on November 24, 2003, 03:33:00 AM
when I had a matrix chip, I removed the pogo pin for the D0 point with plyers.  then I soldered a 4 inch length of wire(something like 26 gage)  and put the wire through the d0 point and soldered just a little on d0.  Then put a piece of electric tape over d0 to hold wire firmly.  I also used the bolt method to hold the chip on.  Never had a problem with chip moving after that.
Title: Leaving The Matrix In Mode 4
Post by: drunkpug on November 24, 2003, 04:04:00 AM
i got sick of the matirx not makeing connections so i finally just ended up BOLTING that s.o.b down

rofl

that shit is not going to move!